Wire-Bond Strength Tester Inspection Station
and Accessories
- Provides cost-effective, on-line destructive and nondestructive
testing
- Delivers smooth motion throughout pull cycle
- Stereo microscope increases precision and reliability
- Variety of pull gauges provide a wide pull range, allow
accurate wire-bond strength measurement
- Optional accessory chuck height adjusts to fit many types of packages
- Meets MIL-STD 883C
This inspection tester package combines cost-effectiveness
and operator convenience in a reliable, precision instrument.
Stereo Microscope Enhances Flexibility
It offers all of the advantages of a standard test but also
incorporates a lightweight stereo microscope that delivers
deep focal fields and high resolution. This feature allows
an operator to perform much more delicate wire-pull tests—including
microscopic hook positioning—than would otherwise be
possible with a less sophisticated wire-bond strength tester.
The exceptional light gathering capability of the system allows
even high-magnification applications with just normal room
light.
Allows Destructive and Nondestructive
Testing
This system’s precise adjustments allow both destructive
and nondestructive testing. In nondestructive testing, you
simply set a predetermined pull strength to be applied to
the unit under test. In destructive tests, the system applies
pull force until the wire bond breaks, allowing you to measure
precisely the strength of the bond.
Calibration weights are available for every pull range so
that you can perform checks of the tester’s accuracy.
For reliable results, calibration checks should be performed
frequently. To ensure that a gauge is in good working order,
simply hang the correct weight onto the pull hook, drop the
swing bracket until the pull arm is horizontal, and then compare
the gauge reading with the weight number. All calibration
weights are manufactured and inspected in accordance with
MIL-STD 45662.
The unit is available for purchase with a single gauge (with hook) of your choice, listed below. Calibration weights, additional gauges and optional accessory chuck sold separately.
For those requiring ultimate testing versatility, Terra Universal also offers a complete package consisting of all five weights (with hooks), five calibration weights, and an accessory chuck.
All units come standard with your choice of 10X or 20X eyepieces.
Additional hooks and calibration weights are available for any wire or gauge size. |
Wire-Bond Strength Test Inspection
Station with Eyepieces
The complete package consists of one tester with microscope
and your choice of eyepieces, base/stand, four pull gauges (35g, 50g, 100g, and 150g) with one hook for each,
four calibration weights (15g, 25g,
50g, and 75g), and an accessory chuck.
| Cat.
# |
$/Each |
|
9101-17 |
Login
|
Spare Eyepieces
|
Print
Save
