 |
 |
Data Logger positioned in a desiccator.
See Data Logger display chart below. |
| |
| |
USB-502 RH/Temperature Data Logger
- Recommended for use in every Terra desiccator and glovebox!
- Easy to use—no training required
- Stores 16,382 temperature readings and 16,382 relative humidity measurements
- All software included to install, configure and download data
- Software includes powerful strip chart and export to Excel®
- Protected against moisture to IP67 standard when cap is installed
- Battery-operated
The USB-502 logs up to 16,382 temperatures and 16,382 relative humidity measurements concurrently.
Simply plug the USB-502 logger into any USB port on your PC—use the intuitive software to name the logger, set your start time and date, sample rate, units (ºC or ºF), and hi/lo alarms—and you're ready. Just place the logger in your Terra desiccator, glovebox, or other enclosure and leave it. Status is indicated by flashing red/green and amber LEDs.
When you're through collecting data, plug the logger back in the USB port, download and save the data to your hard drive, display the data in a powerful strip chart, and/or export your data to an Excel® spreadsheet! |
| Specifications |
| RH Measurement Range: |
0 to 100% RH |
| RH Accuracy: |
±3.5% from 20-80% RH |
| Temp. Measurement Range: |
-31 to +176ºF (-35 to +80ºC) |
| Temp. Accuracy: |
±2ºF (±1ºC) |
| Selectable Sampling Intervals: |
10 sec, 1 m, 5 m, 30 m, 1 hr, 6 hrs, 12 hrs |
| Power Supply: |
one 3.6V 1/2AA lithium battery |
| Dimensions: |
4.06”x1.04”x1.04” |
|
Print
Save
