Print
SaveWrist/Heel Straps Testers and Monitors |
||||||
Combination Tester
|
||||||
| Cat. # | $/Each |
| 1801-67 | Login
|
 |
Wrist/Foot Strap Tester
This dual-function instrument is designed to test standard single-conductor wrist grounding strap assemblies and heel or toe grounders. A mode selection switch allows you to toggle between wrist and foot strap testing modes. Includes four LED indicators: Low Fail, Pass, High Fail, and Low Battery. Operates on one 9VDC battery or from an optional 120VAC power adapter.
| Cat. # | $/Each |
| 4400-30 | Login
|
 |
Wrist Strap Touch Tester
- Touch-type, on-demand tester is ideal for testing wrist straps and smocks
- Quick and easy installation and grounding of both wrist straps and table mats
- Highly reliable resistance testing—tests the entire circuit including the wrist strap, cord, and skin contact
This Touch Tester provides a fast, convenient way to verify the correct function of grounding wrist straps, smock and table mats.
It is easy to install and connects to utility ground when plugged in. Because it tests the entire grounding circuit, it eliminates the need for any additional test equipment. No other grounds are needed; it acts as common grounding point for the entire work surface. Range: 750 kilohms to 10 megohms. Power: 120VAC, 50/60 Hz. Shipping weight: 0.70 lbs.
| Cat. # | $/Each |
| 1801-66 | Login
|
 |
||||
|
Dual-Operator & Work Station Monitor
- LEDs continuously indicate proper grounding of two mats and two operators
- Mounting system keeps monitor off the benchtop to conserve valuable working space
- Two satellite remote monitors include monitored wrist strap ground, parking stud, and unmonitored ground for guest or equipment
- Audio alarm sounds continuously if wrist strap coil cord is inserted in ground and cord is not connected to worn wrist band
- Utilizes reliable wave distortion technology
This workstation continuously monitors two operators and the work surface to ensure that sensitive materials are protected against electrostatic charges.
Continuous monitoring ensures a static-safe environment throughout the manufacturing operation and eliminates the inconvenience and disruption of periodic testing. This unit uses wave distortion detection technology, which monitors current/voltage phase shifts and provides true, 100% continuous monitoring. A mounting bracket allows mounting the unit at eye level, off the work surface. Use with mat types T2, Z2, L, G2, or any mat that has a conductive layer. Power requirement: 120VAC, 50/60Hz. Shipping weight: 10.20 lbs.
|
|||||||||
|
|||||||||
|
|||||||||
|
|||||||||
|
|||||||||
|
 |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
