No. 6082-35A
Inlet HEPA filtration,
outlet chemical vapor filtration.
Curing/Drying Cabinet
Provides continuous wash of filtered air (HEPA or ULPA)
for clean, controlled adhesive curing, PC board drying,
and parts storage
Exhaust purification system removes odors and chemical
vapors from air-stream for safe indoor release
304 Stainless steel shelves can be adjusted on racks to accommodate
various part sizes
Select static-dissipative PVC storage cabinets for maximum
static and particle control
This versatile cabinet is ideal for drying PC boards after
epoxy coating or solvent cleaning, as well as in other applications
requiring a high-volume wash of particle-free air to dry and
clean sensitive materials.
Dual Filtering Capability Removes
Particles and Fumes
These versatile cabinets can be equipped to provide dual filtration.
A powerful 740 CFM blower with adjustable speed controls forces
incoming air through a HEPA particle filter, rated 99.99%
efficient with particles 0.3 µm in diameter, and then
horizontally through the storage area (99.999% ULPA filters
are also available).
The filtered air exits the cabinet through perforations on
the opposing wall of the cabinet. Systems are also available
with a filter housing on the exhaust side to facilitate final
filtration (either HEPA or ULPA).
A second filter/blower system can be added in place of these
exhaust openings to allow duct-free exhaust purification and
release. These modules draw exhaust fumes through an activated
carbon filter and an optional final particle filter to allow
safe indoor venting. Equipped with dual opposing filter/blower
modules, this drying cabinet maintains optimal air flow speeds
and control over particles and chemical fumes to ensure both
safe, effective parts drying and also full compliance with
environmental safety regulations.
Clean, Practical Construction
The storage cabinet is available in several sizes and configurations
to meet individual requirements. Each chamber includes dual
electropolished 304 stainless steel racks that allow height adjustment
of 304 stainless steel shelves in .5-inch increments to meet varying
clearance requirements (order shelves separately).
Select cabinets of either acrylic or transparent static-dissipative
PVC, a durable material that eliminates build-ups of surface
charges (which are commonly generated by standard plastics).
Static-dissipative PVC, which features a surface resistivity
of about 107 ohms/square cm, also helps ensure
cleanliness by eliminating particle attractions created
by charged surfaces. All cabinets made of static-dissipative
PVC feature grounded racks and ground terminals to allow
easy connection to your in-house ground.
Custom Configurations Available!
These drying cabinets can be ordered in custom sizes, and
with special shelving configurations and parts fixtures,
to meet your requirements. Simply fax us your specifications—we'll
provide a quotation on a system tailor-made to your application!
Specifications
Chamber
Inside Dimensions:
25.625"W x 24"D x 12"H (minus 1.062" on each
side for electropolished 304 stainless steel racks)
Construction:
Solvent-welded acrylic or static-dissipative
PVC with electropolished hinges and chrome-plated
latches. One-piece closed-cell extruded gaskets
maintain air-tight seals. Filter/blower housings
are black acrylic (dissipative PVC available on
a custom basis)
Blower:
740 CFM, 1560 RPM impeller-type for inlet modules;
1200 CFM, 1675 RPM impeller blower for exhaust
modules.
For
Particle Protection
(Inlet
and Outlet Filtration)
3 or 6 Chambers
5 or 10
Chambers
Hardware Clearances
(add to nominal dimensions)
Drying/Curing
Cabinets: Inlet Filter/Blower and Exhaust Filter
(Order
desired filter(s) separately, below)
All dimensions exclude hardware.
1 Includes inlet filter housing with one 740 CFM blower and outlet
(exhaust) housing for one filter (order filters separately) 2 Includes inlet filter housing with two 740 CFM
blowers and outlet (exhaust) housing for two filters (order
filters separately)
*Acrylic is damaged by alcohol and other cleaning agents.
For
Particle and Chemical Vapor Protection
(Inlet
and Outlet Filtration)
3 or 6 Chambers
5 or 10 Chambers
Hardware Clearances
(add to nominal dimensions)
Drying/Curing
Cabinets: Inlet and Exhaust Filter/Blower(Order desired
filter(s) separately, below)
1
Includes inlet filter housing with one 740 CFM blower and outlet
filter housing with one 1200 CFM exhaust blower (order filters
separately) 2 Includes inlet filter housing with two 740 CFM
blowers and outlet filter housing with two 1200 CFM exhaust
blowers (order filters separately)
*Acrylic is damaged by alcohol and other cleaning agents.
Other Options
Stands — Made of stainless steel. Includes leveling feet.
Filters
One filter per blower is required (see charts above). HEPA or ULPA filters may be combined with purification filters to provide final particle filtration.
Acrylic attracts and aggregates particles, adding to cleaning costs. It's difficult to sterilize. It poses a serious ESD (electro-static discharge) threat.
Print
Save
