High-Temperature Furnace
- Provides operating temperatures up to
1700°C
- Available in 216 cubic inches
- Choose single set point (SSP) or programmable
automatic temperature controller
- Forced air circulation between inner
and outer walls ensures long life of electronic components,
cool exterior
This performance-engineered high-temperature
furnace is ideally suited for your highest-temperature applications,
such as composite research, precious and exotic metals treatment,
and high-temperature ceramic research.
High-Efficiency
Heating System
It utilizes Super Kanthal 33 Molybdenum disilicide heating
elements for long life at elevated temperatures; the individual
elements can be easily replaced to maximize efficiency and
minimize downtime. Molybdenum disilicide elements do not have
to be matched in resistance when replaced, as do other elements.
This heating system and the use of advanced fibrous insulation
of alumina provide excellent uniformity and outstanding heat-up
time (40 minutes to 1600°C) without overstressing the
heating elements. The heating elements are recessed along
the chamber walls, allowing full access to the working area.
Element mounting is designed to facilitate quick and easy
element maintenance.
Safe Operation
The unique parallelogram-type door mechanism provides safe
and easy door operation. The door movement keeps the hot face
of the door away from the operator to avoid excessive heat
upon opening. The door is spring loaded to assist in easy
opening and closing. A self-aligning door seal is designed
to minimize heat loss and increase chamber uniformity.
The unitized furnace and temperature controller
cabinet reduce benchtop space requirements and enhances convenience
of operation. The outside surface of the case is designed
to remain cool to the touch—even when the furnace is
operating at its maximum temperature of 1700°C.
You can choose a single set-point or programmable automatic
temperature controller. RS232 digital communication is standard
on all controls. Programmable controllers feature multi-programmable
4-stored programs of 8 ramps and 8 dwells, allowing versatile
control over heating and cooling cycles. The programmable
model features ramp rates in degrees per minute and dwell
times from 0.1 to 999.9 minutes. Note: Care must be used not
to program the controller to heat up or cool down at rates
faster than the furnace is able to achieve. This is especially
important if you wish to use a ramp segment for cooling.
Power conditioning or a non-interruptible
power supply is recommended.
These ovens are for sale in the U.S. only.
Chamber Size
(cu. inches) |
Chamber
Dimensions
(W x D x H) |
Overall
Dimensions
(W
x D x H) |
Shipping
Weight |
| Inches |
CM |
Inches |
CM |
lbs. |
Kg |
| A
216 |
6
x 6 x 6 |
15
x 15 x 15 |
28
x 18 x 18.5 |
71.1
x 45.7 x 46.9 |
190 |
86 |
| Model |
Electrical
(50/60 Hz) |
Stabilization |
Temperature
Control
Type |
Cat.
# |
$/Each |
| Volts |
Amps |
Watts |
Amps |
Watts |
| A |
208 |
40 |
8320 |
12 |
2500 |
SSP |
4000-66 |
Login
|
| A |
240 |
40 |
9600 |
10 |
2500 |
P16S |
4000-67 |
Login
|
|
