Solvent Spray Booth
- Ideal system for corrosive or flammable liquid applications
- Fabricated of 304 stainless steel/safety glass for durability
and safety
- Explosion-proof illuminator meets a broad range of locations
as defined by the NEC
- Provides solvent cleaning/nitrogen drying through dual-service
lines and convenient foot pedal
- Features split-sink for drainage and safe disposal of
solvents
- Includes exhaust system for safe fume venting
- Safely stores chemicals in an enclosed cabinet environment
- Custom modifications available to meet your specific requirements
Terra Universal's Solvent Spray Booth is an ideal system
for cleaning operations in a variety of industries.
Safe, Convenient Operation
This booth's 304 stainless steel construction resists a wide range
of solvents, including lapping oils, alcohol, naphtha and
toluene. A counterbalanced safety glass shield offers convenient
access to the work area, and can be fixed in any desired position
while at the same time protecting the operator's face.
The unit features a split-sink construction providing two
separate work areas, one for solvent rinsing and the other
for nitrogen or air drying. Dual 304 stainless steel service lines
allow connection to a liquid solvent and nitrogen/air source,
which are dispensed by means of dual pneumatic foot pedals
through nozzles located above the sink.
The split-sink located beneath the perforated work surface
allows for drainage and safe disposal of solvents. This unit
also includes an enclosed cabinet with 2.5-gallon polypropylene
reservoirs providing safe and secure storage of chemicals.
Additional service lines can be installed to allow use of
additional solvents. Plumbing is also available in other materials,
including Teflon® and polypropylene allowing
for safe operations with other chemicals.
The standard 100W incandescent hazardous-environment illuminator
meets a broad range of locations as defined by the National
Electrical Code (NEC): Class 1, Div. 1 and 2 (Groups C and
D); Class II, Div. 1 and 2 (groups E and F); and Class III,
Div. 1 and 2 (all groups). It is thus suitable for locations
in which ignitable mixtures exist under normal conditions.
An additional feature of this system is a 10"-diameter duct
on the rear of the panel, allowing for the safe venting of
fumes from the work area.
| Specifications |
Construction: |
304 stainless steel with safety glass side and
front panels (other materials including polypropylene,
available on a custom basis) |
| Dimensions: |
|
| |
Overall: |
48"W x 43"D x 81.373"H (custom sizes available) |
| |
Work Area: |
48"W x 30"D x 40"H |
| |
Weight: |
160 lbs. |
| Utilities: |
|
| |
Gas Line: |
(2) Quick connect/disconnect fitting for .25" gas
line |
| |
Solvent Line: |
(2) .25"ID 304 stainless steel |
| |
Cat.
# |
$/Each |
| 110VAC/60Hz |
1530-41 |
Login
|
| 220VAC/50Hz |
1530-41-220 |
Login
|
|
Print
Save
