Model No. 2005-55

Cleanroom Ionizing Air Gun Cat. # $/Each Ionzing Air Gun Includes 120VAC Power Supply and 0.4-micron Inline Filter 2005-55 Login Ionzing Air Gun Includes 230VAC Power Supply and 0.4-micron Inline Filter 2005-55-220 Login Replacement Ionizing Power Transformer 120VAC, 50/60Hz 2005-09A Login 220VAC, 50Hz 2005-09A-220 Login Replacement In-Line Capsule Filters 0.04-micron particle retention 2005-52 Login 0.4-micron particle retention 2005-53 Login Replacement Emitter Points 2005-45 Login

• Quickly and safely neutralizes static surface charges to protect sensitive parts against electro-static discharge
  
• Provides a burst of clean air or nitrogen to dislodge and remove particles held by static attraction
  
• Low-voltage power supply provides intrinsically balanced stream of ions with minimal EMI/RFI
  
• Discharge time: 1000V to 100V in less than two seconds (inlet pressure of 30 psi, measured at 6" from target)
  
• Ergonomic, durable polymer gun is easy to handle and operate without hyperextending the wrist
  
• In-line capsule filters ensure purity of gas feed (clean dry air or nitrogen)
  
• Includes transforrmer and convenient hanging bracket

Terra's Ionizing Air Gun provides a safe, highly effective means of removing small contaminants from sensitive surfaces and minimizing the chance of ESD-related damage.

Safe, Trouble-Free Operation
Its low input voltage (24 VAC) design eliminates shock hazards to both operators and parts. It also minimizes EMI (electro-magnetic interference) making it safe for operation around high-precision electronics equipment.

All components are designed for cleanliness, durability, and safety. The rugged polymer case is designed to minimize strain to operator wrist and hand. The scalloped nozzle tip safely recesses the ion emitters to guard against contact with operator or parts. The gun uses either filtered air or nitrogen to provide the dispersing force necessary to direct the ions to the target surface. It operates with virtually no particle generation, and the force of the ion burst is easy to modify by adjusting the gas feed pressure (recommended pressure: 15 – 30 psi, depending on distance to target surface).

Emitters are made of corrosion-resistant titanium to ensure a long service life — several years when used with filtered gas supply. Tip replacement requires only seconds and entails no disassembly. Specify an optional in-line capsule filter to ensure the purity of the incoming feed gas.

Standard kit includes an Ionizing Air Gun, 8-foot x 0.25"-diameter polyethylene gas tubing, a coiled low-voltage power cable (8 feet when fully extended), transformer and 0.4-micron in-line filter. Cable attaches to the gun and power transformer by means of telephone-type jacks for fast, easy installation. Each transformer provides power for up to 20 air guns.