• Benchtop laminar flow hood provides HEPA filtered Class 100 (ISO 5) mini cleanroom environment
• Bio-tech HEPA enclosure suitable for optics, microelectronics, genomics, proteomics, cell biology
• Turnkey system includes frame, adjustable speed blower, HEPA filter, LED lighting, status indicator
• 3-speed switch for low/medium/high settings with average airflow velocity of 90+ ft/min at 640+ CFM
• Convert any appropriate bench or workstation into a mini cleanroom environment with a BioSafe® benchtop laminar flow hood.
• Ideal for science applications such as microelectronics, optics, cell culture, medical devices, non-hazardous sterile pharmaceutical compounding, micropropagation, genomics, proteomics, cell biology, and mushroom cultivation.
• UL-listed Fan Filter Units (FFU's) are manufactured to the highest standards to reduce the risk of damage, injuries, and electrical hazards.
• See performance data and submittal sheets for additional information on fan filter unit.
• Includes High Efficiency Particulate Air (HEPA) Filter: 99.99% efficient at 0.3µm particle diameter. Optional Ultra-Low Particulate Air (ULPA) Filter: 99.999% efficient at 0.12µm particle diameter.
• Meets or exceeds ISO 5/Class 100 for cGMP, IEST, ASTM and ISO 14644-1 standards. Select optional ULPA filter for ISO 4/Class 10.
• Vertical flow configuration fits a smaller footprint, encompassing less work space. It can also be easier to configure for tall equipment or processes requiring more vertical space.
• Operation status indicator (OSI) light glows continuously when filtration unit is plugged in and turned on to confirm unit is operational. The OSI blinks when the unit is plugged in but switched off.
• BioSafe® benchtop clean air hoods are designed free of cracks or crevices for easy cleaning and mitigation of cracks and crevices which harbor microbes.
• Cleanroom-grade HEPA filter blower provides positive pressure laminar airflow and sweeps away particulate contamination from the work surface.
• 304 stainless steel frame supports easy disinfection, wipedown, and sterilization for medical device or biotechnology use.
• Recessed LED lighting and a hinged access shield allow for high visibility and easy sample introduction.
• Low-noise WhisperFlow® FFU reduces background noise, registers under 50 dBA at 12" (305 mm) from filter face for easy communication and minimal disruption.
• Static-dissipative PVC (SD-PVC) side panels for static-sensitive environments and increased chemical resistance against cleaning agents.
• Includes: Hood frame, fan filter unit, LED lighting.
• Optional Accessories:
• ULPA filter removes 99.999% of particles measured at 0.12µm or larger.
• Filter replacement alarm prevents costly operational interruptions and avoids damage to fan blower caused by excessive backpressure from long overdue filter replacement or other abnormalities.
• UV germicidal lamp to inhibit microbial growth in and around hood.
• Ionizing bar for ESD-sensitive applications.
• Turnkey fan filter unit system with built-in LED light and ionizers.
• Removable rear plenum for exhaust or recirculation.
• Two-piece vibration-isolated stand and work surface ideal for microscopes or other vibration-sensitive equipment.
• ErgoHeight automatic height adjusting table, perfect for workstations holding heavy or fragile equipment that require frequent height adjustment.
• NOTE: Laminar flow hoods are not appropriate in the presence of biohazards. Only an approved containment system, such as a Class II, Type A2 biosafety cabinet, should be used in applications requiring Biosafety Level (BSL) 2 or 3 containment.
•