FREE CONSULTATION714-578-6100
  1. Home
  2. Glove Boxes
  3. HEPA or ULPA Filtration
  4. LFGI Laminar Flow Glovebox/Isolator

LFGI Laminar Flow Glovebox/Isolator
by Germfree

LFGI Laminar Flow Glovebox
Ultimate product and operator protection--all units are CACI and CAI
The LFGI Laminar Flow Glovebox/Isolator is designed with positive and negative configuration options. Units meet NIOSH recommendations as a Compounding Aseptic Containment Isolator (CACI) and USP 797 regulations as a Compounding Aseptic Isolator (CAI). The ergonomic glove system and the HEPA filters provide users the highest level of protection from microbiological particulates, dust, powders and aerosols.
  • Units configured to Positive or Negative Pressure Operation; can be adjusted by a certifier when unit is in place
  • Antechamber and waste and sharps removal tubes can be installed (on either side of unit) for right or left-handed operators
  • Three available exhaust options can be factory-set or changed by a certifier when the unit is in-place
  • Protects operator and product in the event of a breach of containment with Inward/Outward Face Velocity of 95-100 linear feet per minute at gloveport opening
  • 10" range variance of hydraulic-assist, height-adjusting stands allow operators to sit or stand comfortably for extended time periods
  • Prevents operator strain with easy to access stainless steel sliding tray inside the airlock
  • Full framed, standard-size Minipleat HEPA Filters provide 100% filtering of inlet and exhaust air from both the work area and the antechamber for a fully contained environment
  • 4" diameter Trash tube (flanged for waste bag/container connection) and straight 2 1/2" diameter Sharps tube (for quick and easy drop of large syringes) include easy to remove seal/stopper to maintain work area containment
  • Meets or exceeds ISO 5 air quality
  • 2-Year Manufacturer Warranty for Parts and Labor from original purchase date
cleanliness high
Ordering Information
Germfree Part# Overall Dimensions (W x D x H)
Inches (mm)
Work Area Dimensions (W x D x H)
Inches (mm)
Cat # Price
LFGI-3USP 54 x 32 x 80 in. (1372 x 813 x 2032 mm)
(39"—991 mm wide at base)
34.5 x 24.5 x 29 in.
(876.5 x 622.5 x 737 mm)
5607-15 Price
LFGI-4USP 66 x 32 x 80 in. (1676.5 x 813 x 2032 mm)
(50"—1270 mm wide at base)
46.5 x 24.5 x 29 in.
(1181.1 x 622.5 x 737 mm)
5607-16 Price
LFGI-6USP 90 x 32 x 80 in. (2286 x 813 x 2032 mm)
(74"—1880 mm wide at base)
70.5 x 24.5; x 29 in.
(1791 x 622.5 x 737 mm)
5607-17 Price

See Accessories


Specifications
Electrical 115 Volt, 15 amp, 60 Hz (220/50-60 Hz also available)
Amperage Rating 15
Running Amperage 6 (LFGI-3 and 4USP) = 7 (LFGI-6USP)
Antechamber Dimensions Sealed two-door airlock 16 W x 13.5 D x 14.25 H in. (406.5 x 343 x 368.5 mm)
Configuration Options Positive and Negative Pressure Operation
Lighting T8 fluorescent externally mounted for optimum lighting and minimal heat build-up; ON/OFF lighted indicator switches for blower and lighting

Additional Features
  • Full coverage and front-loading of HEPA filters for easy replacement by certifier
  • Pre-filter can be replaced without tools and extends life of work area supply HEPA filter; high capacity motor/blower with speed control extends life of HEPA filters
  • Fully adjustable Sharps Container Shelf accepts many commercially available wide-mouth or hinged-top sharps collectors
  • Sealed two-door airlock antechamber keeps complete environmental separation between ambient conditions and work area
  • HEPA-Filtered Purge System eliminates cross contamination between unit work area and room—critical for material ingress and egress
  • Safety features: lock-out handle with key, low pressure alarm and digital pressure readout, glove change without breaking containment, standard locking casters
  • Accessories sold separately
  • Ergonomic features: two part sleeve/glove system fits various commercially available glove types and sizes; extra-large oval gloveports provides range of movement and accommodates many body types; 3" arm rest of gloveports promotes comfort and reduces fatigue; large viewing panel minimizes glare and strain; integrated footrest
  • Construction allows optional outside venting of exhaust air
  • Clean air plenum external to work area; sealed outlet in work area; includes 10 ft. hospital grade power cord with molded grounded plug

Configuration Options
Compounding Aseptic Isolator (CAI) Compounding Aseptic Containment Isolator (CACI)
Positive Airflow Negative Airflow
positive airflow negative airflow
Product Protection Personnel Protection

Accessories: Call a Terra Product Expert about the GRx Series
glove system   GRx Rapid Exchange Glove System
GRx Rapid Exchange Glove System
with full case #GRX-ADC
  GRx Rapid Exchange Glove System #GRX-NS

 
acrylickbase   stopcock
GRx Rapid Exchange Glove System
Clear Acrylic Basic Case #GRX-AEC
  Stopcock for Air, Gas or Vacuum #BBF-A1

 
outlet   sleeves
Duplex Electrical Outlet Installed
in Work Area Center #BBF-A2
  Additional Pair Smooth Sleeves #LFGI-A33B

 
2-door airlock   sharps discharge tube

Additional 2-Door Airlock with timed HEPA Purge and sliding tray

  Additional Sharps and Waste Discharge Tubes

 
sharpes discharge tubes   data port

Sharps and Waste Discharge Tubes

  Sealed Data Port
Individual adjustable diameters between 0.16"- 01/27" allows passage of 4 cables LFGI-A51D

 
window for airlock   Operator Training DVD
Window for Airlock   Operator Training DVD

Relatedd Products:

Click to leave a message. 24-hour sales and tech phone support, M - F
Go to...
Go To
Laboratory-Equipment.com