Contamination Control Mats and Floor Coverings
- Removes contaminating particles from shoes and
wheels to help you maintain cleanroom standards
- Cleans easily with a detergent solution and squeegee
- Tolerates heavy loads, and is non-toxic and resistant
to most chemicals.
- Goes on working for years if cleaned regularly
- Available as mats, runners, or for wall-to-wall
- All sizes also available with static-dissipative
|These mats and floor coverings are designed to remove
even the finest particles of foot-borne contamination
simply and effectively, without any tacky carry-over
or damage to shoe covers.
Clean, Durable Particle Traps
Wherever You Need Them! Their unique dust-gathering
properties result from the exceptional coefficient
of friction (3.5µ, using "Tortus" floor friction
tester) in their polyester-compound material. They
also contain a bactericide that effectively prohibits
growth of common bacteria (see specifications below).
Static-dissipative models are available for Low-Profile
Protectamat, Clean-Zone, and Clean-Zone Mat to help
eliminate static charges and the particles they attract.
Given regular cleaning with a detergent solution
and squeegee, they will all go on working cost-effectively
for years. Available in a wide variety of sizes and
thicknesses, and in several different colors, all
of these products are nontoxic, unaffected by X-rays
and gamma rays, and resistant to most chemicals (details
available upon request). They exhibit negligible outgassing
(ASTM E595) and negligible effects of U.V. exposure.
Note: Unless otherwise indicated, specifications
apply to all Clean-Zone, Protectamat, and Low-Profile
Protectamat models specified below.
||Prevents growth of common bacteria (tested
on cultures of pseudonomas aeruginosa and
|Coefficient of Friction:
||3.5µ, using "Tortus" floor friction
|Resistance to earth of 1010 ohms/square and 108 ohms/square
for static dissipative (tested to ASTM
F150, DIN 51953, BS 2050); static decay
of less than 0.05 seconds (5000v to zero).
||32°F to 122°F (0°C to 50°C)
||40kg/sq. cm (570 lbs./sq in.) using a
4000 kg track on 4 wheels, each contact
area being 25 sq. cm
||No evidence of erythema, edema or other
skin reaction after 48 hour period of constant
Clean-Zone Floor Covering
Clean-Zone is supplied in standard rolls, to
be professionally installed as a wall-to-wall floor
covering, creating a permanent and unavoidable trap
for dirt. A 6'-6"-foot width (1981 mm) is available, in blue,
grey, red, or green, in lengths of 10, 20, 30, or
40 feet (3 m, 6 m.1 m, 9.1 m, or 12.2 m). In a static-dissipative form, a 6'-6"-foot
width (1981 mm) is available, in either blue or grey, also
in lengths of 10, 20, 30, or 40 feet (3 m, 6.1 m, 9.1 m, or 12.2 m). Weight: 0.55
lbs./Sq. ft. (.2 kg) The Clean-Zone Floor covering is .09375" (2.3µm) thick.
Note: Includes flooring
adhesive and a seam sealer kit.
Protectamat is a loose-laid polyester mat that attracts contaminating particles, 4-feet (1219 mm)
wide, and available in lengths of 2', 3'3", 6'6",
10', and 13' (610 mm, 1006 mm, 2012 mm, 3048 mm, 3962 mm). All of these mats are dark blue,
and except for the smallest version, they feature
attractive red leader strips at both ends. The
2' x 4' (610 mm x 1219 mm) mat has a thickness of 5 mm, and the other
four 7 mm. Weight: 1.52 lbs./Sq. ft.
||Dycem Part #
||610 x 1219
||1006 x 1219
||2012 x 1219
||3048 x 1219
||3962 x 1219
|*Includes red leaders
For regular use as a bactericide, this concentrated,
water-soluble disinfecting cleaning fluid destroys both
gram positive and gram negative bacteria. Can be used
in cleaning machines.
|Dyclean General Purpose Cleaning
For regular cleaning outside the cleanroom environment,
this concentrated, water-soluble solvent is especially
effective for removing black scuff marks left by shoes
or wheels. Can be used in cleaning machines.
1 Gallon Bottle