Preferred Client

pharmaceutical coompounding glove box
Model No. 2900-46A (in photo above and illustration below) with flow-through design.
glove box illustration

Laminar Flow Glovebox Isolator (LFGI)
Pharmaceutical Compounding Chamber

Helps meet USP<797> requirements for Compounding Aseptic Isolators (CAIs)

  • Low-noise, low-vibration filter/fan unit provides continuous vertical flow of 99.99% particle-free air to meet Class 100 (ISO 5) cleanliness standards
  • Stainless steel enclosure is easy to clean and disinfect
  • Large, ergonomically sloped polycarbonate viewing window tilts open to allow insertion of filling machines or other large process equipment
  • Isolated antechamber features swing door for easy insertion/removal of IV bags and other small items
  • Magnehelic® gauge monitors internal positive pressure inside the enclosure that prevents infiltration of contaminants
  • Includes externally mounted fluorescent illuminator
  • IV rod securely holds hanging IV bags in easy reach
  • Waste port available for disposing of materials through glovebox floor or side
  • Choose among one-piece gloves or two-piece accordion glove and sleeve options

NOT SUITABLE for use with bio-hazardous powders and other materials. Call Terra for information on Compounding Aseptic Containment Isolators (CACIs), which provide safe containment and ventilation of cytotoxins.

Swing-up access door  

Isolated antechamber

  IV rod
Swing-up access door
and isolated antechamber
  Isolated antechamber with separate swing-out access door for each insertion/removal of filling bags, syringes, and other small items   Includes IV rod
Glovebox Specifications
Overall dimensions: 50"W x 30"D (at bottom)/27"D (at top) x 38"H (nominal, excluding filter/fan unit)
Antechamber: 14"W
Processing Chamber: 32.5"W x 29.5”D (at bottom) x 38”H, with pneumatic tilt-up door (27.38”W x 31.5”H opening)
Housing: 304 stainless steel
Viewing Windows: Polycarbonate (.25" thick) with swing access door
Glove Ports: 10" diameter (order desired gloves separately)
IV Rod: 0.25" stainless steel rod mounted 3" from the filter face
Pressure Gauge: 0 - 1.0" Magnehelic® gauge monitors internal positive pressure
Lighting: External-mount fluorescent fixture
Filter/Fan Unit Specifications
Filter/Fan Unit: 24" x 48" low-vibration impeller blower module with direct-drive, continuous-duty two-speed fan and 99.99% efficient HEPA filter (rated @ 0.3µm particle size); operates at less than 50dBA
Full-load Amps: 3.0 (for 120V, 60Hz)
Average CFM: 644
Air Speed:  100 (low speed); 120 (medium speed); 140 (high speed)
Watts: 160 @ 90FPM
Prefilter/Exit filter: Polyurethane foam
Before you order,
  Consider Your Options!
    Specialty Plastics
    Specify any of these systems in dozens of other materials.
    QuickQuote Planner
 
Pharmaceutical Compounding Chambers,
Flow-Through Design
Power Cat.# $/Each
120VAC 2900-46A Login
220VAC 2900-46A-220 Login

Options and Replacement Filters

polyurethane exit filter
bag-out waste chute   Optional bag-out waste chute can be positioned on chamber floor or side
Cat.# $/Each
Replacement polyurethane exit filter 2900-47 call TUI
Waste Port (6" dia.) Cat.# $/Each
Glovebox floor mounting * 2900-48 Login
Glovebox sidewall mounting
(45° angle from right side wall)
2900-49 Login
*Standard mounting: 18" from front 7" from side.
 Requires stand or table with 7"-dia. cut-out.

 
IonBar
IonBar™ (installed below Filter/Fan)
Safe static neutralization.
Cat. # $/Each
33" Long 2005-38 Login
44" Long 2005-37 Login
 

Stands
Glove Box Stand   Stands for Series Compounding Gloveboxes
Constructed of all-welded 2" square tubing. Select oven support for use with Terra's High-Performance Pass-Through Oven
(No. 5401-00A). All stands raise chambers 30" off of floor (add 3" for casters).
Sterile Compounding Chambers (Laminar Flow Glovebox Isolators) Corresponding Stand
Type Dimensions
(W x D x H)
304 Stainless Steel 304 Stainless Steel Powder-Coat Steel
Cat. # $/Each Cat. # $/Each Cat. # $/Each
Pass-Through 50" x 30"/27" x 51" 2900-46A Login
1694-80 Login
1694-81 Login

Casters
Casters (for "A" Base Tables Only)
  Cat.# $/Each
Set of 4, 2 with locking brakes 1700-43 Login

Gloves and Sleeves 
G.O.S Glove over sleeve— ideal for sterile applications. Can be replaced from inside the box. G.U.S. Glove under sleeve— Ideal for protecting operator against hazardous materials
Neoprene Gloves for 10" Port
Hand Size glove _sleeveOne-Piece Bonded Neoprene
Hand & Sleeve
gloveNeoprene Gloves 13" long,
unlined textured grip
sleeveNeoprene Sleeve Sections
22" long
Cat. #/Pair $/Pair Cat. #/Pair $/Pair Cat. #/Pair $/Pair
8 1689-53 Login
1670-83 Login
1690-92
with G.U.S. connectors
(see above)
Login
9 1689-55 Login
1670-84 Login
10 1689-56 Login
1670-85 Login
Hypalon Gloves for 10" Port
Hand Size glove _sleeveOne-Piece Fully-Dipped Hypalon
Hand & Sleeve. Ambidextrous
gloveHypalon Gloves 14" long,
unlined textured grip
sleeveHypalon Sleeve Sections
22" long
Cat. #/Pair $/Pair Cat. #/Pair $/Pair Cat. #/Pair $/Pair
9 1671-17 Login
1671-05 Login
1671-18
with G.O.S. Connectors
(see above)
Login
Butyl Gloves for 10" Port
Hand
Size
glove _sleeveOne-Piece Fully-Dipped Glove
Lightweight (.015) Heavyweight (.030)
Cat. # /Pair $/Pair Cat. # /Pair $/Pair
9 1671-15 Login
1671-16 Login
Butyl Gloves for 10" Port continued
Hand
Size
gloveGloves 14" long sleeveSleeve
17 mil 32 mil Lightweight (.015) Heavyweight (.030)
Cat. # /Pair $/Pair Cat. # /Pair $/Pair Cat. # /Pair $/Pair Cat. # /Pair $/Pair
8 1670-73 Login
1670-78 Login
1670-10
Login
1670-11 Login
with G.U.S. Connectors
(see above)
9 1670-74 Login
1670-79 Login
 
10 1670-75 Login
1670-80 Login