1. Home
  2. library
  3. Easy Install Pass-Through System

Flush-Mount System Allows Servicing or Replacement without Cleanroom Shutdown!

passthrough replacement steps
Unique quick-mount system allows fast, noncontaminating installation in a finished wall cut-out, regardless of wall thickness
The simplicity of the flush-mount clamping system makes removal of the pass-through chamber just as easy as installation. If the wall cut-out framing is properly sealed prior to installation, the pass-through can be quickly removed and replaced without ever having to shut down the cleanroom. Maintain the positive-pressure differential and protect the cleanroom environment by sealing off the "dirty side" with plastic sheeting prior to removal. Loosen the lag bolt so that the pass-through lifts out of the wall without contaminating the room. Once out, the pass-through can be serviced, modified, or even replaced with an upgraded version to accommodate new applications.
cleanroom passthrough cleaning
A Reducer coupling (welded to inside flush-mount bracket)
B Bolt guide
C Mounting bolt (one, two or three per side, depending on chamber height) - standard sizes accommodate any wall thicknesses
D Clean-side flush-mount bracket
E Mounting bracket
F Bracket cover
G Service panel
H Standard wall (masonry or drywall)
Finish cut-out framing to minimize contamination
exposure during servicing