Product 2900-57B-220
$12,992
Usually ships in 35-43 business days

Want it faster ? Read about FasTrak

Designed in the USA

• Stainless Steel LiftLatches don't strain hinges and eliminates corrosion with plated hardware

• Perforated rear baffle plates separate the exit filters from the compounding zone without disrupting laminar flow

• Includes externally mounted fluorescent illuminator in main chamber

• Glove Ports: 10" (254 mm) diameter ports that provide a wide range of motion (order desired gloves separately)

• IV Rod: 0.25" (6 mm) stainless steel rod mounted 9" (228 mm) from filter face

• Pressure Gauge: Two 0 - 0.25" Magnehelic(R) gauges monitors internal positive pressure in antechamber and main chamber

• Filter/Fan Unit: 24"W x 48"D (610 x 1219 mm) low-vibration impeller blower with direct-drive, continuous-duty two-speed fan and 99.99% efficient HEPA filter

• Air Speed: 100 (low speed); 120 (medium speed); 140 (high speed)

• Prefilter/Exit filter: Fiberglass/Polyester

• Complies with USP 797 Compounding Aseptic Isolator (CAI) requirements

• NOT SUITABLE for use with bio-hazardous powders and other materials. Call Terra for information on Compounding Aseptic Containment Isolators (CACI), which provide safe containment and ventilation of cytotoxins

Filter: HEPA

Number of Glove Ports: 2

Window Material: Polycarbonate

Maximum Working Height: 38.5"

Marks & Listings: USP 797

Electrical Specifications: 240 V, 2 A, 500 W, 50/60 Hz

Dimensions, Product: 49.5" W x 30" D x 54" H

Dimensions, Shipping: 55.5" W x 62" D x 36" H

Weight, Product: 290 lb

Weight, Shipping: 489 lb

Package Type: Crate

Unit of Measure: EA

Low Particle Isolators

  • Stainless Steel USP 797 BioSafe Compounding Aseptic Isolators USP 797 BioSafe® Compounding Aseptic Isolator, Stainless Steel
Stainless Steel USP 797 BioSafe Compounding Aseptic Isolators

Features and Benefits

GBX-382

Tilt-Up Access Door

Ergonomic LiftLatches and gas struts simply daily cleaning of the main compounding chamber and transfer of bulky equipment. A one-piece, thermoplastic gasket seals when the panel is closed and latched.

HEPA-Filtered Antechamber

The antechamber provides an intermediary HEPA-filtered space that prevents cross-contamination of the compounding chamber. A sliding glass door provides separation and maintains a pressure gradient.

IV Bag Rod

The main compounding chamber includes a stainless steel IV rod for suspending IV bags at a convenient height during compounding (hooks not included).

Sliding Transfer Door

A 0.5”-thick tempered glass door glides in a polypropylene track between the antechamber and main chamber, maintaining separation and the USP-prescribed pressure gradient when closed.

Heavy-Duty Quick-Release Door Hinges

The tilt-up front panel pivots on stainless steel hinges that allow the entire panel to be easily detached for maintenance or cleaning; simply disconnect the lift-assist gas struts and slide the door off.

Certification Test Ports

Two ports (normally plugged) allow independent verification of the chamber pressures monitored by the Magnehelic gauges, simplifying certification (the “Ambient” reference port always remains open).

Popular Accessories

For a full list of accessories, select a product then click Choose Accessories on that product page.
  • Glove Box Cord Feed-Through
    A self-sealing port can be mounted in the lower-rear corner of the glove box chamber for passing cables or tubing into the isolator. Feed-throughs are also available for gas, vacuum and other electrical connectors.
  • Sleeve and Glove Assemblies
    Sleeve/glove combinations, available in many materials, allow fast, inexpensive glove replacement without removing sleeves from the glove box port (shown: Hypalon with glove/sleeve connectors).
  • "Sharps" Waste Port
    The side or floor mounted waste port offers easy disposal of sharps or other waste. The 6"-diameter port is flush with the interior of the main chamber and has a 3” flange below the surface for connecting waste containers (includes cover).
  • Powder-Coated Steel Stands
    Stands are all-welded 2"-square steel tubing with white powder-coated finish and chemical-resistant nylon leveling feet. Raise chamber 30" above floor level. Select optional casters for easy positioning.

On a tight schedule? Choose FasTrak 24/7 Priority Service to help meet your critical schedule for Terra-manufactured products, either before or after your order is placed.*

  • FasTrak 24/7 provides a 24/7 commitment to meet the shipping date YOU specify, regardless of quoted lead times.
  • FasTrak 24/7 assigns a dedicated production team plus a dedicated senior expeditor working three shifts to meet your delivery specification.
  • FasTrak 24/7 guarantees* to meet the agreed-to specified ship date.

Call for pricing. FasTrak service fees cover costs of additional services only, without additional profit.

 * Terra's FasTrak services limited guarantee: to ship on the ESD or date specified OR to refund up to 100% of FasTrak charges. This guarantee covers no direct, special, consequential or other damages and is strictly limited to up to 100% of the amount paid for FasTrak service. When a specified ship date is missed due to factors outside Terra's control (vendor performance, deliveries by shipping companies, etc.) and random factors such as accidents, the credit of up to 100% of the FasTrak 24/7 may not apply. FasTrak service requested after order placement will be quoted and accepted based on available time remaining before required ship date.

Hide
You need at least 2 products to compare Compare Clear All
Compare Products