Model shown: Single Chamber (Cat. No. 1694-13) with Dual Purge System.
Dual Purge Nitrogen Purge Controller (additional controls available for automated RH, dew point, or oxygen level control)
2-port chamber No. 1694-13B includes fluorescent light (4-port models available)
10" (254 mm)-diameter plastic glove ports (shown with optional two-piece glove and sleeve combination)
Powder-coated steel stand with leveling feet
Options include air locks, ionizing module, port caps, stainless steel ports, trace oxygen controller and nitrogen generator
Provides all the features and capabilities of Terra's Series 300 models in a more spacious chamber
Optional gas purge controls automatically establish a clean environment and maintain a humidity set point down to 3% RH
Select single model (with two glove ports) or twin model (with four glove ports)
How to Order:
Select either a single model (2 glove ports) or twin model (4 glove ports) from the table below. Note: Chambers include access door(s) only when ordered together with air lock or oven.
Select system options from the options chart. Be sure to specify the side on which you would like any system modules mounted (right or left when facing the front of the chamber). All prices include installation and any necessary access door(s).
To order choose the glove box and system options below
OR — Use the QuickQuote tool to help you select the glovebox for your application
* Doors are included with selection of air lock below.
All models include a 120VAC/60Hz fluorescent illuminator. For 220VAC/50Hz power, add "-220" to the catalog number.
For electropolishing of any stainless steel component, add "-2" to the catalog number and 30% to the price.
Nitrogen Generators give you a reliable point-of-use supply of up to 99%-pure nitrogen. Eliminate the drawbacks of canisters and 3rd-party suppliers! You control volume, purity and rate; all you need is a clean compressed-air feed. Terra's three sizes of maintenance-free membrane generators meet several capacity requirements are are ideal for back-filling or continuous flow into desiccators, glove boxes, vacuum chambers and incubators.
Positive Pressure Isolation vs. Biohazard Containment Terra glove boxes are designed as positive-pressure isolation chambers that operate with a continuous inflow of process gas and include bleed valves to relieve overpressures. Unless specified, they are not designed as low-leak or air-tight containment chambers, nor should they be used with hazardous substances that require air-tight seals. In containment applications, a glove box should typically be operated under continuous negative pressure, via a ventilated duct, so that any small leaks do not contaminate the operator or the environment.
Now with all-304/316
stainless steel latches
to elminate scratching, corrosion and contamination common with plated hardware.
These glove box isolators are a larger version of the Series 300 chambers listed on the preceding pages.
Select single models (with two glove ports) or twin models (with four glove ports) to meet your applications. Dual inlet and outlet ports allow connection of Terra's complete line of gas control systems, including the Dual Purge™ System, which provides variable purging to flush out moisture and contaminants; and either the NitroWatch® or DewWatch™, which work in tandem with the Dual Purge to control humidity levels down to 0.5 ppm(v).
12" x 12" (305 mm x 305 mm) gasketed doors supplied with air locks (see ordering information below); doors open inward.
10" (254 mm) round with flange for connecting glove assembly
Tapped .75" NPT inlet (for connecting flowmeter or Dual Purge™ System) and .75 " NPT system pressure port; .75" NPT outlet (for connecting Terra Automatic RB® Valve). Appropriate adapter inserts are supplied for any Terra gas systems ordered.
A. Glove Port
B. Port Cover
C. Iris Adapter
10" (254mm)-diameter port is standard on all Terra gloveboxes. Order covers and iris adapter separately. Complete Information
Changeable Sleeve and Glove Combination
These accordion sleeves can be used with a variety of gloves, allowing you to change glove size or type without changing the sleeve itself. The convoluted section keeps the sleeve off the operator's arm for better air circulation and greater comfort. Supplied with one pair of nitrile industrial gloves (select desired size). Clamps included.
Stands for Series 400 Glove Boxes
Constructed of all-welded 1.5" (38 mm) square tubing, these stands are specially designed to support Series 400 glove boxes. Select epoxy finished (white) steel or stainless steel stands, with or without rubber casters. Select oven support for use with Terra's High-Performance Pass-Through Oven (No. 5401-00A). All stands raise chambers 30" (762 mm) off of floor, add 3" (76 mm) for casters.
Provides a convenient record of storage conditions! Placed in a desiccator or glovebox, this compact device accumulates humidity and temperature data at specified intervals for hours, days, weeks, even months. USB connection lets you import and display data in several formats.