 |
| IonGrid™ Ionizing Filter/Fan
Unit (shown above) incorporates ionizing bar into HEPA
or ULPA ceiling blower for turnkey convenience. |
Clean Room IonBar™ — Modular Clean Room Accessories
- Provides a continuous stream of static-neutralizing
ions to protect sensitive materials against ESD
- Enhances cleanliness by neutralizing charges that attract
and hold particles on wall, tabletops and other surfaces
- Attaches to cleanroom ceiling T-grid
without disrupting the laminar flow in the cleanroom
- Also ideal for glove boxes and flow hoods
- State-of-the-art technology guarantees
intrinsically balanced ionization
- Requires no calibration—automatically
maintains ion balance of ± 50 volts
The Ionizing Bar generates a balanced stream
of positive and negative ions to neutralize surface static
charges, safeguarding ESD-sensitive materials.
State-of-the-art technology makes it one
of the most reliable ionizers available. It emits equal numbers
of positive and negative ions and requires no calibration
or adjustments. Steady-state DC ion emission provides effective
discharge, and mounting beneath ceiling filter/fan units ensures
even distribution throughout the area below.
Discharge times directly under the Bar average
28 seconds (from ± 1,000 volts to 100 v olts,
measured in a 4-foot laminar flow hood in accordance with
Ionization Standard ANSI ESO/ESD S3.1-1991 of the ESD Association).
| Specifications |
|
| |
24 VAC (transformer included with 2005-37) |
| Power Indicator: |
Red LED |
Ion Emission: |
Steady-state DC, 104mA current draw |
Emitter Points: |
Replaceable machined titanium, 3-year
estimated life (field replaceable) |
Air flow: |
50 fpm (.030 m/s) minimum required at
bar for proper operation |
Dimensions: |
2.1"H x 1.2"W x 44" (5.3 x 3.0 x 111.8
cm) |
Cleanroom IonBar™
| IonBar™ |
IonBar ™ with Installation Kit* |
 |
Cat.
# |
$/Each |
110VAC |
220VAC |
| Cat.
# |
$/Each |
Cat.
# |
$/Each |
| 11"L
with 2 emitters |
2005-05A |
Login
|
— |
— |
— |
— |
| 22"L
with 4 emitters |
2005-06A |
Login
|
2005-47 |
Login
|
2005-47-220 |
Login
|
| 33"L
with 6 emitters |
2005-16A |
Login
|
2005-48 |
Login
|
2005-48-220 |
Login
|
| 44"L
with 8 emitters |
2005-07A |
Login
|
2005-49 |
Login
|
2005-49-220 |
Login
|
*Includes ionizing bar, power supply, and installation kit; Ionizing kit and FFU must be ordered together.
| |
|
|
IonBar™
Ionizing Bar—uninstalled
Order low-voltage transformer separately.
 |
Cat.
# |
$/Each |
| 33"L
with 6 emitters |
2005-16A |
Login
|
| 44"L
with 8 emitters |
2005-07A |
Login
|
|
|
Retrofit Kit
Allows mounting of IonBar to Fan/Filter Unit (order IonBar and FFU separately)
| Size |
Cat.
# |
$/Each |
| 2’ x 4’ |
2005-26 |
Login
|
| 2’ x 3’ |
2005-23 |
Login
|
| 2’ x 2’ |
2005-22 |
Login
|
|
| |
|
|
Transformers
One transformer drives 10 bars.
|
Cat.
# |
$/Each |
| 110VAC,
50/60Hz |
2005-09A |
Login
|
| 220VAC,
50/60Hz |
2005-09A-220 |
Login
|
|
|
Replacement Emitters
Easy-to-replace titanium tips pull out and push into
bar. Approximately 3-year service life.
| Cat.
# |
$/Pair |
|
2005-45 |
Login
|
|
|