SteamScrubber and FlaskScrubber Laboratory Dishwashers from Labconco

Labconco laboratory glassware washers have specialized features to meet the laboratory's demand for superior cleaning and convenience. SteamScrubber Glassware Washers have top and bottom racks that accommodate accessory inserts for a wide variety of glassware shapes and sizes, primarily beakers and other wide-mouth glassware. FlaskScrubber Glassware Washers have a spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. All racks are interchangeable among washers.

SteamScrubber Undercounter Model

SteamScrubber Dishwashers with Two Racks for General Purpose Labware

• LED displays program selected or details of the program.
• Flexible cycle options allow you to change wash and dry cycle duration and number of rinses.
• Upper and lower rotating wash arms with adjustable height center tower distribute up to 60 gallons (227 liters) of water per minute.
• Tower adjusts to accommodate various glassware heights.
• Built-in forced air drying system
• Dual heaters boost water and glassware temperatures: With minimum inlet temperature of 120° F (49° C), the sump heater elevates water temperature approximately 20° F (11° C)
• Dry or liquid detergent dispenser

FlaskScrubber Freestanding Model

FlaskScrubber Dishwashers for Narrow-Neck and General Glassware

• Flexible cycle options allow you to change wash-and-dry cycle duration and number of rinses
• 34 detachable stainless steel spindles with stainless steel spring clips accommodate flasks from 1 to 2000 ml
• Patented vacuum drying system ensures that inside bulbs of flasks are completely dry
• Two 4-inch and two 6-inch Adjustable Glassware Holders gently position wider-mouth glassware over spindles.
• Dispenser for neutralizing solution allows addition of mildly acidic rinse solution to alter pH and eliminate alkaline detergent carry over
• Steam generator produces hot vapor to penetrate and soften dried residue, allowing detergent and hot water to work effectively.
• Built-in purified water pump draws from a storage tank or pressurized system to deliver pure water during final two rinses.

FlaskScrubber Glassware Washers are designed to wash and dry narrow-neck and general purpose labware. They have a lower spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Forced air drying through the spindles ensures thorough drying inside and out. Specialized inserts for pipettes, BOD bottles, petri dishes, culture tubes and small utensils enhance the FlaskScrubber's versatility.