Print
Share
Labconco FreeZone® Freeze Dryer Accessories and Compatible Products |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Vacuum Pumps
Rotary Vane Direct Drive Vacuum Pumps provide a reliable vacuum source for a variety of laboratory products including FreeZone® Freeze Dry Systems, Protector Controlled Atmosphere Glove Boxes and CentriVap Centrifugal Concentrators. General Purpose Pumps are available with displacement capacities of 108, 117, 173 or 195 liters per minute (at 60 Hz). Chemical-Resistant Pumps have a displacement capacity of 173 liters per minute (at 60 Hz).
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rotary Vane Direct Drive Vacuum Pumps: Compatible with Labconco FreeZone® Freeze Dry Systems: 1 Liter Benchtop, 2.5 Liter Benchtop, 2.5 Liter Console |
|||||
| Labconco # | Displacement Capacity |
Electrical Specification | Dimensions W" x D" x H" (mm) |
Cat. # | $/Each |
| 1472100 | 117 L/min | 115V, 50/60Hz, 4.6 amps, Domestic | 6.5 x 17.0 x 10.4 (165 x 432 x 264) |
3643-79 | Login |
| 7739402 | 117 L/min> | 230 volts, 50/60 Hz | 6.5” x 17.0” x 10.4 (165 x 432 x264) |
3643-81 | Login |
 |
Combination Pumps
ChemVac Combination Pumps integrate a high performance rotary vane pump with a chemical-resistant diaphragm pump to create a low maintenance, longer-lasting pump. The diaphragm pump removes the condensable vapors in the rotary vane pump before they can contaminate the oil, thus extending the life of the oil and ultimately the life of the pump. Pump oil lasts up to 10 times longer than in conventional rotary vane pumps under virtually any condition. Long periods between oil changes reduce cost and down time.- Designed for use with acids and other chemicals including TFA, TFA by-products, acetonitrile, HBr and HNO3, present in samples such as HPLC-prepared and peptide purified materials
- Combination pump system consists of a two-stage rotary vane pump and two-stage, chemically-resistant diaphragm pump.
- A pressure control valve compensates for the different volumes displaced by the two pumps.
- Ultimate vacuum (partial pressure) <3 x 10 ^ (-3) mBar (2.25 micron)
- Ready to use and fully charged with vacuum pump oil (approximately 1 liter)
- .75" OD inlet adapter
- Includes power switch, power cord and plug.
| Combination Pumps: Compatible with Labconco FreeZone® Freeze Dry Systems: 1 Liter Benchtop, 2.5 Liter Benchtop, 2.5 Liter Console |
|||||
| Labconco # | Displacement Capacity |
Electrical Specification | Dimensions W" x D" x H" (mm) |
Cat. # | $/Each |
| 7584000 | 110 L/min | 115V, 60Hz, 3.2 amps, Domestic | 18.9 x 9.0 x 15.0 (480 x 229 x 381) |
7906-19 | Login |
| 7584002 | 110 L/min | 230V, 50/60Hz, 1.6 amps, Domestic | 18.9 x 9.0 x 15.0 (480 x 229 x 381) |
7906-20 | Login |
 |
| 12-Port Drying Chamber |
 |
| Clear Drying Chamber |
Drying Chambers
12-Port Drying Chamber
12-Port Drying Chamber, provides a convenient means to attach samples to a freeze dry system. Complete with twelve valves that accommodate both .5" (13 mm) or .75" (19 mm) adapters. Made of type 304 stainless steel. Includes .5" (13 mm) thick, clear acrylic cover and gaskets.
Clear Drying Chamber with Valves, Small
Clear Drying Chamber with Valves provides a convenient means to attach samples in flasks to a freeze dry system while providing visibility into the chamber during bulk drying. Includes 1-.5" (38 mm) thick aluminum lid; eight neoprene valves with molded plastic knobs for use with both .5" (13 mm) or .75" (19 mm) adapters; clear acrylic attachment port lid with 3" (76 mm) diameter opening and neoprene gasket.| Drying Chambers | ||||
| Labconco # | Dimensions in. (mm) |
Compatible with FreeZone |
Cat. # | $/Each |
| 7522800 | 8 diameter x 9.75height (203 x 248) |
1, 2.5 | 3647-84 | Login |
| 7443500 | 14.62 diameter x 12.16 height (371 x 309) |
1, 2.5 | 3647-85 | Login |
 |
4-Port Manifold
Ideal for lyophilizing samples in smaller flasks. Type 304 stainless steel, complete with four valves that accommodate both .5" (13 mm) or .75" (19 mm) adapters for connection of flasks.| Manifolds | ||||
| Labconco # | Dimensions W" x D" x H" (mm) |
Compatible with FreeZone |
Cat. # | $/Each |
| 7522200 | 8.7 x 8.7 x 9 (221 x 221 x 229 |
1, 2.5 | 3647-86 | Login
|
 |
Fast-Freeze® Flasks
Fast-Freeze® Flasks attach with adapters to valve ports on Labconco Drying Chambers and Manifolds. A complete Fast-Freeze® Flask consists of a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately as replacement components. Adapters are available in borosilicate glass or stainless steel. Fast-Freeze® Flasks and Adapters are compatible with any brand freeze dryer that has .5" (13 mm) or .75" (19 mm) diameter valve ports.| Fast-Freeze® Flasks | ||||
| Labconco # | Dimensions mm |
Volume mL |
Cat. # | $/Each |
| 7540000 | 34 diameter x 76 height | 40 |
3647-87 | Login |
| 7540200 | 34 diameter x 115 height | 80 | 3647-88 | Login |
| 7540300 | 59.2 diameter x 68 height | 120 |
3647-89 | Login |
| 7540400 | 59.2 diameter x 85 height | 150 |
3647-90 | Login |
| 7540600 | 59.2 diameter x 145 height | 300 |
3647-91 | Login |
| 7540800 | 90.2 diameter x 135 height | 600 | 3647-92 | Login |
| 7540900 | 90.2 diameter x 190 height | 900 |
3647-93 | Login |
| 7541000 | 90.2 diameter x 240 height | 1200 | 3647-94 | Login |
| 7541200 | 90.2 diameter x 380 height | 2000 |
3647-95 | Login |
| Adapters | ||||||
| Straight Adaptor | 45° Bend Adaptor | |||||
| Diameter | Labconco # | Cat. # | $/Each | Labconco # | Cat. # | $/Each |
| Borosilicate Glass | ||||||
| 0.5” (13 mm) flask top to 0.5” (13 mm) valve | 7545000 | 3647-97 | Login
|
7545600 | 3647-97-45 | Login
|
| 0.25” (6 mm) flask top to 0.75” (19 mm) valve | 7545200 | 3647-98 | Login
|
7545800 | 3647-98-45 | Login
|
| 0.5” (13 m) flask top to 0.75” (19 mm) valve | 7545400 | 3647-99 | Login
|
7546000 | 3647-99-45 | Login
|
| 0.5” (13 mm) flask top to 0.5” (13 mm) valve | 7545400 | 3647-99 | Login
|
7546000 | 3647-99-45 | Login
|
| Stainless Steel | ||||||
| 0.5” (13 mm) flask top to 0.5” (13 mm) valve | 7547000 | 3647-97-SS | Login
|
7547400 | 3647-97-SS45 | Login
|
| 0.75” (19 mm) flask top to 0.75” (19 mm) valve | 7547200 | 3647-98-SS | Login
|
7547600 | 3647-98-SS45 | Login
|
Copyright 1999 — 2012 Terra Universal. Inc. All rights reserved.
All prices and specifications are subject to change without notice. Blue Prices indicate products with quantities in stock according to computer balances, but subject to prior sale or error. Crating charges apply to selected items. Call or click below for more information on terms and conditions.
Schraff | Site Design and SEO
