Protector® ClassMate® Laboratory Fume Hoods
by Labconco
|
 |
| Provides unobstructed view for student observation during demonstrations (Vertical-rising sash shown) |
|
|
| |
Designed for instructional and educational laboratories, Protector ClassMate benchtop hoods have a taller front viewing window and glass sides and back for maximum full view of instructional procedures.
- Choose from vertical-rising or combination horizontal sliding/vertical-rising sash models in 4', 5' and 6' widths
- Full visibility with tempered glass front viewing window, back, sides and baffle
- 39" viewing height with static viewing panel above sash frame; 26' working depth
- Ergonomic 5" angled sash and panel eliminates glare
- Restricted sash opening conserves energy
- Required Accessories: Base Cabinets, Remote Blowers, Spillstopper Work Surfaces, Ductwork
- Optional Accessories: Distillation Grid Kits, Guardian Airflow Monitors, Rear Finish Panel Kits
- Application: Laboratory training, instruction, education and observation
- One-Year Manufacturer Warranty from date of installation or Two-Year Manufacturer Warranty from date of shipment
|
|
| Ordering Information |
| Protector ClassMate Vertical-Rising Sash Lab Hoods |
 |
|
| Labconco Part # |
Service Fixtures |
Electrical Duplexes |
Digital Monitor |
Shipping Weight
Lbs.kg |
Cat. # |
Price |
| 4' Protector ClassMate Lab Hood, 115V |
| 6970400 |
None |
None |
No |
400/181 |
3645-05 |
Call TUI |
| 6970401 |
4 |
2 |
No |
400/181 |
3645-06 |
Call TUI |
| 5' Protector ClassMate Lab Hood, 115V |
| 6970500 |
None |
None |
No |
460/209 |
3645-07 |
Call TUI |
| 6970501 |
4 |
2 |
No |
460/209 |
3645-08 |
Call TUI |
| 6' Protector ClassMate Lab Hood, 115V |
| 6970600 |
None |
None |
No |
550/249 |
3645-09 |
Call TUI |
| 6970601 |
4 |
2 |
No |
550/249 |
3645-10 |
Call TUI |
- By-pass airflow on anti-racking vertical-rising sash models
- Required Accessories: Base Cabinets, Remote Blowers, Spillstopper Work Surfaces, Ductwork
- Conformance: CFR 29, Part 1910, SEFA 1-2010, NFPA 45-2011, ASHRAE 110-1995, ANSI Z9.5-2011, UL 61010-1, CAN/CSA C22.2 No. 61010.1, UL 1805,SEFA 8-2010, Cabinet Surface Finish Tests
|
| |
|
|
|
Protector ClassMate HOPEC IV Combination Sash Lab Hoods
|
 |
|
| Labconco Part # |
Service Fixtures |
Electrical Duplexes |
Digital Monitor |
Shipping Weight
Lbs.kg |
Cat. # |
Price |
| 4' Protector ClassMate HOPEC IV Lab Hood, 115V |
| 6971400 |
None |
None |
No |
485/220 |
3645-11 |
Call TUI |
| 6971401 |
4* |
2 |
Yes |
485/220 |
3645-12 |
Call TUI |
| 5' Protector ClassMate HOPEC IV Lab Hood, 115V |
| 6971500 |
None |
None |
No |
570/259 |
3645-13 |
Call TUI |
| 6971501 |
4* |
2 |
Yes |
570/259 |
3645-14 |
Call TUI |
| 6' Protector ClassMate HOPEC IV Lab Hood, 115V |
| 6971600 |
None |
None |
No |
680/308 |
3645-15 |
Call TUI |
| 6971601 |
4* |
2 |
Yes |
680/308 |
3645-16 |
Call TUI |
|
*Includes one rigid gooseneck faucet for cold water
4’ models 30W fluorescent lamps
5’ and 6’ models with 40W fluorescent lamps
|
- Restricted by-pass airflow on horizontal sliding/vertical-rising sash
- Hood can be operated with sash open horizontally or vertically
- Sash pocket blocks upper by-pass and reduces amount of exhausted air
- Easy to see yellow air foil with recessed sash back
- Powder-coated sash pocket located behind front panel
- Required Accessories: Base Cabinets, Remote Blowers, Spillstopper Work Surfaces, Ductwork
- Conformance: CFR 29, Part 1910, SEFA 1-2010, NFPA 45-2011, ASHRAE 110-1995, ANSI Z9.5-2011, UL 61010-1, CAN/CSA C22.2 No. 61010.1, UL 1805,SEFA 8-2010, Cabinet Surface Finish Tests
|
|
 |
 |
 |
|
Maximum visibility
Front viewing window made with tempered safety glass while laminated glass sides and back provide full view of contents and demonstration procedures
|
Clean-Sweep™ airflow
Clean-Sweep™ airflow creates a constant barrier of protection from contaminants by allowing clean air to continuously flow over air foil by drawing air from under air foil.
|
Easy-to-clean and color-coded
Except for vertical-rising sashes, all glass components are removable for easy cleaning. Gas, air, water and vacuum fixtures are color-coded for easy identification.
|
|
Specifications
| Dimensions |
- 4' Protector ClassMate: 48.0" x 32.25" x 59.0" (1219.2 x 819.15 x 1498.6 mm)
- 5' Protector ClassMate: 60.0" w x 32.25" d x 59.0" h (1524 x 819.15 x 1498.6 mm)
- 6' Protector ClassMate: 72.0" w x 32.25" d x 59.0" h (1828.8 x 819.15 x 1498.6 mm)
|
| Electrical |
115 volts, 60 Hz, 15 amps, Domestic |
| Material |
- Tempered safety glass sides, back and baffle
- Glacier white epoxy-coated steel and aluminum frame
- 8.63" ID epoxy-coated steel exhaust connection
|
| Type |
Benchtop |
| Required Accessories |
|
| Optional Accessories |
|
| |
- Removable glass components (vertical-rising sashes not removable
- Two fluorescent lamps: energy-efficient, rapid start lighting located outside hood interior and behind laminated safety glass shield for easy replacement and corrosion-resistance
- Color-coded service fixtures
- Baffle directs airflow to rear of interior
- Low profile trough; interior plates
- Ergonomic air foil
- Tissue screen directly below exhaust outlet
- Pre-wired electrical components
- Fixtured models have four pre-plumbed service fixtures
- Streamlined corner posts for maximum visibility of working area
- Factory prepared for up to 8 service fixtures
|
Total Exhaust CFM and Static Pressure
| Vertical-Rising Sash |
| Labconco Part # |
Total Exhaust CFM and Static Pressure
at 18" sash opening height (60% open)* |
| 100 fpm |
S.P. |
80 fpm |
S.P. |
60 fpm |
S.P. |
| 4' Protector ClassMate Lab Hood, 115V |
| 6970400 |
570 |
0.24" |
460 |
0.16" |
340 |
0.09" |
| 6970401 |
570 |
0.24" |
460 |
0.16" |
340 |
0.09" |
| 5' Protector ClassMate Lab Hood, 115V |
| 6970500 |
730 |
0.39" |
590 |
0.26" |
440 |
0.14" |
| 6970501 |
730 |
0.39" |
590 |
0.26" |
440 |
0.14" |
| 6' Protector ClassMate Lab Hood, 115V |
| 6970600 |
890 |
0.51" |
710 |
0.33" |
540 |
0.19" |
| 6970601 |
890 |
0.51" |
710 |
0.33" |
540 |
0.19" |
| Combination Sash |
| Labconco Part # |
Total Exhaust CFM and Static Pressure
at 50% sash opening height horizontally or vertically |
| 100 fpm |
S.P. |
80 fpm |
S.P. |
60 fpm |
S.P. |
| 4' Protector ClassMate HOPEC IV Lab Hood, 115V |
| 6971400 |
470 |
0.16" |
380 |
0.11" |
280 |
0.06" |
| 6971401 |
470 |
0.16" |
380 |
0.11" |
280 |
0.06" |
| 5' Protector ClassMate HOPEC IV Lab Hood, 115V |
| 6971500 |
550 |
0.22" |
440 |
0.14" |
330 |
0.08" |
| 6971501 |
550 |
0.22" |
440 |
0.14" |
330 |
0.08" |
| 6' Protector ClassMate HOPEC IV Lab Hood, 115V |
| 6971600 |
680 |
0.30" |
550 |
0.20" |
410 |
0.11" |
| 6971601 |
680 |
0.30" |
550 |
0.20" |
410 |
0.11" |
|
| Required Accessories |
| Cabinets |
 |
|
Protector Acid Storage Cabinets
- Compatible with: Protector XL Benchtop, Protector Premier, XStream, ClassMate, Stainless Steel, and PVC; and HOPEC IV; Basic and Fiberglass 30 Hoods
- Safely stores corrosive liquids and acids
- Made with Durable epoxy-coated steel construction; interior made with corrosion-resistant polyethylene
- Glacier white exterior coordinates with Labconco fume hoods and laboratory casework
- Includes: Vacuum-formed PVC liner tray, four leveling feet and one 8" filler panel to cabinet depth from 22" to 30"
- Max. Load Support: 800 lbs.
- Filler Panel Depth: 8.0" (203.2 mm)
- Glacier white exterior coordinates with laboratory casework and other Labconco fume hoods
- Required Accessories: SpillStopper™ Work Surfaces and Flat Work Surfaces
- Optional Accessories: Vent Kits, Shelf Kits, Filler Panels
- ADA-Compliant (Select Models)
- Choose stand with the same width as your ClassMate hood
|
|
|
|
Labconco
Part # |
Dimensions
W x D |
Max./Min.
Base Height |
ADA Compliant |
Door |
Weight |
Cat. # |
Price |
| 9905000 |
24" x 22"
(610 x 559 mm) |
32.75"
(832 mm)/
31.5"
(800.1 mm) |
Yes |
Single, Right Hinge, Manual Close |
120 lbs.
(54 kg) |
3649-49 |
$ 1,275 |
| 9905100 |
18" x 22"
(457.2 x 559 mm) |
Yes |
Single, Right Hinge, Manual Close |
85 lbs.
(39 kg) |
3649-50 |
$ 1,227 |
| 9905200 |
24" x 22"
(610 x 559 mm) |
Yes |
Single, Left Hinge, Manual Close |
120 lbs.
(54 kg) |
3649-51 |
$ 1,275 |
| 9905300 |
18" x 22"
(457.2 x 559 mm) |
Yes |
Single, Left Hinge,
Manual Close |
85 lbs.
(39 kg) |
3649-52 |
$ 1,227 |
| 9901000 |
48" x 22"
(1219.5 x 559 mm) |
36.75"
(933.5 mm)/
35.5"
(902 mm) |
No |
Dual, Manual Close |
260 lbs.
(118 kg) |
3649-53 |
$ 1,377 |
| 9901100 |
36" x 22"
(914.5 x 559 mm) |
No |
Dual, Manual Close |
180 lbs.
(82 kg) |
3647-23 |
$ 1,301 |
| 9901200 |
30" x 22"
(762 x 559 mm) |
No |
Dual, Manual Close |
155 lbs.
(70 kg) |
3646-51 |
$ 1,254 |
| 9901300 |
24" x 22"
(610 x 559 mm) |
No |
Single, Right Hinge, Manual Close |
130 lbs.
(59 kg) |
3649-73 |
$ 1,212 |
| 9901400 |
18" x 22"
(457.2 x 559 mm) |
No |
Single, Right Hinge, Manual Close |
90 lbs.
(41 kg) |
3649-55 |
$ 1,167 |
| 9901500 |
24" x 22"
(610 x 559 mm) |
No |
Single, Left Hinge,
Manual Close |
130 lbs.
(59 kg) |
3649-56 |
$ 1,212 |
| 9901600 |
18" x 22"
(457.2 x 559 mm) |
No |
Single, Left Hinge,
Manual Close |
90 lbs.
(41 kg) |
3649-57 |
$ 1,167 |
|
|
 |
|
Protector Solvent Storage Cabinets
- Compatible with: Protector XL Benchtop, Protector Premier, XStream, ClassMate, Stainless Steel, and PVC; HOPEC IV; Basic and Fiberglass 30 Hoods
- Stores and vents flammable liquids and solvents
- Made with durable dual wall epoxy-coated steel construction with 1.5" air gap
- Includes: Epoxy-coated steel shelf; Two rear vent connections with flame arrestors and closure plugs; Four leveling feet and one 8" filler panel to increase cabinet depth from 22" to 30"
- Max. Load support: 800 lbs.
- Filler Panel Depth: 8.0" (203.2 mm)
- Glacier white exterior coordinates with laboratory casework and other Labconco fume hoods
- Required Accessories: SpillStopper™ Work Surfaces and Flat Work Surfaces
- Optional Accessories: Shelf Kits, Filler Panels ADA-Compliant
- Select models ADA compliant
- Choose stand with the same width as your ClassMate hood
|
| |
|
Top of page |
Labconco
Part # |
Dimensions
W x D |
Max./Min.
Base Height |
ADA
Compliant |
Door |
Weight |
Cat. # |
Price |
| 9906000 |
24" x 22"
(610 x 559 mm) |
32.75"
(832 mm)/
31.5"
(800.1 mm) |
Yes |
Single, Right Hinge,
Manual Close |
120 lbs.
(54 kg) |
3649-58 |
$ 1,711 |
| 9906100 |
24" x 22"
(610 x 559 mm) |
Yes |
Single, Left Hinge,
Manual Close |
120 lbs.
(54 kg) |
3649-59 |
$ 1,711 |
| 9906200 |
24" x 22"
(610 x 559 mm) |
Yes |
Single, Right Hinge,
Automatic Close |
120 lbs.
(54 kg) |
3649-60 |
$ 1,999 |
| 9906300 |
24" x 22"
(610 x 559 mm) |
Yes |
Single, Left Hinge,
Automatic Close |
120 lbs.
(54 kg) |
3649-61 |
$ 1,999 |
| 9902000 |
48" x 22"
(1219.5 x 559 mm) |
36.75"
(933.5 mm)/
35.5"
(902 mm) |
No |
Dual, Manual Close |
260 lbs.
(118 kg) |
3649-62 |
$ 1,826 |
| 9902100 |
36" x 22"
(914.5 x 559 mm) |
No |
Dual, Manual Close |
180 lbs.
(82 kg) |
3649-63 |
$ 1,753 |
| 9902200 |
30" x 22"
(762 x 559 mm) |
No |
Dual, Manual Close |
155 lbs.
(70 kg) |
3649-64 |
$ 1,696 |
| 9902300 |
24" x 22"
(610 x 559 mm) |
No |
Single, Right Hinge,
Manual Close |
130 lbs.
(59 kg) |
3649-65 |
$ 1,654 |
| 9902400 |
24" x 22"
(610 x 559 mm) |
No |
Single, Left Hinge,
Manual Close |
130 lbs.
(59 kg) |
3649-66 |
$ 1,654 |
| 9903000 |
48" x 22"
(1219.5 x 559 mm) |
No |
Dual, Automatic Close |
260 lbs.
(118 kg) |
3646-04 |
$ 2,366 |
| 9903100 |
36" x 22"
(914.5 x 559 mm) |
No |
Dual, Automatic Close |
180 lbs.
(82 kg) |
3646-09 |
$ 2,276 |
| 9903200 |
30" x 22"
(762 x 559 mm) |
No |
Dual, Automatic Close |
155 lbs.
(70 kg) |
3646-52 |
$ 2,232 |
| 9903300 |
24" x 22"
(610 x 559 mm) |
No |
Single, Right Hinge,
Automatic Close |
130 lbs.
(59 kg) |
3649-67 |
$ 1,932 |
| 9903400 |
24" x 22"
(610 x 559 mm) |
No |
Single, Left Hinge,
Automatic Close |
130 lbs.
(59 kg) |
3649-68 |
$ 1,932 |
|
|
48" wide (9900000) with Dual Doors
24" Wide; Right Hinge, Single Door (9904000) ADA Compliant
|
|
Protector Standard Storage Cabinets
- Compatible with: Protector XL Benchtop, Protector Premier, XStream, ClassMate, Stainless Steel, and PVC; HOPEC IV; Basic and Fiberglass 30 Hoods
- Stores and vents flammable liquids and solvents
- Made with durable dual wall epoxy-coated steel construction with 1.5" air gap
- Includes: Epoxy-coated steel shelf; Two rear vent connections with flame arrestors and closure plugs; Four leveling feet and one 8" filler panel to increase cabinet depth from 22" to 30"
- Max. Load support: 800 lbs.
- Filler Panel Depth: 8.0" (203.2 mm)
- Glacier white exterior coordinates with laboratory casework and other Labconco fume hoods
- Required Accessories: SpillStopper™ Work Surfaces and Flat Work Surfaces
- Optional Accessories: Shelf Kits, Filler Panels ADA-Compliant
- Select models ADA compliant
- Choose stand with the same width as your ClassMate hood
|
| |
|
Top of page |
Labconco
Part # |
Dimensions
W x D |
Max./Min.
Base Height |
ADA
Compliant |
Door |
Weight |
Cat. # |
Price |
| 9904000 |
24" x 22"
(610 x 559 mm) |
32.75"
(832 mm)/
31.5"
(800.1 mm) |
Yes |
Single, Right Hinge, Manual Close |
120 lbs.
(54 kg) |
3649-69 |
$ 1,069 |
| 9904100 |
18" x 22"
(457.2 x 559 mm) |
Yes |
Single, Right Hinge, Manual Close |
85 lbs.
(39 kg) |
3649-70 |
$ 1,031 |
| 9904200 |
12" x 30"
(305 x 762 mm) |
Yes |
Single, Right Hinge, Manual Close |
60 lbs.
(27 kg) |
3649-71 |
$ 979 |
| 9904300 |
24" x 22"
(610 x 559 mm) |
Yes |
Single, Left Hinge,
Manual Close |
120 lbs.
(54 kg) |
3649-72 |
$ 1,069 |
| 9904400 |
18" x 22"
(457.2 x 559 mm) |
Yes |
Single, Left Hinge,
Manual Close |
85 lbs.
(39 kg) |
3649-74 |
$ 1,031 |
| 9904500 |
12" x 30"
(305 x 762 mm) |
Yes |
Single, Left Hinge,
Manual Close |
60 lbs.
(27 kg) |
3649-75 |
$ 979 |
| 9900000 |
48" x 22"
(1219.5 x 559 mm) |
36.75"
(933.5 mm)/
35.5"
(902 mm |
No |
Dual, Manual Close |
260 lbs.
(118 kg) |
3646-03 |
$ 1,185 |
| 9900100 |
36" x 22"
(914.5 x 559 mm) |
No |
Dual, Manual Close |
180 lbs.
(82 kg) |
3646-08 |
$ 1,083 |
| 9900200 |
30" x 22"
(762 x 559 mm) |
No |
Dual, Manual Close |
155 lbs.
(70 kg) |
3646-53 |
$ 1,054 |
| 9900300 |
24" x 22"
(610 x 559 mm) |
No |
Single, Right Hinge, Manual Close |
130 lbs.
(59 kg) |
3649-54 |
$ 1,005 |
| 9900400 |
18" x 22"
(457.2 x 559 mm) |
No |
Single, Right Hinge, Manual Close |
90 lbs.
(41 kg) |
3649-76 |
$ 960 |
| 9900500 |
12" x 30"
(305 x 762 mm) |
No |
Single, Right Hinge, Manual Close |
65 lbs.
(29 kg) |
3649-77 |
$ 915 |
| 9900600 |
24" x 22"
(610 x 559 mm) |
No |
Single, Left Hinge,
Manual Close |
130 lbs.
(59 kg) |
3649-78 |
$ 1,005 |
| 9900700 |
18" x 22"
(457.2 x 559 mm) |
No |
Single, Left Hinge,
Manual Close |
90 lbs.
(41 kg) |
3649-79 |
$ 960 |
| 9900800 |
12" x 30"
(305 x 762 mm) |
No |
Single, Left Hinge,
Manual Close |
65 lbs.
(29 kg) |
3649-80 |
$ 915 |
|
|
|
|
| Top of page |
|
 Moderate to highly corrosive hood applications
|
|
Coated Steel Remote Blowers
- For use with Labconco Laboratory fume hoods, canopy-ducted Type A2 cabinets and required for Type B2 cabinets
- Low to moderately corrosive hood applications
- Flow-through vent holes and louvers cools motor by circulating air; extends motor life
- Material: corrosion resistant phenolic-coated impeller and housing; powder-coated steel base resist extreme weather
- Includes removable weather cover for easy lubrication; sheave alignment enhances performance and extends motor life
- Motor: belt-drive with adjustable sheave and self-adjusting gravity belt tightener
- Durable and easy maintenance with factory lubricated pillow block bearings
- Flexible installation with adjustable variable exhaust orientation (adjusts to 8 outlet positions)
- Quiet operation and optimum air delivery with balanced air impellers
- Quiet operation: 64-88 decibels depending on blower size
- Meets demanding daily ventilation requirements of various hood types
- Available in a wide range of capacities from 370 to 1960 CFM at static pressures to 1.50" H20
- Contact a Terra product expert for electrical configurations
- *Power Cord & Plug: 8', 3-wire cord, and plug
- Manufacturer Warranty: One year parts and labor from date of installation or two years from date of shipment
|
| |
|
Top of page |
| Labconco Part # |
Weight |
Electrical |
Inlet/
Outlet |
RPM
Range |
HP |
CFM Range |
Cat. # |
Price |
| 7068000 |
92 lbs.
(42 kg) |
115 V, 60 Hz,
1 phase, 4.0 amps |
10.78" ID/5.5" d x 10.00" w |
529-807 |
1/6 |
Less than 1000 |
3645-52 |
$ 1,657 |
| 7068200 |
92 lbs.
(42 kg) |
115V, 60 Hz,
1 phase, 4.4 amps |
752-1067 |
1/4 |
Less than 1000 |
3645-53 |
$ 1,751 |
| 7068400 |
86 lbs.
(39 kg) |
115V, 60 Hz, 1 phase, 6.1 amps |
929-1260 |
1/3 |
Less than 1000 |
3650-35 |
$ 1,712 |
| 7068600 |
88 lbs.
(40 kg) |
115V, 60 Hz, 1 phase, 8.4 amps |
1073-1456 |
1/2 |
Less than 1000 |
3650-36 |
$ 1,816 |
| 7068800 |
90 lbs.
(41 kg) |
115V, 60 Hz, 1 phase, 6.1 amps |
12.25" OD/
7" d x 13.50" w |
373-569 |
1/3 |
Less than 1000 |
3650-37 |
$ 1,853 |
| 7069000 |
96 lbs.
(44 kg) |
115V/60 Hz/1Ø/8.4 amps |
532-753 |
1/2 |
Between 1000 and 2000 |
3650-38 |
$ 1,933 |
| 7069200 |
100 lbs.
(45 kg) |
115V, 11.6amps/
230V, 5.8 amps/60 Hz/1 phase |
667-946 |
3/4 |
Between 1000 and 2000 |
3650-39 |
$ 2,128 |
| 7069400 |
100 lbs.
(45 kg) |
115V, 13.6 amps/230V, 6.8 amps/60 Hz/1Ø |
828-1173 |
1 |
Between 1000 and 2000 |
3650-40 |
$ 2,283 |
| 7069600 |
114 lbs.
(52 kg) |
115V, 20.4amps/230V, 10.2 amps/60 Hz/1Ø |
881-1248 |
1 1/2 |
Between 2000 and 3000 |
3650-85 |
$ 2,370 |
| Explosion Proof Coated Steel Blowers |
| 7068100 |
92 lbs.
(42 kg) |
115V/60 Hz/1Ø/3.15 amps |
10.78" ID/5.5" d x 10.00" w |
529-807 |
1/6 |
Less than 1000 |
3650-42 |
$ 2,283 |
| 7068300* |
92 lbs.
(42 kg) |
115V/60 Hz/1Ø/4.5 amps |
752-1067 |
1/4 |
Less than 1000 |
3650-43 |
$ 2,370 |
| 7068500* |
86 lbs.
(39 kg) |
115V/60 Hz/1Ø/6.4 amps |
929-1260 |
1/3 |
Less than 1000 |
3650-44 |
$ 2,402 |
| 7068700 |
98 lbs.
(44 kg) |
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø |
1073-1456 |
1/2 |
Less than 1000 |
3650-45 |
$ 2,462 |
| 7068900 |
90 lbs.
(41 kg) |
115V/60 Hz/1Ø/6.4 amps |
12.25" OD/
7" d x 13.50" w |
373-569 |
1/3 |
Less than 1000 |
3650-46 |
$ 2,492 |
| 7069100 |
102 lbs.
(46 kg) |
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø |
532-753 |
1/2 |
Between 1000 and 2000 |
3650-47 |
$ 2,589 |
| 7069300 |
108 lbs.
(49) |
115V, 11.4 amps/230V, 5.7 amps/60 Hz/1Ø |
667-946 |
3/4 |
Between 1000 and 2000 |
3650-58 |
$ 2,917 |
| 7069500 |
114 lbs.
(52 kg) |
115V, 13.6 amps/230V, 6.8 amps/60 Hz/1Ø |
828-1173 |
1 |
Between 1000 and 2000 |
3650-59 |
$ 3,181 |
| 7069700 |
114 lbs.
(52 kg) |
230V, 4.8 amps/460V, 2.4 amps/60 Hz/3Ø |
881-1248 |
1 1/2 |
Between 2000 and 3000 |
3650-60 |
$ 3,271 |
| 7071900 |
100 lbs.
(45.5 kg) |
230V, 5.8 amps/
460V, 2.9 amps,60 Hz |
828-1173 |
1 |
Between 1000 and 2000 |
3650-61 |
$ 2,408 |
|
|
| Top of page |
 Moderate to highly corrosive hood applications
|
|
Fiberglass Blowers
- For use with Labconco fume hoods and biosafety cabinets
- Superior corrosion resistance and ideal for moderate to highly corrosive hood applications/conditions; not for use with Perchloric acid
- Low RPM blowers for quiet operation
- Material: Molded fiberglass reinforced polyester housing; impellers made of injection-molded polypropylene; dry powder epoxy-coated base and weather cover provide long life
- Select fiberglass blowers deliver as little as 325 CFM at .12" static pressure or up to 2050 CFM at 4.0" static pressure
- Air circulation through flow-through vent holes and louvers cools and prolongs motor life
- Adjustable sheaves for air volume adjustment
- Bonded impeller reduces maintenance and increases longevity
- Gravity belt tightener self-adjusts for consistent performance and motor mount secures motor in event of belt failure
- Required Accessories: Ductwork
- Flexible installation with variable exhaust adjusting to three outlet positions
- Depending on blower size, sound levels with 10" and 12" diameter inlets range between 64 and 88 decibels
- Manufacturer Warranty: One year parts and labor from date of installation or two years from date of shipment
*Explosion-proof models available with non-sparking polypropylene impellers and explosion proof motors are UL listed for maximum safety.
|
| |
|
Top of page |
| Labconco Part # |
Weight |
Electrical |
Inlet/
Outlet |
RPM
Range |
HP |
CFM Range |
Cat. # |
Price |
| 7180000 |
92 lbs.
(42 kg) |
115V/60 Hz/1Ø/4.0 amps |
10.38" OD Inlet, 10.75" ID Outlet |
630-962 |
1/6 |
Less than 1000 |
3650-86 |
$ 2,370 |
| 7180200 |
92 lbs.
(42 kg) |
115V/60 Hz/1Ø/4.4 amps |
828-1173 |
1/4 |
Less than 1000 |
3646-57 |
$ 2,471 |
| 7180400 |
86 lbs.
(39 KG) |
115V/60 Hz/1Ø/6.1 amps |
1073-1456 |
1/3 |
Less than 1000 |
3650-62 |
$ 2,560 |
| 7180600 |
88 lbs.
(40 kg) |
115V/60 Hz/1Ø/8.4 amps |
1305-1772 |
1/2 |
Less than 1000 |
3650-63 |
$ 2,629 |
| 7180800 |
90 lbs.
(41 kg) |
115V/60 Hz/1Ø/4.0 amps |
12.38" OD Inlet, 12.75" ID Outlet |
373-569 |
1/6 |
Less than 1000 |
3650-64 |
$ 2,629 |
| 7181000 |
96 lbs.
(44 kg) |
115V/60 Hz/1Ø/4.4 amps |
532-753 |
1/4 |
Less than 1000 |
3650-65 |
$ 2,808 |
| 7181200 |
100 lbs.
(45 kg) |
115V/60 Hz/1Ø/8.4 amps |
690-978 |
1/2 |
Between 1000 and 2000 |
3650-66 |
$ 3,669 |
| 7181400 |
100 lbs.
(45 kg) |
115V, 11.6 amps/230V, 5.8 amps/60 Hz/1Ø |
920-1303 |
3/4 |
Between 1000 and 2000 |
3650-67 |
$ 3,779 |
| 7181600 |
114 lbs.
(52 kg) |
115V, 20.4 amps/230V, 10.2 amps/60 Hz/1Ø |
1207-1639 |
1 1/2 |
Between 1000 and 2000 |
3650-68 |
$ 3,937 |
| 7182000 |
290 lbs.
(132 kg) |
208-230V, 6.8 amps/ 460V, 3.4 amps/60 Hz/3Ø |
15.63" OD Inlet, 16" ID Outlet |
1083-1469 |
2 |
Between 2000 and 3000 |
3650-69 |
$ 4,379 |
| 7182200 |
365 lbs.
(166 kg) |
208-230V, 9.7 amps/ 460V, 4.85 amps/60 Hz/3Ø |
1309-1777 |
3 |
Greater than 3000 |
3650-70 |
$ 4,887 |
| Explosion Proof Fiberglass Blowers |
| Labconco Part # |
Weight |
Electrical |
Inlet/
Outlet |
RPM
Range |
HP |
CFM Range |
Cat. # |
Price |
| 7180100 |
92 lbs.
(42 kg) |
115V/60 Hz/1Ø/3.15 amps |
10.38" OD Inlet, 10.75" ID Outlet |
630-962 |
1/6 |
Less than 1000 |
3650-71 |
$ 2,839 |
| 7180300 |
92 lbs.
(42 kg) |
115V/60 Hz/1Ø/4.5 amps |
828-1173 |
1/4 |
Less than 1000 |
3650-73 |
$ 3,202 |
| 7180500 |
86 lbs. (39 KG) |
115V/60 Hz/1Ø/6.4 amps |
1073-1456 |
1/3 |
Less than 1000 |
3650-72 |
$ 3,076 |
| 7180700 |
98 lbs.
(44 kg) |
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø |
1305-1772 |
1/2 |
Less than 1000 |
3650-74 |
$ 3,169 |
| 7180900 |
90 lbs.
(41 kg) |
115V/60 Hz/1Ø/3.15 amps |
12.38" OD Inlet, 12.75" ID Outlet |
373-569 |
1/6 |
Less than 1000 |
3650-75 |
$ 3,262 |
| 7181100 |
102 lbs.
(46 kg) |
115V/60 Hz/1Ø/4.5 amps |
532-753 |
1/4 |
Less than 1000 |
3650-76 |
$ 3,335 |
| 7181300 |
108 lbs.
(49 kg) |
115V, 9.0 amps/230V, 4.5 amps/60 Hz/1Ø |
690-978 |
1/2 |
Between 1000 and 2000 |
3650-77 |
$ 4,172 |
| 7181500 |
114 lbs.
(52 kg) |
115V, 11.4 amps/230V, 5.7 amps/60 Hz/1Ø |
920-1303 |
3/4 |
Between 1000 and 2000 |
3650-78 |
$ 4,298 |
| 7181700 |
114 lbs.
(52 kg) |
230V, 4.8 amps/460V, 2.4 amps/60 Hz/3Ø |
1207-1639 |
1 1/2 |
Between 1000 and 2000 |
3650-79 |
$ 4,448 |
| 7182100 |
345 lbs.
(156 kg) |
208-230V, 6.0 amps/ 460V, 3.0 amps/60 Hz/3Ø |
15.63" OD Inlet, 16" ID Outlet |
1083-1469 |
2 |
Between 2000 and 3000 |
3650-80 |
$ 4,887 |
| 7182300 |
370 lbs.
(168 kg) |
208-230V, 8.4 amps/
460V, 4.2 amps/60 Hz/3Ø |
1309-1777 |
3 |
Greater than 3000 |
3650-81 |
$ 5,289 |
|
|
| Top of page |
SpillStopper Work Surfaces
- For use with Protector ClassMate Hoods
- Available in 4', 5' and 6' nominal widths
- Made with specially formulated corrosion resistant epoxy resins
- Molded to conform into interior liner of Protector ClassMate Laboratory Hoods
- Aerodynamically directs airflow into fume hood with large radius front edge
- Features pre-drilled holes for venting and plumbing passthroughs
- Select models include 6" x 3" cupsink cutouts
- Choose SpillStopper width compatible with your ClassMate hood width
|
Labconco
Part # |
Dimensions |
Cupsink Cutouts |
Shipping Weight
Lbs. (kg) |
Cat. # |
Price |
| 6986400 |
4' w x 25.9" d
(1219.2 x 657.86 mm) |
no cutouts |
110/50 |
3645-81 |
Call TUI |
| 6986401 |
4' w x 25.9" d
(1219.2 x 657.86 mm) |
cupsink cutout, left rear |
110/50 |
3645-82 |
Call TUI |
| 6986402 |
4' w x 25.9" d
(1219.2 x 657.86 mm) |
cupsink cutout, right rear |
110/50 |
3645-83 |
Call TUI |
| 6986403 |
4' w x 25.9" d
(1219.2 x 657.86 mm) |
cupsink cutouts, left and right rear |
110/50 |
3645-84 |
Call TUI |
| 6986500 |
5' w x 25.9" d
(1524 x 657.86 mm) |
no cutouts |
150/68 |
3645-85 |
Call TUI |
| 6986501 |
5' w x 25.9" d
(1524 x 657.86 mm) |
cupsink cutout, left rear |
150/68 |
3645-86 |
Call TUI |
| 6986502 |
5' w x 25.9" d
(1524 x 657.86 mm) |
cupsink cutout, right rear |
150/68 |
3645-87 |
Call TUI |
| 6986503 |
5' w x 25.9" d
(1524 x 657.86 mm) |
cupsink cutouts, left and right rear |
150/68 |
3645-88 |
Call TUI |
| 6986600 |
6' w x 25.9" d
(1828.8 x 657.86 mm) |
no cutouts |
205/93 |
3645-89 |
Call TUI |
| 6986601 |
6' w x 25.9" d
(1828.8 x 657.86 mm) |
cupsink cutout, left rear |
205/93 |
3645-90 |
Call TUI |
| 6986602 |
6' w x 25.9" d
(1828.8 x 657.86 mm) |
cupsink cutout, right rear |
205/93 |
3645-91 |
Call TUI |
| 6986603 |
6' w x 25.9" d
(1828.8 x 657.86 mm) |
cupsink cutouts, left and right rear |
205/93 |
3645-92 |
Call TUI |
|
| Top of page |
|
| Optional Accessories |
Airflow Monitors
| Guardian Airflow Monitors |
| Labconco Part # |
Description |
Electrical |
Cat. # |
Price |
| 9743203 |
Guardian™ 335 Digital Airflow Monitor |
115 volts, 60 Hz |
3645-17 |
Call TUI |
| 9743204 |
Guardian™ Jr. Airflow Monitor |
115 volts, 60 Hz |
3645-18 |
Call TUI |
|
| Guardian™ 335 Digital Airflow Monitor |
|
Guardian>™ Jr. Airflow Monitor |
 |
|
 |
- For use with Protector ClassMate Laboratory Hoods
- Set point from 50 to 250 fpm using velocity meter
- Requires cutout in upper right of ClassMate’s front panel
- Includes: face plate with circuit board, electrical power pack, vinyl tubing, side wall flow tube adapter and wiring instructions
- Senses and alerts user when airflow conditions are low
- LCD displays actual face velocity with color coded alarms lights
- Audible alarm alerts and glows red when face velocity falls below programmed set point
- Mute audible alarm with one touch
- Shipping Weight: 6 lbs. (2.7 kg)
|
|
- For use with Protector ClassMate Laboratory Hoods
- Set point from 30 to 250 fpm using a velocity meter and screwdriver
- Requires cutout in upper right of ClassMate’s front panel
- Includes: face plate with circuit board, electrical power pack, vinyl tubing and airflow tube adapter
- Senses and alerts user when airflow condition are low
- LED lights display color coded alarm in the event sash is raised above maximum opening height
- Audible alarm alerts and glows red when face velocity falls below programmed set point for more than 6 seconds
- Mute audible alarm with “TEST RESET” switch
- Shipping Weight: 6 lbs. (2.7 kg)
|
|
| Top of Page |
Rear Finish Panel Kits
Provides a clean finished appearance on the rear of the Protector ClassMate hood.
Panels are recommended usage on units that are mounted on a casework island.
Kit includes: glacier-white epoxy-coated steel panel.
| Rear Finish Panel Kits |
Labconco
Part # |
Nominal
Width |
Dimensions |
Shipping Weight |
Cat. # |
Price |
| 6987300 |
4 feet |
43" x 9.5"
(1092.2 x 241.3 mm) |
20 lbs. (9 kg) |
3645-19 |
$ 121 |
| 6987301 |
5 feet |
55" x 9.5"
(1397 x 241.3 mm) |
25 lbs. (12 kg) |
3645-20 |
$ 130 |
| 6987302 |
6 feet |
67" x 9.5"
(1701.8 x 241.3 mm) |
30 lbs. (14 kg) |
3645-21 |
$ 142 |
|
Distillation Grid Kits
Recommended when hood is mounted on a casework island.
Kit includes: glacier white epoxy-coated steel panel provides rear of hood a finished appearance.
Labconco
Part # |
Nominal
Width |
Shipping Weight |
Cat. # |
Price |
| 6973300 |
4 feet |
15 lbs. (7 kg) |
3645-22 |
$ 599 |
| 6973301 |
5 feet |
20 lbs. (9 kg) |
3645-23 |
$ 875 |
| 6973302 |
6 feet |
25 lbs. (11 kg) |
3645-24 |
$ 1,163 |
|
|
| Related Products
Entris® Analytical and Precision Balances
CO 7500 Colorwave Educational Colorimeter
myGel™ Mini Electrophoresis System
Utility Carts (Polyolefin)
|
