FREE CONSULTATION714-578-6100
  1. Home
  2. Benches, Tables & Workstations
  3. Cleanroom & Lab Tables
  4. Laminate-Top Tables

Laminate-Top Tables
Performance, Versatility, and Economy

Modular Cleanroom Work Stations Performance, Versatility, and Economy
Model Shown: No. 1000-00 bench, with No. 1524-50 uprights,
1700-76 light and 1000-65 shelf.
The modular construction of Terra work stations lets you order the work surface and accessories you need, straight from stock. Their lock-in frame lets you adjust height or expand their capabilities as your requirements change. Frame and leg members are fabricated of heavy-duty, all-welded 1.5" or 2" (38 mm or 51 mm) square tubing to support the heaviest loads without sagging. All materials are factory-assembled (shipped finished) and fabricated to meet or exceed Class 100 cleanroom standards.

Lock-In Light/Shelf Assembly—
Houses a light fixture, ionizing equipment, and as many shelves as you require.

Modular Cleanroom Work Stations Performance, Versatility, and Economy

cleanliness high

Ordering Information
Workstations with Standard Non-Dissipative Tops
Workstations with Dissipative Tops
 
Click any price to add to cart.
Blue Prices show stock on hand. More . . .

Table Configurations

Benchtops are available in 304 stainless steel, standard non-dissipative or dissipative laminate, and polypropylene.
 
"A"-Base Design
(shown with 36" uprights, light and shelf)
 
"C"-Base Design
(shown with 18", 457 mm, uprights and shelf)
  Modular Cleanroom Work Stations Performance, Versatility, and Economy   Modular Cleanroom Work Stations Performance, Versatility, and Economy
  The adjustable "A"-base models feature telescopic legs that let you adjust the work surface to suit your application, from 25" to 34" (635 mm to 864 mm) floor-to-top. This feature is important if you must maintain a standard work surface height in automated processes. Its retractable design also makes shipping and storage more economical. These benches include nonmarking levelers for stability.   The non-telescoping "C"-base design combines strength with comfort. The sturdy 14-gauge steel tubing and all-welded construction eliminate the need for forward legs under the work surface that bang knees and chairs, thereby helping to isolate the work surface from accidental bumps and jars. The forward ends of the bottom runners are protected by 304 stainless steel scuff guards. All steel members feature an epoxy or powder coat finish (except tables made entirely of 304 stainless steel or electropolished 304 stainless steel). Stainless steel feet are adjustable for proper leveling to eliminate wobbling. "C"-frame tables are 32" (813 mm) high (floor-to-top).

Laminate Benchtop Options

Static-Dissipative Plastic Laminate combines the chemical- and heat-resistive properties of plastic laminate with a controlled path to ground for dissipation of static charge without voltage suppression ambiguity. This laminate has a micro-thin layer of aluminum oxide (Mohs hardness of 9; diamond = 10) integrated directly into its surface, creating an extremely hard protective layer, which provides long-term resistance to surface abrasion. This material has also been specifically tested for particle trapping (see test results below.) Each sheet used in fabrication is individually certified to meet the values set forth at below. Laminate Specifications

These counts are very low. Under the same test conditions, a material which does shed particles would give off thousands of particles in the 10- and 5-micron range. This material is thus certified as cleanroom safe.

Standard Non-Dissipative Laminate shares many characteristics with static-dissipative laminate, except surface resistivity. In surface resistivity tests, this laminate material measured between 4.1 x 1011 and 7.4 x 1012 (omega)/sq. It is generally resistive to most solvents as well as hot solder; however, mineral acids (such as hydrochloric, sulphuric, or nitric acid) should not be allowed to contact to laminate. This material is suitable for cleanroom use and will not outgas.

Ordering Information
Workstations with Standard Non-Dissipative Tops
Workstations with Dissipative Tops
24-hour sales and tech phone support, M - F
Go to...
Go To
Laboratory-Equipment.com