• Electronic cleanroom passthrough with Smart® Control System provides advanced control and monitoring
• Obstruction free interior, lipless edges, radius corners, continuous welds for strict disinfection
• Quick and easy flush-mount design is hassle-free and installs in under 3 minutes (see video)
• Hidden electronic interlock allows only one door to open at a time to prevent cross-contamination
• Countless add-on capabilities: automatic doors, access security systems, UV disinfection, and more
• Cleanroom pass throughs reduce foot traffic, improve cleanliness, safety, productivity, and much more.
• Chamber Design:
• Designed for sterile, regulated bio-pharmaceutical applications.
• Electronic door interlock allows for unique, custom door swing configurations such as 90 degree corners (L-shape chambers), 3-door designs (T-shape chambers), 4-door designs (X-shape chambers), and more.
• All-316L stainless steel surfaces with enhanced corrosion resistance stand up to harsher cleaning agents and withstand degradation from bleach-based disinfectants.
• Continuous welds with coved radius corners and lip-less edges eliminate hard-to-clean cracks and crevices where contaminants can collect.
• Double-wall construction greatly increases rigidity and durability of the pass through chamber to facilitate installation and prevent warping on larger chambers.
• Flush-mount design removes dust accumulating surfaces inside the cleanroom.
• Floor-mounted design includes removable ramps to support transfer of carts and heavy equipment between controlled spaces.
• Optional dual BioSafe® stainless steel racks easily remove for cleaning or sterilizing and are reversible to allow slide-out motion in either direction.
• WARNING: Not suitable for biological applications.
• Quick and Clean Installation:
• Innovative fastening system clamps to a variety of wall thicknesses without penetrating or damaging the finished surrounding wall.
• The mounting frame is covered on both sides for an easy-to-clean finish with no visible fasteners or screws.
• Easy-to-install mounting system also allows the entire passthrough chamber to be seamlessly removed and reinstalled within minutes, without damaging the surrounding wall.
• Electronic Automatic Door Interlock:
• Hidden Smart® control panel is mounted outside the transfer chamber (between double-wall) for easy-to-clean obstruction-free chamber interior.
• Electronic interlock with Smart® Control System provides visual and audible door status alerts to prevent door damage that results when users exert excess force on an engaged interlock:
• Green light indicates both doors available for use.
• Red light and dual-side remote chimes indicate a door is open and interlock engaged.
• Door Design:
• Access doors with 316L stainless steel reinforced frames extend passthrough chamber's service life and provide a tight seal.
• Doors include one-piece non-adhesive Santoprene® “e”-shape rubber gasket for tight seal to prevent outside air from leaking in; gaskets is non-outgassing and will not take a set or keep an impression.
• Doors are leak-rated by UL for tight seal to maintain cleanroom pressure gradients.
• Heavy-duty stainless steel lift latches included to minimize scratching, corrosion and contamination resulting over time that can occur with chrome-plated latches.
• Heavy-duty stainless steel detachable hinges allow doors to easily lift off for trouble-free replacement or more thorough cleaning/decontamination.
• Order replacement door(s) to avoid critical operation delays should a door be damaged and require immediate replacement.
• Includes:
• (1) Main power cord, to be hardwired to power supply onsite per local code by a licensed electrician.
• (1) Automatic electronic interlock.
• (2) Plug-in chimes (one for each side of the passthrough).
• Mounting bracket system with cover plates. Standard mounting system accommodates 4”-6” wall thickness. Specify wall thickness at time of order.
• (2) Removable ramps to support transfer of carts and heavy equipment between controlled spaces.
The simplicity of this CleanMount clamping system makes removal of the pass-through chamber just as easy as installation. If the wall cut-out framing is properly sealed prior to installation, the pass-through can be quickly removed and replaced without ever having to shut down the cleanroom. Maintain the positive-pressure differential and protect the cleanroom environment by sealing off the "dirty side" with plastic sheeting prior to removal. Loosen the lag bolt so that the pass-through lifts out of the wall without contaminating the room. Once out, the pass-through can be serviced, modified, or even replaced with an upgraded version to accommodate new applications. 
Finish cut-out framing to minimize contamination exposure during servicing Terra's quick-mount system installs in under five minutes, regardless of wall thickness and without contamination
Access Clearances 
