Floor-Mount No. 2121-02

Wall-Mount No. 2121-04

Hand/Glove Cleansing Stations

• Cleanses hands of particles, microorganisms, and sodium from fingertips to wrist
• Standardizes cleansing process through microprocessor control of cycle, duration, and amount of cleansing agent injected
• Saves time—requiring only 10-15 seconds for thorough cleansing
• Ideal for compliance monitoring—cycle counter helps you verify SSOP, HACCP and GMP programs
• Self-clean cycle eliminates bacteria colonization (floor mount models)
• Stainless steel, water-resistant construction—suitable for wet cold environments (NEMA 4x or 6 rated)
• Dries gloves in 10-20 seconds and hands in 20-30 seconds with air curtain option
• Conserves water using only one-half gallon per cycle with a high-velocity, low-volume spray

This Hand/Glove Cleansing Station is based on a unique, patented method for delivering cleansing solution and/or water to the hands.

Microprocessor-Controlled Standardization

Washing is initiated automatically by means of an optical proximity scanner, and the duration of the washing cycle may be set to last from 6 seconds to 20 seconds (preset at 12 seconds). The system has an automatic 20-second self-cleaning cycle, which can be preset to occur at intervals of either 8 or 24 hours, or after either 64, 128, or 256 wash cycles.

Note: Wall-mount models do not include self-clean cycle but do feature a cycle counter and solutions monitor gauge.

Floor mount models using tap water generally require a disinfectant self-clean solution, especially in high-volume applications (300 or more cycles per day); order separately. Floor-mount models using DI water inject DI water during self-cleaning (they do not aspirate solutions).