Diaphragm Vacuum/Pressure Pump
- Oil-less design for low maintenance,
clean operation
- Low cost and extreme reliability make
this diaphragm pump ideal for general-purpose laboratory
applications
- Also suitable for wire bonders, die bonders,
scribers, breakers, probing stations and many other kinds
of microelectronics manufacturing equipment
Oil-free and noiseless operation makes this
motor-mounted unit one of the best suited vacuum pumps available
for cleanroom environments.
It provides an effective vacuum for wire
and die bonders, scribers, breakers, dicing saws and most
other microelectronics manufacturing and testing equipment,
as well as for a wide range of laboratory uses. The connecting
rod in this pump is bonded to its bearingnot clamped,
as in lighter duty pumpsto give it greater strength
and durability under maximum work loads.
Maintenance is a breeze. Changing air filters
is a 60-second screwdriver job. Installing the head assembly
is a fool-proof operation: the non-symmetrical fastener pattern
ensures that the head goes on correctly.
Output air is cool and oil-free, even at
maximum duty. As ambient air enters and leaves the head, it
never goes near the motor, where it might pick up heat and
foreign matter. These cooler temperatures add to overall efficiency
and service life.
Models are available
for 115VAC and for 220/240VAC power, and include a thermotector,
carrying handle, on/off switch, rubber feet, cord and hospital-grade
plug. Pumps include two hose barb fittings, two regulators,
and a 0-30" Hg vacuum gauge and a 0-60 psi pressure gauge.
Performance Curves
 |
| Specifications |
| CFM Free Air: |
1.10 |
| Maximum Vacuum: |
24" Hg |
| Maximum Pressure: |
60 psi |
| Motor hp: |
.125 |
| Power Requirements: |
115VAC, 60Hz, single
phase
220/240VAC, 50Hz, single phase |
| Shipping Weight: |
18 lbs. |
Diaphragm Vacuum/Pressure Pump
| Power |
Cat.
# |
$/Each |
| 120VAC/60Hz |
7903-00 |
Login |
| 220VAC/50Hz |
7903-01 |
Login |
Perfect
Performance for
Low-Vacuum Applications! |
|
This rugged, economical pump
provides the low vacuum levels in Terras
plastic vacuum chambers and Negative-Pressure
Glove Box.
For higher vacuum levels, select
one of our Rotary Vane pumps |

Negative-Pressure
Glove Box |
| |

Vacuum C |
|
| |
|
|