Hoods for Wet Processing

32 products meet your criteria.

per page
  1. Wet Cleaning Stations
    Group of 4 products
    7018-PP-03 74273
    From
    $25,761
    cULus LogocULus Logo
    2 Material1 Work Area Depth2 Work Area Width

    Material: Polypropylene, 304 Stainless Steel
    Work Area Depth: 24"
    Work Area Width: 72", 96"
  2. Solvent Spray Booths
    Group of 2 products
    1530-PP-04 71895
    From
    $18,685
    CE Mark LogoCE Mark Logo
    2 Voltage1 Material1 Work Area Depth1 Work Area Width

    Voltage: 120 V, 240 V
    Material: 304 Stainless Steel
    Work Area Depth: 30"
    Work Area Width: 48"
  3. cULus LogocULus Logo
    1 Voltage2 Material1 Work Area Depth4 Work Area Width

    Voltage: 120 V
    Material: Polypropylene, 304 Stainless Steel
    Work Area Depth: 23"
    Work Area Width: 36", 48", 60", 84"
  4. Vertical Laminar Flow Hoods for Wet Processing Benches
    Group of 17 products
    2004-PP-01 72895
    From
    $3,083
    Some ship in 20 - 30 days
    WhisperFlowWhisperFlow
    3 Voltage2 Frame Material3 Filter Type6 Inside Width2 Inside Depth2 Inside Height

    Voltage: 120 V, 220 V, 240 V
    Frame Material: 304 Stainless Steel, Powder-Coated Steel
    Filter Type: HEPA, RSR, HEPA, RSR
    Inside Width: 97", 45", 57", 73", 49", 69"
    Inside Depth: 28", 32"
    Inside Height: 74", 67"
Page 1 of 1

32 products meet your criteria.

per page

Features and Benefits

Integrated Stands Isolates Hood from Work Surface

Built-in stand with dissipative PVC side panels allows VLF Stations to be positioned over any table or processing equipment without transferring hood vibration to work surface (shown integrated with optional modular wet station).

Recessed Lighting and Optional UV-C Sterilization

Included recessed light fixture simplifies cleaning and minimizes airflow disruptions (shown next to optional UV sterilization bulb).

Touchscreen Control Panel

PLC control panel provides control of fan speed, lights, and motorized shield; digital gauge monitors backpressure and issues alerts when filter(s) need replacement

N2 and DI Water Spray Guns

Handy spray guns provide a ready sources of nitrogen or deionized water installed in locations to suit your process requirements (shown: DI water spray gun installed on cleaning station).

Gooseneck Faucet

Angled to dispense water in a focused stream, this faucet is made of chemical-resistant PVC

Motorized Access Shield

Motorized access shield, included on select models, enhances laminar flow and protects operator from chemical fumes and other environmental nuisances.

Explosion-Proof Light

Incandescent illuminator lights up work surfaces and is wired per NEC guidelines. It is appropriate for Class I, II and III, Divisions 1 and 2 applications using ignitable mixtures.

Split Perforated Sink

Damage-resistant, perforated stainless steel surface safely guides liquids down to drains below, but prevents parts from dropping down to drains. Lift up to access drains.

Service Lines

Petcock nozzles above each sink deliver liquid solvents for rinsing and nitrogen/air for drying. Use the quick-connect fittings to feed the lines, and adjustable gauges to modify pressure

Adjustable Rear Baffles

Adjust air flow direction, speed and volume by changing position of the easy-to-reach baffle plates at the rear of the station countertop.

Pneumatic Foot Pedals

Control flow of solvent and nitrogen using these convenient step-on foot pedals in front of each sink in the booth. Hands-free operation reduces contamination.

Exhaust Duct

Spray booth is equipped with exhaust duct to safely carry fumes away from workers. This view from the top also shows the water pipe that feeds sprinklers, and encased wiring for explosion-proof light.

Hoods for Wet Processing

  • Vertical Laminar Flow Tilt-Up Shield Tilt-Up Shield
  • High-Clearance, Wide-Access Vertical Laminar Flow Hoods ValuLine™ Vertical Laminar Flow Stations
  • HEPA Filtration for Particle-Free Airflow HEPA Filtration for Particle-Free Airflow
  • PLC Touchscreen Controls on Vertical Laminar Flow Hood PLC Touchscreen Panel on Vertical Laminar Flow Hood
  • Vertical Laminar Flow Station with Vibration Isolated Work Surface Isolated Work Surface Enhances High Magnification Viewing



Can't find what you're looking for?
Tell us what you need and we'll build it!



SUBMIT A QUICKQUOTE REQUEST


Need Help?

(714) 578-6100

EMAIL CHAT

Mon - Fri, 5:30am - 5:30pm PST

Hide
You need at least 2 products to compare Compare Clear All
Compare Products