Fume & Exhaust Hoods

1 products meet your criteria.

per page
Page 1 of 1

1 products meet your criteria.

per page



Can't find what you're looking for?
Tell us what you need and we'll build it!



SUBMIT A QUICKQUOTE REQUEST


Need Help?

(714) 578-6100

EMAIL CHAT

Mon - Fri, 5:30am - 5:30pm PST

Features and Benefits

UV Germicidal Lamp

The V-Ray germicidal UV lamp is installed within a Terra hood to inhibit microbial growth on the work surface

Bag-In/Bag-Out HEPA Filter Replacement

The bag-in/bag-out HEPA filter replacement system allows trained personnel to safely remove the dirty filters without risking exposure to harmful contaminants.

UV Light Cycle Timer

Operators can set the timer for durations of 5, 10, 15, 30, 60, 120 and 240 minutes or continuous. Upon activation, the timer automatically shows the previous setting, but the operator can easily change the time setting.

Smart-Flow™ Airflow Monitor

The LCD display shows the equipped filter types, the status of the filters, and airflow face velocity. On/off buttons are provided to toggle the blower and light fixture. All settings are programmable and can be electronically locked for security.

Static-Dissipative PVC Sliding Shield, Side Panels

Sliding shield and side panels made of transparent, chemically resistant static-dissipative PVC help contain fumes and protect operator from spills (select preferred work surface and vapor sealed or explosion-proof light separately).

Exhaust Duct Connection

10"-diameter flange allows connection to remote ventilation system for fume removal (explosion-proof ductless models with exhaust fans available).

Easy-Glide Shield

Easy-glide counter-weighted sliding shield made of static-dissipative PVC helps protect operator from chemical splashes and fume exposure; extend fully down to optimize containment efficiency.

Dual Ventilation Blower with Quick-Release Clips

Dual fans ensure fast, efficient ventilation of micro-contaminants. Quick-release clips along the polyproylene filter housing allow fast, easy filter replacement; unit lifts off hood for easy servicing.

Curved Inlet Grille

Supports the user's forearms, eliminating need for hard-to-clean armrests

Guardian Airflow Monitor

A green LED light indicates when airflow is within the programmed acceptable range; a red LED light and an audible alarm will notify operators of an unsafe condition.

Labconco Protector ClassMate Laboratory Fume Hoods Baffle Plates

The 3-piece glass baffle directs airflow upwards to the exhaust outlet, serving as an exhaust plenum similarly to other Labconco fume hoods. Each section of the baffle can be pivoted for regular wipe-down or detached for periodic decontamination.

Fume & Exhaust Hoods

  • Labconco Protector ClassMate Labconco Protector ClassMate
  • Labconco Xpert Balance Enclosure – 8 ft Labconco Xpert Balance Enclosure – 8 ft
  • Labconco Xpert Nano Ductless Exhaust Hood Labconco Xpert Nano Ductless Exhaust Hood
  • Labconco Protector XVS Ventilation Stations Labconco Protector XVS Ventilation Stations
  • Labconco Protector® Echo – Floor Mounted Labconco Protector® Echo – Floor Mounted
  • Exploson-Proof Ductless Fume Hood in Use Powder-Coated Explosion-Proof Ductless Fume Hood
  • Hardwall Modular Cleanroom with Multiple Suites Multi-Suite Hardwall Modular Cleanroom
  • Protector XStream Laboratory Fume Hoods by Labconco
Labconco Protector ClassMate
Labconco Xpert Balance Enclosure – 8 ft
Labconco Xpert Nano Ductless Exhaust Hood
Labconco Protector XVS Ventilation Stations
Labconco Protector® Echo – Floor Mounted
Exploson-Proof Ductless Fume Hood in Use
Hardwall Modular Cleanroom with Multiple Suites
Hide
You need at least 2 products to compare Compare Clear All
Compare Products