FREE CONSULTATION714-578-6100
  1. Home
  2. Laminar Flow Hoods, Fume Hoods, Biosafety Cabinets
  3. Laboratory Fume Hoods
  4. Labconco Protector Premier Fume Hood

Protector Premier Laboratory Fume Hoods
by Labconco

Protector Premiere Laboratory Hoods

The only high performance hood on the market with a built-in blower. Remote blower models also available.
4 nominal widths to choose from

UL logo All Models CE 208-230V Models
cleanliness high
  • By-pass airflow, energy efficient benchtop design, available in 4', 5', 6', and 8' nominal widths, effectively contains toxic, noxious and other harmful materials
  • Sleek interior made with an easy to clean seamless one-piece fiberglass liner that is corrosion and chemical resistant
  • Eco-Foil™ Air Foil compared to flat air foils saves energy by 7 – 10% with aerodynamic curve of air sweeping through work surface for maximum containment; Clean-Sweep™ airflow openings* promote non-turbulent air streams
  • Pre-set baffle(s) with flame spread less than 25 per ASTM E-84.
  • 37.5" (95.3 cm) high sightline from the work surface and header panel for taller users
  • Removable front and side panels, and front service access panels for plumbing and electrical wiring
  • Conformance: ANSI Z9.5-2011, ASHRAE 110-1995, ASTM E84-09C, CAN/CSA C22.2-No. 61010.1, CFR 29, Part 1910, CE (208-230V models), NFPA 45-2011, SEFA 1-2010, SEFA 8 2010 (Cabinet Surface Finish Tests) UL 1805, UL 61010-1
  • One-Year Manufacturer Warranty from date of installation OR
  • Two-Year Manufacturer Warranty from date of shipment

Energy efficient Protector Premier Laboratory Hoods meet SEFA-1 regulations and operate at a face velocity as low as 60 fpm. The by-pass airflow design effectively contains toxic, noxious and other harmful fumes. These laboratory fume hoods are ideal for general chemistry applications and the models fit standard laboratory casework or accessories.

Contact a Terra product expert today to help you choose which Protector Premier Laboratory hood model best suits your application.


4' Protector Premier Laboratory Hoods
4' Protector Premiere Laboratory Hood  
Dimensions
Nominal width 4'
Remote Blower Required 48.0" w x 31.7" d x 59.0" h
(1219.5 x 805.5 x 1499 mm)
With Built-in blower 48.0" w x 31.7" d x 66.0" h
(1219.5 x 805.5x 1676.5 mm)
Weight:
Remote Blower Required 325 lbs. (147 kg)
With Built-in Blower 365 lbs. (166 kg)

Select models feature: built-in exhaust blower, explosion proof, 1 electrical duplex, and/or service features

Explosion proof models are ideal for laboratories dealing with potentially explosive and/or flammable atmospheres (Class 1, Div 1 or II).

Labconco Part # Total Exhaust CFM and
Static Pressure Sash Opening
Electrical Cat. # Price
100% (28") Open 62.5% (18") Open
CFM s.p. CFM s.p.
4' Protector Premier Laboratory Hood--Remote blower required
100400000 725 0.22" 450 0.09" 100-115 volts,
50/60 Hz, 10 amps
3649-00 $ 5,478
100400020 208-230 volts,
50/60 Hz, 5 amps
3649-01 $ 5,478
4' Protector Premier Laboratory Hood with 2 Service Fixtures—Remote blower required
100400021 725 0.22" 450 0.09" 208-230 volts,
50/60 Hz, 5 amps
3649-02 $ 6,053
4' Protector Premier Laboratory Hood with 2 Service Fixtures and 1 electrical duplex
Remote blower required
100400002 725 0.22" 450 0.09" 100-115 volts,
50/60 Hz, 10 amps
3649-04 $ 6,195
4' Protector Premier Laboratory Hood with built-in exhaust blower
100400040 725 0.17" 100-115 volts,
50/60 Hz, 10 amps
3649-05 $ 7,079
100400050 208-230 volts,
50 Hz, 5 amps
3649-06 $ 7,079
100400060 208-230 volts,
60 Hz, 5 amps
3649-07 $ 7,079
4' Protector Premier Laboratory Hood with built-in exhaust blower and 2 service features
100400051 725 0.17" 208-230 volts,
50 Hz, 5 amps
3649-08 $ 7,659
100400061 208-230 volts,
60 Hz, 5 amps
3649-09 $ 7,659
4' Protector Premier Laboratory Hood with built-in exhaust blower and 2 service features, explosion proof
100400071 725 0.17" 100-115 volts,
60 Hz, 10 amps
3649-10 $ 9,161
4' Protector Premier Laboratory Hood with built-in exhaust blower, 2 service features and 1 electrical duplex Includes integral blower
100400042 725 0.17" 100-115 volts,
50/60 Hz, 10 amps
3649-11 $ 7,804
4' Protector Premier Laboratory Hood with built-in exhaust blower, explosion-proof
100400070 725 0.17" 100-115 volts,
60 Hz, 10 amps
3649-12 $ 8,588

See Required Base CabinetsSpillstopper Work SurfacesBlower Selection

5' Protector Premier Laboratory Hoods
5' Protector Premiere Laboratory Hoods  
Dimensions
Nominal width 5'
Remote Blower Required 60.0" w x 31.7" d x 59.0" h
(1524 x 8055 x 1499 mm)
With Built-in blower 60.0" w x 31.7" d x 66.0" h
(1524 x 805.5 x 1676.5 mm)
Weight:
Remote Blower Required 410.0 lbs. (186.0 kg)
With Built-in blower 450 lbs. (204 kg)

Select models feature: built-in exhaust blower, explosion proof, 1 electrical duplex, and/or service features

Explosion proof models are ideal for laboratories dealing with potentially explosive and/or flammable atmospheres (Class 1, Div 1 or II).

Labconco Part # Total Exhaust CFM and
Static Pressure Sash Opening
Electrical Cat. # Price
100% (28") Open 62.5% (18") Open
CFM s.p. CFM s.p.
5' Protector Premier Laboratory Hood—Remote blower required
100500000 955 0.31" 595 0.12" 100-115 volts,
50/60 Hz, 10 amps
3649-13 $ 6,135
100500020 208-230 volts,
50/60 Hz, 5 amps
3649-14 $ 6,135
5' Protector Premier Laboratory Hood with 2 Service Fixtures—Remote blower required
100500021 955 0.31" 595 0.12" 208-230 volts,
50/60 Hz, 5 amps
3649-15 $ 6,911
5' Protector Premier Laboratory Hood with 2 Service Fixtures and 1 electrical duplex
Remote blower required
100500002 955 0.31" 595 0.12" 100-115 volts,
50/60 Hz, 10 amps
3649-16 $ 6,850
5' Protector Premier Laboratory Hood with built-in exhaust blower
100500040 955 0.12" 100-115 volts,
50/60 Hz, 10 amps
3614-53 $ 8,003
100500050 208-230 volts,
50 Hz, 5 amps
3649-17 $ 8,141
100500060 208-230 volts,
60 Hz, 5 amps
3649-18 $ 8,003
5' Protector Premier Laboratory Hood with built-in exhaust blower and 2 service features
100500051 955 0.12" 208-230 volts,
50 Hz, 5 amps
3649-19 $ 8,579
100500061 208-230 volts,
60 Hz, 5 amps
3649-20 $ 8,579
5' Protector Premier Laboratory Hood with built-in exhaust blower and 2 service fixtures, explosion proof
100500071 955 0.12" 100-115 volts,
60 Hz, 10 amps
3649-21 $ 10,085
5' Protector Premier Laboratory Hood with built-in exhaust blower and 2 service fixtures and 1 electrical duplex
100500042 955 0.12" 100-115 volts,
50/60 Hz, 10 amps
3649-22 $ 8,723
5' Protector Premier Laboratory Hood with built-in exhaust blower, explosion proof
100500070 955 0.12" 100-115 volts,
60 Hz, 10 amps
3649-23 $ 9,510
See Required Base CabinetsSpillstopper Work SurfacesBlower Selection
Top of Page
6' Protector Premier Laboratory Hoods
5' Protector Premiere Laboratory Hoods  
Dimensions
Nominal width 6'
Remote Blower Required 72.0" w x 31.7" d x 59.0" h
(1829 x 805.5 x 1499 mm)
With built-in blower 72.0" w x 31.7" d x 66.0" h
(182.9 x 805.5 x 1676.5 mm)
Weight:
Remote Blower Required 485.0 lbs. (220.0 kg)
With Built-in blower 525.0 lbs. (238.0 kg)

Select models feature: built-in exhaust blower, explosion proof, 1 electrical duplex, and/or service features

Explosion proof models are ideal for laboratories dealing with potentially explosive and/or flammable atmospheres (Class 1, Div 1 or II).

Labconco Part # Total Exhaust CFM and
Static Pressure Sash Opening
Electrical Cat. # Price
100% (28") Open 62.5% (18") Open
CFM s.p. CFM s.p.
6' Protector Premier Laboratory Hood--Remote blower required
100600000 1180 0.41" 735 0.16" 100-115 volts,
50/60 Hz, 10 amps
3649-24 $ 6,788
100600020 208-230 volts,
50/60 Hz, 5 amps
3649-25 $ 6,788
6' Protector Premier Laboratory Hood with 2 Service Fixtures—Remote blower required
100600021 1180 0.41" 735 0.16" 208-230 volts,
50/60 Hz, 5 amps
3649-27 $ 7,362
6' Protector Premier Laboratory Hood with 2 Service Fixtures and 1 electrical duplex
Remote blower required
100600002 1180 0.41" 735 0.16" 100-115 volts,
50/60 Hz, 10 amps
3649-26 $ 7,509
6' Protector Premier Laboratory Hood with built-in exhaust blower
100600040 1180 With sash
fully open
0.17" H2O max external s.p.
With sash fully open
100-115 volts,
50/60 Hz, 10 amps
3649-28 $ 8,925
100600050 208-230 volts,
50 Hz, 5 amps
3649-29 $ 8,925
100600060 208-230 volts,
60 Hz, 5 amps
3649-30 $ 8,925
6' Protector Premier Laboratory Hood with built-in exhaust blower and 2 service features
100600051 1180 With sash
fully open
0.17" H2O max external s.p.
With sash fully open
208-230 volts,
50 Hz, 5 amps
3649-31 $ 9,503
100600061 208-230 volts,
60 Hz, 5 amps
3649-32 $ 9,503
6' Protector Premier Laboratory Hood with built-in exhaust blower and 2 service fixtures, explosion proof
100600071 1180 With sash
fully open
0.17" H2O max external s.p.
With Sash fully open
100-115 volts,
60 Hz, 10 amps
3649-33 $ 11,006
6' Protector Premier Laboratory Hood with built-in exhaust blower, 2 service fixtures and 1 electrical duplex
100600042 1180 0.17" H2O max external s.p.
With Sash fully open
100-115 volts,
50/60 Hz, 10 amps
3649-34 $ 9,646
6' Protector Premier Laboratory Hood with built-in exhaust blower, explosion proof
100600070 1180 With sash
fully open
0.17" H2O max external s.p.
With sash fully open
100-115 volts,
60 Hz, 10 amps
3649-35 $ 10,433
See Required Base CabinetsSpillstopper Work SurfacesBlower Selection

8' Protector Premier Laboratory Hoods--All 8' models require a remote blower
8' Protector Premiere Laboratory Hood  
Dimensions
Nominal width 8'
Remote Blower Required 96.0" w x 31.7" d x 59.0" h
(2438.5 x 805.5 x 1499 mm)
Weight:
Remote Blower Required 650.0 lbs. (295.0 kg)

Select models feature: built-in exhaust blower, explosion proof, 1 electrical duplex, and/or service features

 

Labconco Part # Total Exhaust CFM and
Static Pressure Sash Opening
Electrical Cat. # Price
100% (28") Open 62.5% (18") Open
CFM s.p. CFM s.p.
8' Protector Premier Laboratory Hood--Requires remote blower
100800000 1640 0.28" 1025 0.11" 100-115 volts,
50/60 Hz, 10 amps
3649-36 $ 9,435
100800020 208-230 volts,
50/60 Hz, 5 amps
3649-37 $ 9,435
8' Protector Premier Laboratory Hood with 2 Service Fixtures—Requires remote blower
100800021 1640 0.28" 1025 0.11" 208-230 volts,
50/60 Hz, 5 amps
3649-38 $ 10,013
8' Protector Premier Laboratory Hood with 2 Service Fixtures and 1 electrical duplex
Requires remote blower
100800002 1640 0.28" 1025 0.11" 100-115 volts,
50/60Hz, 10 amps
3649-39 $ 10,160
See Required Base CabinetsSpillstopper Work SurfacesBlower Selection
Required Accessories: Contact a Terra product expert about ordering information on blowers and required accessories for the Protector Premier Laboratory Hoods.

Additional features of Protector Premier Laboratory Hoods:

  • Molded fiberglass 12.81" ID exhaust connection(s)
  • Material: glacier white powder-coated steel exterior; powder coated aluminum side handle; tempered safety glass vertical-rising sash ; fiberglass liner
  • Vapor-proof design pre-wired T8 fluorescent lighting
  • ADA-compliant electrical receptacle, switches, service fixtures and blower stitches
  • Optional Accessories available: service fixture kits, electrical duplex kits, airflow monitors, distillation grids, sash stops, snuffer fire extinguisher, ceiling enclosures, rear finish panels, auxiliary-air plenums
  • Required Accessories (not included; see below)
    • Remote Blowers
    • Ductwork
    • SpillStopper™ Work Surfaces
    • Base Stands and Cabinets
  • Select models feature:
    • Built-In Blower:
      • Corrosion-resistant; built-in belt-driven; adjustable sheave; molded thermoplastic housing and non-sparking, coated aluminum impeller
    • Explosion-proof models:
      • Ideal for laboratories dealing with potentially explosive/flammable atmospheres (Class 1 Div I or II).
      • Explosion-proof blower and incandescent light fixture
      • Bulb, switches, electrical receptacles and wiring not included
    • Service Fixtures:
      • 2 pre-plumbed service fixtures with forged brass valves
      • Brass tubing for gas on lower right side; copper tubing for cold water on lower left side
      • Brass and copper fixtures can be converted to air and vacuum with included components
      • Inlet tubing not provided
    • Electrical Duplex:
      • Lower right side has 1 pre-wired GFCI electrical duplex receptacle
Required Accessories
 Base Cabinets for Protector Series Hoods
Protector Acid Storage Cabinets
Protector Acid Storage Cabinets
 

Protector Acid Storage Cabinets

  • Compatible with: Protector XL Benchtop, Protector Premier, XStream, ClassMate, Stainless Steel, and PVC; and HOPEC IV; Basic and Fiberglass 30 Hoods
  • Safely stores corrosive liquids and acids
  • Made with Durable epoxy-coated steel construction; interior made with corrosion-resistant polyethylene
  • Glacier white exterior coordinates with Labconco fume hoods and laboratory casework
  • Includes: Vacuum-formed PVC liner tray, four leveling feet and one 8" filler panel to cabinet depth from 22" to 30"
  • Max. Load Support: 800 lbs.
  • Filler Panel Depth: 8.0" (203.2 mm)
  • Glacier white exterior coordinates with laboratory casework and other Labconco fume hoods
  • Required Accessories: SpillStopper™ Work Surfaces and Flat Work Surfaces
  • Optional Accessories: Vent Kits, Shelf Kits, Filler Panels
  • ADA-Compliant (Select Models)
     
Labconco
Part #
Dimensions
W x D
Max./Min.
Base Height
ADA Compliant Door Weight Cat. # Price
9905000 24" x 22"
(610 x 559 mm)
32.75"
(832 mm)/
31.5"
(800.1 mm)
Yes Single, Right Hinge, Manual Close 120 lbs.
(54 kg)
3649-49 Price
9905100 18" x 22"
(457.2 x 559 mm)
Yes Single, Right Hinge, Manual Close 85 lbs.
(39 kg)
3649-50 Price
9905200 24" x 22"
(610 x 559 mm)
Yes Single, Left Hinge, Manual Close 120 lbs.
(54 kg)
3649-51 Price
9905300 18" x 22"
(457.2 x 559 mm)
Yes Single, Left Hinge,
Manual Close
85 lbs.
(39 kg)
3649-52 Price
9901000 48" x 22"
(1219.5 x 559 mm)
36.75"
(933.5 mm)/
35.5"
(902 mm)
No Dual, Manual Close 260 lbs.
(118 kg)
3649-53 Price
9901100 36" x 22"
(914.5 x 559 mm)
No Dual, Manual Close 180 lbs.
(82 kg)
3647-23 Price
9901200 30" x 22"
(762 x 559 mm)
No Dual, Manual Close 155 lbs.
(70 kg)
3646-51 Price
9901300 24" x 22"
(610 x 559 mm)
No Single, Right Hinge, Manual Close 130 lbs.
(59 kg)
3649-54-220 Price
9901400 18" x 22"
(457.2 x 559 mm)
No Single, Right Hinge, Manual Close 90 lbs.
(41 kg)
3649-55 Price
9901500 24" x 22"
(610 x 559 mm)
No Single, Left Hinge,
Manual Close
130 lbs.
(59 kg)
3649-56 Price
9901600 18" x 22"
(457.2 x 559 mm)
No Single, Left Hinge,
Manual Close
90 lbs.
(41 kg)
3649-57 Price
Top of Page
Protector Solvent Storage Cabinets
Protector Solvent Storage Cabinets
 

Protector Solvent Storage Cabinets

  • Compatible with: Protector XL BenchtopProtector Premier,XStreamClassMateStainless Steel, and PVC; and HOPEC IV; Basic and Fiberglass 30 Hoods
  • Stores and vents flammable liquids and solvents
  • Made with durable dual wall epoxy-coated steel construction with 1.5" air gap
  • Includes: Epoxy-coated steel shelf; Two rear vent connections with flame arrestors and closure plugs; Four leveling feet and one 8" filler panel to increase cabinet depth from 22" to 30"
  • Max. Load support: 800 lbs.
  • Filler Panel Depth: 8.0" (203.2 mm)
  • Glacier white exterior coordinates with laboratory casework and other Labconco fume hoods
  • Required Accessories: SpillStopper™ Work Surfaces and Flat Work Surfaces
  • Optional Accessories: Shelf Kits, Filler Panels ADA-Compliant
  • Select models ADA compliant
     
Labconco
Part #
Dimensions
W x D
Max./Min.
Base Height
ADA
Compliant
Door Weight Cat. # Price
9906000 24" x 22"
(610 x 559 mm)
32.75"
(832 mm)/
31.5"
(800.1 mm)
Yes Single, Right Hinge,
Manual Close
120 lbs.
(54 kg)
3649-58 Price
9906100 24" x 22"
(610 x 559 mm)
Yes Single, Left Hinge,
Manual Close
120 lbs.
(54 kg)
3649-59 Price
9906200 24" x 22"
(610 x 559 mm)
Yes Single, Right Hinge,
Automatic Close
120 lbs.
(54 kg)
3649-60 Price
9906300 24" x 22"
(610 x 559 mm)
Yes Single, Left Hinge,
Automatic Close
120 lbs.
(54 kg)
3649-61 Price
9902000 48" x 22"
(1219.5 x 559 mm)
36.75"
(933.5 mm)/
35.5"
(902 mm)
No Dual, Manual Close 260 lbs.
(118 kg)
3649-62 Price
9902100 36" x 22"
(914.5 x 559 mm)
No Dual, Manual Close 180 lbs.
(82 kg)
3649-63 Price
9902200 30" x 22"
(762 x 559 mm)
No Dual, Manual Close 155 lbs.
(70 kg)
3649-64 Price
9902300 24" x 22"
(610 x 559 mm)
No Single, Right Hinge,
Manual Close
130 lbs.
(59 kg)
3649-65 Price
9902400 24" x 22"
(610 x 559 mm)
No Single, Left Hinge,
Manual Close
130 lbs.
(59 kg)
3649-66 Price
9903000 48" x 22"
(1219.5 x 559 mm)
No Dual, Automatic Close 260 lbs.
(118 kg)
3646-04 Price
9903100 36" x 22"
(914.5 x 559 mm)
No Dual, Automatic Close 180 lbs.
(82 kg)
3646-09 Price
9903200 30" x 22"
(762 x 559 mm)
No Dual, Automatic Close 155 lbs.
(70 kg)
3646-52 Price
9903300 24" x 22"
(610 x 559 mm)
No Single, Right Hinge,
Automatic Close
130 lbs.
(59 kg)
3649-67 Price
9903400 24" x 22"
(610 x 559 mm)
No Single, Left Hinge,
Automatic Close
130 lbs.
(59 kg)
3649-68 Price
Top of Page
Protector Standard Storage Cabinets
48" wide (9900000) with Dual Doors
Protector Standard Storage Cabinets
24" Wide; Right Hinge, Single Door (9904000) ADA Compliant

 

Protector Standard Storage Cabinets

  • Compatible with: Protector XL BenchtopProtector Premier,XStreamXPert Balance Enclosures,  ClassMateStainless Steel, and PVC; and HOPEC IV; Basic and Fiberglass 30 Hoods
  • Stores and vents mild acids, reagents and small lab instruments
  • Made with durable dual wall epoxy-coated steel construction with 1.5" air gap
  • Includes: Epoxy-coated steel shelf; Two rear vent connections with flame arrestors and closure plugs; Four leveling feet and one 8" filler panel to increase cabinet depth from 22" to 30"
  • Max. Load support: 800 lbs.
  • Filler Panel Depth: 8.0" (203.2 mm)
  • Glacier white exterior coordinates with laboratory casework and other Labconco fume hoods
  • Required Accessories: SpillStopper™ Work Surfaces or Flat Work Surfaces (Solid Epoxy or Stainless Steel)
  • Optional Accessories: Shelf Kits, Filler Panels
  • Select models ADA compliant
     
Labconco
Part #
Dimensions
W x D
Max./Min.
Base Height
ADA
Compliant
Door Weight Cat. # Price
9904000 24" x 22"
(610 x 559 mm)
32.75"
(832 mm)/
31.5"
(800.1 mm)
Yes Single, Right Hinge, Manual Close 120 lbs.
(54 kg)
3649-69 Price
9904100 18" x 22"
(457.2 x 559 mm)
Yes Single, Right Hinge, Manual Close 85 lbs.
(39 kg)
3649-70 Price
9904200 12" x 30"
(305 x 762 mm)
Yes Single, Right Hinge, Manual Close 60 lbs.
(27 kg)
3649-71 Price
9904300 24" x 22"
(610 x 559 mm)
Yes Single, Left Hinge,
Manual Close
120 lbs.
(54 kg)
3649-72 Price
9904400 18" x 22"
(457.2 x 559 mm)
Yes Single, Left Hinge,
Manual Close
85 lbs.
(39 kg)
3649-74 Price
9904500 12" x 30"
(305 x 762 mm)
Yes Single, Left Hinge,
Manual Close
60 lbs.
(27 kg)
3649-75 Price
9900000 48" x 22"
(1219.5 x 559 mm)
36.75"
(933.5 mm)/
35.5"
(902 mm
No Dual, Manual Close 260 lbs.
(118 kg)
3646-03 Price
9900100 36" x 22"
(914.5 x 559 mm)
No Dual, Manual Close 180 lbs.
(82 kg)
3646-08 Price
9900200 30" x 22"
(762 x 559 mm)
No Dual, Manual Close 155 lbs.
(70 kg)
3646-53 Price
9900300 24" x 22"
(610 x 559 mm)
No Single, Right Hinge, Manual Close 130 lbs.
(59 kg)
3649-54 Price
9900400 18" x 22"
(457.2 x 559 mm)
No Single, Right Hinge, Manual Close 90 lbs.
(41 kg)
3649-76 Price
9900500 12" x 30"
(305 x 762 mm)
No Single, Right Hinge, Manual Close 65 lbs.
(29 kg)
3649-77 Price
9900600 24" x 22"
(610 x 559 mm)
No Single, Left Hinge,
Manual Close
130 lbs.
(59 kg)
3649-78 Price
9900700 18" x 22"
(457.2 x 559 mm)
No Single, Left Hinge,
Manual Close
90 lbs.
(41 kg)
3649-79 Price
9900800 12" x 30"
(305 x 762 mm)
No Single, Left Hinge,
Manual Close
65 lbs.
(29 kg)
3649-80 Price
 

Description: http://www.labconco.com/images/cms/extralarge/work_surfaces.jpg   Spillstopper Work Surfaces
  • Available in 4', 5', 6', and 8' nominal width work surfaces
  • Made with corrosion resistant epoxy resins
  • Dished and contoured to conform to interior liner of Protector Laboratory Hoods
  • Large radius of front edge aerodynamically directs airflow into fume hood
  • Pre-drilled holes provided for venting and plumbing pass throughs
  • Select Models include 6" x 3"cupsink cutout
4' Spillstopper Work Surface,
30" Interior Depth
  • For use with Protector Premier and Protector XL Laboratory Hoods
  • Dimensions: 48.0" w x 30.0" d x 1.25" h (1219.5 x 762 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 4'
  • Weight: 110 lbs. (50.0 kg)
Labconco Part # Cupsink Cutouts Cat. # Price
9500400 None 3650-87 Price
9500401 Right Rear 3650-88 Price
9500402 Right side. Not for use with Protector Solvent Storage Cabinets 3650-89 Price
9500410 Left rear 3650-90 Price
9500411 Left and right rear 3650-91 Price
9500412 Left rear and right side. Not for use with Protector Solvent Storage Cabinets 3650-92 Price
9500420 Left side. Not for use with Protector Solvent Storage Cabinets. 3650-93 Price
9500421 Left side and right rear. Not for use with Protector Solvent Storage Cabinets 3650-94 Price
9500422 Left and right side. Not for use with Protector Solvent Storage Cabinets 3650-95 Price
5' Spillstopper Work Surface,
30" Interior Depth
  • For use with Protector Premier and Protector XL Laboratory Hoods
  • Dimensions: 60.0" w x 30.0" d x 1.25" h (1524 x 762 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 5'
  • Weight: 150 lbs.(68 kg)
Labconco Part # Cupsink Cutouts Cat. # Price
9500500 None 3650-96 Price
9500501 Right Rear 3650-97 Price
9500502 Right side. Not for use with Protector Solvent Storage Cabinets 3650-98 Price
9500510 Left rear 3650-99 Price
9500511 Left and right rear 3651-00 Price
9500512 Left rear and right side. Not for use with Protector Solvent Storage Cabinets 3651-01 Price
9500520 Left side. Not for use with Protector Solvent Storage Cabinets. 3651-02 Price
9500521 Left side and right rear. Not for use with Protector Solvent Storage Cabinets 3651-03 Price
9500522 Left and right side. Not for use with Protector Solvent Storage Cabinets 3651-04 Price
6' Spillstopper Work Surface,
30" Interior Depth
  • For use with Protector Premier and Protector XL Laboratory Hoods
  • Dimensions: 72.0" w x 30.0" d x 1.25" h (1829 x 762 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 6'
  • Weight: 205 lbs. (93 kg)
Labconco Part # Cupsink Cutouts Cat. # Price
9500600 None 3651-05 Price
9500601 Right Rear 3651-06 Price
9500602 Right side. Not for use with Protector Solvent Storage Cabinets 3651-07 Price
9500610 Left rear 3651-08 Price
9500611 Left and right rear 3651-09 Price
9500612 Left rear and right side. Not for use with Protector Solvent Storage Cabinets 3651-10 Price
9500620 Left side. Not for use with Protector Solvent Storage Cabinets. 3651-11 Price
9500621 Left side and right rear. Not for use with Protector Solvent Storage Cabinets 3651-12 Price
9500622 Left and right side. Not for use with Protector Solvent Storage Cabinets 3651-13 Price
8' Spillstopper Work Surface,
30" Interior Depth
  • For use with Protector Premier and Protector XL Laboratory Hoods
  • Dimensions: 96.0" w x 30.0" d x 1.25" h. (2438.5 x 762 x 31.75 mm)
  • Hood, Enclosure or Glove Box Width: 8'
  • Weight: 240 lbs. (109 kg)
Labconco Part # Cupsink Cutouts Cat. # Price
9500800 None 3651-14 Price
9500801 Right Rear 3651-15 Price
9500802 Right side. Not for use with Protector Solvent Storage Cabinets 3651-16 Price
9500810 Left rear 3651-17 Price
9500811 Left and right rear 3651-18 Price
9500812 Left rear and right side. Not for use with Protector Solvent Storage Cabinets 3651-19 Price
9500820 Left side. Not for use with Protector Solvent Storage Cabinets. 3651-20 Price
9500821 Left side and right rear. Not for use with Protector Solvent Storage Cabinets 3651-21 Price
9500822 Left and right side. Not for use with Protector Solvent Storage Cabinets 3651-22 Price
Top of Page

Blower Selection (Contact Terra about ordering information for blowers)
Upon selection of your laboratory hood for use with a remote blower, the next step is in choosing the blower that will best suit your application. Blowers are available in various sizes that can handle airflow from 250 CFM to 3500 CFM. All blowers have curved impellers that provide optimum air delivery and quiet operation. There are three types of remote blowers available for the Protector Premier Laboratory Hoods: Coated Steel, Fiberglass or PVC. For assistance in determining the correct blower for your fume hood and ducting options contact a Terra product expert for assistance.
Coated Steel Blower   Coated Steel Blowers are ideal for demanding day-to-day ventilation requirements in low to moderately corrosive applications. The phenolic coating on the impeller and housing provide corrosion resistance. Coated steel blowers are available in a broad spectrum of capacities from 300 to 2150 CFM at static pressures of up to 1.50" H20.
Labconco Part # Weight Electrical Inlet/
Outlet
RPM
Range
HP CFM Range Cat. # Price
7068000 92 lbs.
(42 kg)
115 V, 60 Hz,
1 phase, 4.0 amps
10.78" ID/5.5" d x 10.00" w 529-807 1/6 Less than 1000 3645-52 Price
7068200 92 lbs.
(42 kg)
115V, 60 Hz,
1 phase, 4.4 amps
752-1067 1/4 Less than 1000 3645-53 Price
7068400 86 lbs.
(39 kg)
115V, 60 Hz, 1 phase, 6.1 amps 929-1260 1/3 Less than 1000 3650-35 Price
7068600 88 lbs.
(40 kg)
115V, 60 Hz, 1 phase, 8.4 amps 1073-1456 1/2 Less than 1000 3650-36 Price
7068800 90 lbs.
(41 kg)
115V, 60 Hz, 1 phase, 6.1 amps 12.25" OD/
7" d x 13.50" w
373-569 1/3 Less than 1000 3650-37 Price
7069000 96 lbs.
(44 kg)
115V/60 Hz/1Ø/8.4 amps 532-753 1/2 Between 1000 and 2000 3650-38 Price
7069200 100 lbs.
(45 kg)
115V, 11.6amps/
230V, 5.8 amps/60 Hz/1 phase
667-946 3/4 Between 1000 and 2000 3650-39 Price
7069400 100 lbs.
(45 kg)
115V, 13.6 amps/230V, 6.8 amps/60 Hz/1Ø 828-1173 1 Between 1000 and 2000 3650-40 Price
7069600 114 lbs.
(52 kg)
115V, 20.4amps/230V, 10.2 amps/60 Hz/1Ø 881-1248 1 1/2 Between 2000 and 3000 3650-85 Price
Explosion Proof Coated Steel Blowers
7068100 92 lbs.
(42 kg)
115V/60 Hz/1Ø/3.15 amps 10.78" ID/5.5" d x 10.00" w 529-807 1/6 Less than 1000 3650-42 Price
7068300* 92 lbs.
(42 kg)
115V/60 Hz/1Ø/4.5 amps 752-1067 1/4 Less than 1000 3650-43 Price
7068500* 86 lbs.
(39 kg)
115V/60 Hz/1Ø/6.4 amps 929-1260 1/3 Less than 1000 3650-44 Price
7068700 98 lbs.
(44 kg)
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø 1073-1456 1/2 Less than 1000 3650-45 Price
7068900 90 lbs.
(41 kg)
115V/60 Hz/1Ø/6.4 amps 12.25" OD/
7" d x 13.50" w
373-569 1/3 Less than 1000 3650-46 Price
7069100 102 lbs.
(46 kg)
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø 532-753 1/2 Between 1000 and 2000 3650-47 Price
7069300 108 lbs.
(49)
115V, 11.4 amps/230V, 5.7 amps/60 Hz/1Ø 667-946 3/4 Between 1000 and 2000 3650-58 Price
7069500 114 lbs.
(52 kg)
115V, 13.6 amps/230V, 6.8 amps/60 Hz/1Ø 828-1173 1 Between 1000 and 2000 3650-59 Price
7069700 114 lbs.
(52 kg)
230V, 4.8 amps/460V, 2.4 amps/60 Hz/3Ø 881-1248 1 1/2 Between 2000 and 3000 3650-60 Price
7071900 100 lbs.
(45.5 kg)
230V, 5.8 amps/
460V, 2.9 amps,60 Hz
828-1173 1 Between 1000 and 2000 3650-61 Price
 
fiberglass blowers   Fiberglass Blowers provide outstanding corrosion resistance and they are ideal in moderate to highly corrosive conditions (not recommended for use with perchloric acid-see PVC blowers). The housings are made from molded fiberglass reinforced polyester for durability and long life and the injection-molded polypropylene impellers resist corrosive atmospheres. Fiberglass blowers perform in a range of capacities from 250 to 3500 CFM at static pressures of up to 4.0".
Labconco Part # Weight Electrical Inlet/
Outlet
RPM
Range
HP CFM Range Cat. # Price
7180000 92 lbs.
(42 kg)
115V/60 Hz/1Ø/4.0 amps 10.38" OD Inlet, 10.75" ID Outlet 630-962 1/6 Less than 1000 3650-86 Price
7180200 92 lbs.
(42 kg)
115V/60 Hz/1Ø/4.4 amps 828-1173 1/4 Less than 1000 3646-57 Price
7180400 86 lbs.
(39 KG)
115V/60 Hz/1Ø/6.1 amps 1073-1456 1/3 Less than 1000 3650-62 Price
7180600 88 lbs.
(40 kg)
115V/60 Hz/1Ø/8.4 amps 1305-1772 1/2 Less than 1000 3650-63 Price
7180800 90 lbs.
(41 kg)
115V/60 Hz/1Ø/4.0 amps 12.38" OD Inlet, 12.75" ID Outlet 373-569 1/6 Less than 1000 3650-64 Price
7181000 96 lbs.
(44 kg)
115V/60 Hz/1Ø/4.4 amps 532-753 1/4 Less than 1000 3650-65 Price
7181200 100 lbs.
(45 kg)
115V/60 Hz/1Ø/8.4 amps 690-978 1/2 Between 1000 and 2000 3650-66 Price
7181400 100 lbs.
(45 kg)
115V, 11.6 amps/230V, 5.8 amps/60 Hz/1Ø 920-1303 3/4 Between 1000 and 2000 3650-67 Price
7181600 114 lbs.
(52 kg)
115V, 20.4 amps/230V, 10.2 amps/60 Hz/1Ø 1207-1639 1 1/2 Between 1000 and 2000 3650-68 Price
7182000 290 lbs.
(132 kg)
208-230V, 6.8 amps/ 460V, 3.4 amps/60 Hz/3Ø 15.63" OD Inlet, 16" ID Outlet 1083-1469 2 Between 2000 and 3000 3650-69 Price
7182200 365 lbs.
(166 kg)
208-230V, 9.7 amps/ 460V, 4.85 amps/60 Hz/3Ø 1309-1777 3 Greater than 3000 3650-70 Price
Explosion Proof Fiberglass Blowers
Labconco Part # Weight Electrical Inlet/
Outlet
RPM
Range
HP CFM Range Cat. # Price
7180100 92 lbs.
(42 kg)
115V/60 Hz/1Ø/3.15 amps 10.38" OD Inlet, 10.75" ID Outlet 630-962 1/6 Less than 1000 3650-71 Price
7180300 92 lbs.
(42 kg)
115V/60 Hz/1Ø/4.5 amps 828-1173 1/4 Less than 1000 3650-73 Price
7180500 86 lbs. (39 KG) 115V/60 Hz/1Ø/6.4 amps 1073-1456 1/3 Less than 1000 3650-72 Price
7180700 98 lbs.
(44 kg)
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø 1305-1772 1/2 Less than 1000 3650-74 Price
7180900 90 lbs.
(41 kg)
115V/60 Hz/1Ø/3.15 amps 12.38" OD Inlet, 12.75" ID Outlet 373-569 1/6 Less than 1000 3650-75 Price
7181100 102 lbs.
(46 kg)
115V/60 Hz/1Ø/4.5 amps 532-753 1/4 Less than 1000 3650-76 Price
7181300 108 lbs.
(49 kg)
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø 690-978 1/2 Between 1000 and 2000 3650-77 Price
7181500 114 lbs.
(52 kg)
115V, 11.4 amps/230V, 5.7 amps/60 Hz/1Ø 920-1303 3/4 Between 1000 and 2000 3650-78 Price
7181700 114 lbs.
(52 kg)
230V, 4.8 amps/460V, 2.4 amps/60 Hz/3Ø 1207-1639 1 1/2 Between 1000 and 2000 3650-79 Price
7182100 345 lbs.
(156 kg)
208-230V, 6.0 amps/ 460V, 3.0 amps/60 Hz/3Ø 15.63" OD Inlet, 16" ID Outlet 1083-1469 2 Between 2000 and 3000 3650-80 Price
7182300 370 lbs.
(168 kg)
208-230V, 8.4 amps/
460V, 4.2 amps/60 Hz/3Ø
1309-1777 3 Greater than 3000 3650-81 Price
     
PVC Blower   PVC Blowers are ideal for highly corrosive applications and are designed to handle perchloric acid and other high order oxidizers. The vacuum formed housings are specifically made with unplasticized Type I polyvinyl chloride for complete corrosion protection. Impellers are made of injection molded PVDF for superior resistance against highly corrosive atmospheres. A drain connection on the lower portion of the housing allows utilization of a washdown system. PVC blowers perform with capacities from 390 to 1900 CFM at static pressures of up to 1.50".
Labconco Part # Weight Electrical Inlet/
Outlet
RPM
Range
HP CFM Range Cat. # Price
7183000 90 lbs. (41 kg) 115V/60 Hz/1Ø/8.4 amps 10.38" OD Inlet, 10.75" ID Outlet 1150-1561 1/2 Less than 1000 3650-82 Price
7183100 90 lbs. (41 kg) 115V/60 Hz/1Ø/8.4 amps 12.38" OD Inlet, 12.75" ID Outlet 881-1248 1/2 Between 1000 and 2000 3650-83 Price
7183200 100 lbs. (45 kg) 115V, 13.6 amps/230V, 6.8 amps/60 Hz/1Ø 1208-1639 1 Between 1000 and 2000 3650-84 Price

Related Products:

Top of Page

Protector Premier Hoods with Built-In Blower Dimensional Data
Built in Blower data

CFM, S.P., Nominal Ductwork Diameter and Equivalent Resistance Specifications for Models with Built-In Blower
built in blower unit

Protector Premier Hoods Remote Blower Dimensional Data
Remote blower data

CFM, S.P., Nominal Ductwork Diameter and Equivalent Resistance Specifications for Models Requiring Remote Blowers
Remote blower unit specs
Top of Page

File Type File Name Publication Date
Brochure (PDF) Protector Laboratory Fume Hoods Brochure by Labconco
Provides a brief introduction to features and available accessories for Protector Laboratory Fume Hoods by Labconco. Product specifications included.
04/08/2016
White Paper (PDF) Face Velocity Standards, by Labconco
Learn more about fume hoods, specifically the performance of a fume hood — what’s important and how to test for it.
05/18/2015
White Paper (PDF) What Type of Fume Hood do I Specify? By Labconco
Tips and considerations for choosing the best fume hood for your laboratory and applications.
05/18/2015
White Paper (PDF) Spillstopper Work Surface Compatibility Chart for Protector Premier Models by Labconco
Find out which Spillstopper Work Surface is compatible with the Protector Premier Laboratory Fume Hoods by Labconco. Product specifications included.
07/01/2016
Click to leave a message. 24-hour sales and tech phone support, M - F
Go to...
Go To
Laboratory-Equipment.com