Modular Stacking Tote Boxes

• Divider grooves on 1.25" centers let you form storage compartments to fit parts of varying sizes
• Rigid-lip permits stacking without applying pressure to contents
• Snap-On lids hold material firmly in place, protect against contamination
• Choose among many dimensions
• Available in conductive and anti-static high-density polyethylene

These modular tote boxes and dividers let you form exactly the bin sizes you need for your stored materials. They can be stacked with or without Snap-On lids—their rigid design won’t put any weight on their contents.

They are vacuum-formed from sheets of high-density polyethylene. This material is impervious to oils, most chemicals, rot, solvents, and temperature extremes. Vacuum forming produces a stress-free container with maximum resistance to cracking from impacts and other environmental conditions.

Choose from a host of sizes and from two materials: black conductive boxes typically offer a surface resistivity between 10³ and 10⁵ ohms/square, and blue static-dissipative boxes provide a typical surface resistivity under 10⁹ ohms/square (see specifications). Static-dissipative boxes meet the minimum static decay specifications per MIL-B-81705B and fall into Class 2 and Class 3 sensitivity levels defined in DOD Handbook 263.

Rigid lip lets you stack tote boxes without putting pressure on contents

Standard molded-in snaps allow attachment of labeling pouches.

How to Order Modular Stacking Tote Boxes

1. Select the tote box for your application (notice that each size is available in either conductive or static-dissipative high-density polyethylene).
2. Select any corresponding dividers you require. “Length” dividers run the length of the tote box; “Width” dividers run the width. Dividers fit into the divider grooves on each tote box (on 1.25" centers) and interlock to form adjustable bin compartments of 1.125" x 1.125' or multiples thereof.