CSA-listed cleaners provide thorough, safe cleaning of
small- and medium-sized parts
Seven sizes give you the choice of just the right capacity
cleaner for your needs
Recessed cleaning tank minimizes spills and drips
Specialized models accommodate pipets and very small
parts
Cleaners available unheated with a mechanical timer,
heated with mechanical timer; or heated with digital timer,
heat controls and degas function
These Branson cleaners offer seven ways to get the full,
efficient power of ultrasonic cleaning at an affordable price.
They give parts the ultrasonic scrub that cleans the way no
conventional methods can, but will not damage even the most
sensitive components. Their unique penetrating action gets
at dirt and grease hidden away in tiny cracks and crevices
by generating millions of microscopic vacuum bubbles that
scrub the surface as they implode.
These CSA-listed, low-cost ultrasonic cleaners range in capacity
from one pint to 5.5 gallons and are warranted for two years
(one year for Series B3 and PC620). They can be used with
a wide variety of aqueous solutions to clean small and medium-sized
parts. All units are integrated with cleaning tank and generator
in one enclosure. All XX10-series models include 42khz industrial
stacked transducers, which increase reliability and power,
and a "sweep frequency" that results in uniform cleaning and
eliminates hot spots. The tanks are made of rugged stainless
steel with no corner welds or other dirt-catching surfaces,
and are enclosed in durable, attractive, impact-resistant
plasticor sheet metal (PC620). Because the tanks are recessed, you won't have to
worry about spills and drips. And these cleaners are durable;
the toughest cleaning solutions won't hurt them, and bumps
won't dent them. The outer plastic case makes these units
easier to move and carry. Larger models feature recessed handholds.
All circuitry is solid state for long, trouble-free service
(no fans or other moving parts). Every cleaner is equipped
with an R.F.I. filter that meets FCC radio frequency standards.
Select among seven basic units and several configurations.
The smallest unit (B3 below) is available as an unheated model
only. Series PC620 features a rectangular tank that is available
in heated and unheated versions without a timer.
The other five models can be ordered in three configurations:
unheated with a mechanical timer; heated with a mechanical
timer; or heated with digital timer, heat controls and degas
function (which allows immediate use at maximum efficiency).
Models with mechanical timers include a hold button for continuous-mode
operation. Models with digital timers allow exact cleaning
cycles up to 99 minutes (mechanical timers are 60 minutes).
All models except series PC620 come with a tank cover and
are designed for operation at 117VAC, 50/60Hz. Models are
also available for 220/240-volt operation.
Models 3510, PC620, 5510 and 8510 include drain.
Safety Notes: These water-based
units are not designed for solvent cleaning. To prevent damage,
maintain liquid level 0.5" to 1" from tank top.
Branson
Series**
Tank
Dimen.
Overall
Dimen.
Tank
Capacity
Wt
Volts
Unheated
Cleaners
With
Mechanical Timers
Heated
Cleaners
With
Mechanical Timers
Heated
Cleaners
With
Digital Timers,
Heat Control, Degas
Model #2601-00 features a round tank and
is not available with heater. Models #2607-00 and #2608-00
feature
a long rectangular tank and are ideally suited for cleaning
pipets (not available with timers or digital controls).
**
Tank covers included for all except the
PC620 series.