FREE CONSULTATION714-578-6100
  1. Home
  2. Glove Boxes
  3. Controlled Atmosphere Glove Boxes
  4. Labconco Protector Controlled Atmosphere Glove Box

Protector Controlled Atmosphere
Glove Boxes
by Labconco

Labconco
The Labconco  Protector
Controlled Atmosphere Glove Box
  • Protector Controlled Atmosphere Glove Boxes maintain an inert atmosphere, and isolates air-sensitive materials to guard against oxygen and moisture contamination
  • Factory leak-tested with a mass spectrometer while pressurized with Helium at 5 inches of water gauge
  • Exceeds Class 1 atmosphere containment conditions for oxygen permeation
  • Contains space-saving inner and outer transfer chamber doors that pivot upward
  • Large viewing area, 36" W x 27.6" H (914 mm x 701 mm) for maximum viewing capabilities
  • Four manual valves with 3/8"(10 mm) compression fittings (2 on main chamber, 2 on transfer chamber)-for evacuating, filling and increased control
  • Factory-installed, rear-mounted, low profile stainless steel pressure relief bubbler at ±6 inches of water gauge
  • Two rear-mounted inlet and outlet fittings for easy connection to optional AtmosPure Re-Gen Gas Purifier or other accessory
  • Offered in one-piece molded fiberglass or stainless steel lined models with single or double operator capabilities
Ordering Information
Protector Controlled Atmosphere Glove Boxes — Fiberglass
Type Power Supply Without Auto Pressure Control With Auto Pressure Control
Labconco # Cat. # Price Labconco # Cat. # Price
Single Models
(2 glove ports)
120 VAC, 60 Hz 5060010 3644-05 Price 5080010 3644-06 Price
220VAC, 50/60Hz 5060031
5060035
5060040
5060045
3644-05-220 Price 5080031
5080035
5080040
5080045
3644-06-220 Price
Twin Models
(4 glove ports)
120 VAC, 60 Hz
220VAC, 50/60Hz
Protector Controlled Atmosphere Glove Boxes — Stainless Steel
Type Power Supply Without Auto Pressure Control With Auto Pressure Control
Labconco # Cat. # Price Labconco # Cat. # Price
Single Models
(2 glove ports)
120 VAC, 60 Hz 5060110 3644-07 Price 5080110 3644-08 Price
220VAC, 50/60Hz 5060131
5060135
5060140
5060145
3644-07-220 Price 5080131
5080135
5080140
5080145
3644-08-220 Price
Twin Models
(4 glove ports)
120 VAC, 60 Hz 5060112 3644-09 Price 5080112 3644-10 Price
220VAC, 50/60Hz 5060133
5060137
5060142
5060147
3644-09-220 Price 5080133
5080137
5080142
5080147
3644-10-220 Price
Labconco
Various contamination-sensitive materials can be handled within The LabconcoProtector Controlled Atmosphere Glove Box
Protector Controlled Atmosphere Glove Boxes provide a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment.

Each model is precisely constructed out of two types of material

The fiberglass-lined models feature a one-piece molded fiberglass liner with clear acrylic inner and outer transfer chamber doors. This model has been performance tested to maintain oxygen levels as low as 0.4 ppm and moisture levels as low as 2 ppm. The oxygen permeation is less than 0.3 ppm/min per ISO 10648-2 and illumination exceeds 120 footcandles.

The stainless steel-lined models feature a Type 304 stainless steel liner with Type 304 stainless steel inner and outer transfer chamber doors. Type 304 stainless steel material also comprises the front panel. This model has been performance tested to maintain oxygen levels as low as 0.2 ppm and moisture levels as low as 1 ppm. The oxygen permeation is less than 0.16 ppm/min per ISO 10648-2 and illumination exceeds 80 footcandles.

Auto Pressure Controller Modules

Included with the Protector Controlled Atmosphere Glove Boxes is the Auto Pressure control feature. This provides automatic control of the main chamber pressure (-5 to +5 inches of water gauge), main chamber evacuation and filling cycles (up to 499 cycles), and transfer chamber evacuation and filling cycles (up to 199 cycles). The main chamber vacuum/pressure is regulated, as well as, the transfer chamber pressure. The transfer chamber pressure is to remain between 0 and -29.5 inches of Mercury. This module has a mutable, audible alarm that sounds when pressure/vacuum levels are outside the set limits. Additionally, there is an LCD display to indicate the pressure (in inches of water, inches of mercury, and mBar) of the main chamber and transfer chamber. A three-position foot pedal is used to increase gas/fill, evacuate/decrease gas levels, and turn off gas in the glove box. There is also an input/output port for optional AtmosPure Re-Gen as Purifier.

AtmosPure Re-Gen as Purifier

This gas purifier maintains ultrapure inert atmosphere within the Protector Controlled Atmosphere Glove Boxes. It has the capacity to remove 5 liters of oxygen gas (13,500 ppm) and 660 grams of moisture (water vapor) which is equivalent to 18 million ppm. The regeneration is, in turn, completed in 13 hours. Additionally, the leak rate is ≤ 0.000001 mL/sec.

Protector Controlled Atmosphere Glove Boxes also feature:

Interior left-hand side wall-mounted pass-through plug for on-site installation of an optional accessory such as electrical outlet, RS-232 port, gas/liquid port, or port for oxygen or moisture monitor. The glove box also comes with a pair of neoprene gloves, two 8" (203 mm) ID epoxy-coated aluminum, double grooved glove ports, and two 25-watt fluorescent lights.
Specifications

 

Domestic or International
Specifications
Protector Fiberglass Controlled Atmosphere Glove Box Protector Fiberglass Controlled Atmosphere Glove Box with Auto Pressure Control Protector Stainless Steel Controlled Atmosphere Glove Box Protector Stainless Steel Controlled Atmosphere Glove Box with Auto Pressure Control Protector Stainless Steel Double Controlled Atmosphere Glove Boxes Protector Stainless Steel Double Controlled Atmosphere Glove Boxes with Auto Pressure Control
Item Dimensions Domestic: 63.9"W x 34.4"D x 45.7"H
(1623 x 874 x 1161 mm)
63.9"W x 34.4"D x 45.7"H
(1623 x 874 x 1161 mm)
63.5"W x 34.4"D x 45.7"H
(1613 x 874 x 1161 mm)
63.5"W x 34.4"D x 45.7"H
(1613 x 874 x 1161 mm)
108.9"W x 34.4"D x 45.7"H
(2766 x 874 x 1161 mm)
108.9"W x 34.4"D x 45.7"H
(2766 x 874 x 1161 mm)
International: 63.9"W x 34.4"D x 45.7"H
(1623 x 874 x 1161 mm)
63.9"W x 34.4"D x 45.7"H
(1623 x 874 x 1161 mm)
63.5"W x 34.4"D x 45.7"H
(1613 x 874 x 1161 mm)
63.5"W x 34.4"D x 45.7"H
(1613 x 874 x 1161 mm)
108.9"W x 34.4"D x 45.7"H
(2766 x 874 x 1161 mm)
108.9"W x 34.4"D x 45.7"H
(2766 x 874 x 1161 mm)
Electrical Specifications Domestic: 100-115V; 50/60Hz, 10 Amps 100-115V; 50/60Hz, 10 Amps 100-115V; 50/60Hz, 10 Amps 100-115V; 50/60Hz, 10 Amps 100-115V; 50/60Hz, 10 Amps 100-115V; 50/60Hz, 10 Amps
International: 208-230V; 50/60Hz, 10 Amps 208-230V; 50/60Hz, 10 Amps 208-230V; 50/60Hz, 10 Amps 208-230V; 50/60Hz, 10 Amps 208-230V; 50/60Hz, 10 Amps 208-230V; 50/60Hz, 10 Amps
Filter Type Domestic: NONE NONE NONE NONE NONE NONE
International: NONE NONE NONE NONE NONE NONE
Number of Glove Ports Domestic: 2 2 2 2 4 4
International: 2 2 2 2 4 4
Primary Applications Domestic: Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials
International: Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials Working with Atmosphere-Sensitive Materials
Liner Material Domestic: Fiberglass Fiberglass Steel Steel Steel Steel
International: Fiberglass Fiberglass Steel Steel Steel Steel
Interior WorkingWidth Domestic: 35.0"
(889 mm)
35.0"
(889 mm)
35.0"
(889 mm)
35.0"
(889 mm)
81.84"
(2079 mm)
81.84"
(2079 mm)
International: 35.0"
(889 mm)
35.0"
(889 mm)
35.0"
(889 mm)
35.0"
(889 mm)
81.84"
(2079 mm)
81.84"
(2079 mm)
Required Accessories Domestic: Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas
International: Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas Supporting Base, Vacuum Source, Inert Gas
Built-In Options Domestic None Pressure Control & Foot Pedal None Pressure Control & Foot Pedal None Pressure Control & Foot Pedal
International Pressure Control & Foot Pedal Pressure Control & Foot Pedal None Pressure Control & Foot Pedal None Pressure Control & Foot Pedal
Compliance

 

Domestic: ETL Listing, UL 61010-1 and CAN/CSA C22.2 No.1010.1 conformity ETL Listing, UL 61010-1 and CAN/CSA C22.2 No.1010.1 conformity ETL Listing, UL 61010-1 and CAN/CSA C22.2 No.1010.1 conformity ETL Listing, UL 61010-1 and CAN/CSA C22.2 No.1010.1 conformity ETL Listing, UL 61010-1 and CAN/CSA C22.2 No.1010.1 conformity ETL Listing, UL 61010-1 and CAN/CSA C22.2 No.1010.1 conformity
International: CE Conformity Marking CE Conformity Marking CE Conformity Marking CE Conformity Marking CE Conformity Marking CE Conformity Marking

Required Accessories
Adjustable Height Mobile Base Stand
Adjustable Height Mobile Base Stand with 5" (127 mm) casters has durable 2" (51 mm) tubular glacier white epoxy-coated steel frame with permanently-mounted black laminate hard board work surface. Includes lower shelf, 47" W x 18" D (1194 mm x 457 mm), to accommodate accessory equipment such as a pump. Telescoping legs adjust in 1" (25 mm) increments to seven overall height positions from 33" to 40" (838 mm to 1016 mm).
Overall dimensions: 60" W x 31" D (1524 mm x 787 mm).
Quick Ship Item Items with prices in blue usually ship within 3 – 5 days of order.
Labconco # Cat. # Price
5235500 3643-22 Price
  Adjustable Height Stationary Base Stand
Adjustable Height Stationary Base Stand with leveling feet has durable 2" (51 mm) tubular glacier white epoxy-coated steel frame with permanently-mounted black laminate hard board work surface. Includes lower shelf, 47" w x 18" d (1194 mm x 457 mm), to accommodate accessory equipment such as a pump. Telescoping legs adjust in 1" (25 mm) increments to seven overall height positions from 33" to 40" (838 mm x 1016 mm).
Overall dimensions: 60" W x 31" D (1524 mm x 787 mm).
Labconco # Cat. # Price
5235501 3643-23 Price
     
Double Glove Box Mobile Base Stand
Double Glove Box Mobile Base Stand has epoxy-coated welded steel base with black phenolic laminate work surface. Height is adjustable, and lower shelf provides extra space.
Labconco # Cat. # Price
5062020 3643-24 Price
  Inert Gas for Filling
A gas source is necessary to operate the glove box. Follow the link for more details on Terra Universal's Nitrogen Generator.
     

Vacuum Source:
Labconco offers Rotary Vane Direct Drive Vacuum Pumps to provide a reliable vacuum source. These pumps are available with displacement capacities of 117 or 195 liters per minute (at 60 Hz).

Terra Universal Offers several vacuum chambers and controllers to meet your vacuum source needs.

  Labconco # Cat. # Price
Direct Drive Rotary Vane Vacuum Pumps-115 V
(Includes 115V NEMA 5-15P Plug)
147210 3643-79 $ 3,233
Direct Drive Rotary Vane Vacuum Pumps-230 V
(Includes 230V NEMA 6-15P Plug)
7739400 3643-80 Price
Direct Drive Rotary Vane Vacuum Pumps-230 V
(Includes 230V reverse IEC Plug)
7739402 3643-81 Price
     
Nitrogen Generator
Dimensions
W" x D" x H"
(mm)
Uncrated Weight
lbs. (kg)
Flow Range*  
Cat. # Price
18 x 18 x 81.25
(457 x 457 x 2064)
(including 1.25", 32 mm) for leveling feet)
157
(71)
0-400 SCFH 2700-09B $ 12,942
24 x 12 x 49.25
(610 x 305 x 1251)
(including 1.25", 32 mm, for leveling feet)
96
(43.5)
0-100 SCFH 2700-11B $ 6,484
20 x 12 x 35.5
(508 x 305 x 902)
(including 1.25", 32 mm, for leveling feet)
58
(26.3)
0-10 SCFH 2700-12B $ 4,983
* For 99% N2 purity. With 100psi inlet pressure
Replacement Filter Elements
1 µm Filter 2700-15 Price
0.025 µm Coalescing Filter 2700-16 Price

Corresponding Options
AtmosPure Re-Gen Gas Purifier
AtmosPure Re-Gen gas purifier maintains ultrapure inert atm. in controlled atmosphere glove boxes. Capacity to remove 5 L of O2 (13,500 ppm) and 660 g H2O (18 M ppm). Regen. completed in 13 hrs. Leaks ≤1 x 10-6 ml/sec. 5 lb copper catalyst/5 lb molecular sieve. 115V/50/60Hz and 230V/50/60Hz
  Labconco # Cat. # Price
AtmosPure Re-Gen Gas Purifier 115 V 5121810 3644-18 Price
AtmosPure Re-Gen Gas Purifier (International) 5121831
5121835
5121840
5121845
3644-18-220 Price
  AtmosPure Roughing Prefilter Kit
to filter the glove box's inlet and outlet as the inert gas is purified. Two roughing prefilters, clamp plates for mounting inside Protector Controlled Atmosphere Glove Boxes.
Labconco # Cat. # Price
5441500 3644-20 Price
     
AtmosPure P100 Particulate Filter Kit
to filter the glove box's inlet and outlet as the inert gas is purified. Two P100 particulate filters, mount housings.
Labconco # Cat. # Price
5441600 3644-21 Price
  AtmosPure Regeneration Tubing Kit
to make the regeneration plumbing connections to the 4% hydrogen/inert gas mixture, vacuum and vent. Includes flexible tubing and fittings.
Labconco # Cat. # Price
5441700 3644-22 Price
     
AtmosPure Flex Tubing Kit
includes the plumbing to make the connection from the AtmosPure to the glove box. 3/4" (19 mm) ID neoprene-lined flexible tubing. For use with all Protector and Precise glove boxes, single width and double width
  Labconco # Cat. # Price
Single 5441800 3644-23 Price
Double 5441801 3644-24 Price
  AtmosPure Hard Tubing Kit
includes the plumbing to make the connection from the AtmosPure to the glove box. Stainless steel tubing. For use with all Protector and Precise glove boxes, single width.
  Labconco # Cat. # Price
Single 5441802 3644-25 Price
Double 5441803 3644-26 Price
     
AtmosPure Elbow Adapter Kit
AtmosPure 3/4" to 3/8" (19 mm to 10 mm) Adapter Kit. Fittings permit 3/4" (19 mm) ID neoprene hose (not included) to attach to Precise Glove Box's 3/8" (10 mm) inlet/outlet. Two elbows.
Labconco # Cat. # Price
5441900 3644-27 Price
  Exterior Monitor Tubing Kit
provides attachment tubing to allow placement of Moisture Monitor 5244900 or 5244901 outside the glove box.
Labconco # Cat. # Price
5442400 3644-31 Price
5442500 3644-32 Price
     
AtmosPure 6-Pin Communication Cable
is required for use when the AtmosPure and glove box configured with Auto Pressure Controller are sharing one vacuum pump.
Labconco # Cat. # Price
5442000 3644-28 Price
  AtmosPure 9-Pin Oxygen/Moisture Cable
is required for use when the AtmosPure is used in AUTO mode. Allows for automatic control of the AtmosPure blower from an accessory Oxygen or Mositure Monitor (not included).
Labconco # Cat. # Price
5442100 3644-29 Price
     
HEPA Filter Vacuum
HEPA filtered vacuum trap for filtering particulates before entry in to vacuum pump. One HEPA filter, and filter housing for connection with vacuum tubing between glove box and vacuum pump.
Labconco # Cat. # Price
5441400 3644-19 Price
  Glove Box Moisture Monitor
Moisture monitor measures dew point range from -80 to 0°C or 0 to 6000 ppm. Displays dew point only. Includes meter, probe and calibration stand. For placement inside the glove box's main chamber. .
  Labconco # Cat. # Price
  5442200 3644-30 Price
UK 230V/50/60Hz 5442201 3644-30-220 Price
24-hour sales and tech phone support, M - F
Go to...
Go To
Laboratory-Equipment.com