Lab Safety Equipment
Personnel working with medical waste, virulent microbes or hazardous chemicals must wear protective garb and observe application specific safety protocols to avoid detrimental exposure and accidents. Cleanroom labs often utilize lab safety products to detect and monitor hazardous fumes and compounds in the lab environment. Safety showers can be installed in cleanroom labs in the event that toxic or hazardous samples come in contact with personnel. Fume hoods protect workers from potential exposure to toxic or flammable substances and biological safety cabinets contain infectious and high-risk agents. Research labs implement standard operating procedures such as the use of a chemical hygiene plan, chemical monitoring and storage, and the use of personal protective equipment (PPE) depending on the application being performed.
Storage and disposal of chemical and biohazardous materials are other aspects of lab safety. Chemical and flammable storage refrigerators and freezers maintain proper temperatures for hazardous samples. Application specific waste receptacles, especially hands-free models, are important in containing toxic refuse and medical waste in hospital, research, and academic labs. Browse through the comprehensive list of lab safety equipment and supplies listed below to determine which products best suits your lab safety requirements.
These ventilation hoods are economical, with small footprints; available in 47" and 70" widths. They are ideal for tasks requiring a stable air velocity
Compact 30-inch-wide fiberglass-lined hoods are easy to clean, light reflective and fire-resistant. The epoxy-coated steel exterior resists chemicals
High-performance, energy-efficient benchtop hoods safely protect users from harmful gas; even with the sash fully open, no traces escape
An effective containment hood for toxic fumes, this fume hood is also economical and easy to clean; interior is lined with one-piece molded fiberglass
This hood offers a generous working surface, while meeting regulatory requirements for fume containment with a constant flow of clean air
Mount above a work bench; no floor space is required. Stainless steel makes it chemical-resistant, and the baffle system effectively directs air flow
The Wall-Mount Canopy Fume Hood provides effective and economical venting of exhaust fumes. Simply connect the discharge to your in-house ventilation system
Labconco's ductless work station is designed to eliminate air turbulence; specialized filters remove vapors and particulates
Tempered glass tops and side design make this light-duty fume hood ideal for classroom use and low throughput labs; available in three capacity sizes
Flexible hood design and the optional use of filters allow ductless or ducted exhaust of fumes and particles. Work surface is free of vibration
Turnkey hood with fluorescent light is made of acid-resistant polypropylene. It has dual 1200 CFM blowers with fast and easy filter replacement
Be protected from hazardous agents with the Purifier Logic+ Class II A2 BSC; ergonomic and appropriate for Biosafety Level 1, 2 or 3 containment
Discharges 100% of filtered exhaust air from work area via a dedicated exhaust system and remote blower; models need to be hard ducted to the outside
Class III BSC provides maximum safety and ergonomics with negative differential air pressure; 2, 3, or 4 gloveport models with double door airlock, inlet and exhaust Type C HEPA filters.
Safely store your chemical supplies in JUSTRITE cabinets, specifically made for chemicals, corrosives and acids; meet demanding safety requirements!
The Marvel Scientific 6FAR, which fits easily under lab benches and casework, is a 6.1 cubic foot (0.17 m³) flammable material refrigerator
The Marvel Scientific 6EAR, which fits easily under lab benches and casework, is a 6.1 cubic foot (0.17 m³) hazardous location refrigerator
Work more comfortably with these spongy mats that are resistant to microbes and chemicals. Other options include ESD and double-thick
Loose-fitting head-cover respirators provide a steady stream of purified air for contamination situations in cleanrooms and labs
Get real-time, reliable formaldehyde readings by using this handheld meter. Program specifications, and quickly download data via USB
Check filter efficiency: detect and measure hazardous gases and vapors with this easy-to-use, portable system for day-to-day air sampling and analysis
Our enclosed laboratory safety showers provide full-body shower and eye wash station, while shielding the lab from fluid splashes
BioSafe cleanroom waste receptacles come in electropolished stainless steel or polypropylene, & feature hands-free operation for particle control
Fabricated of 304 stainless steel, these economical waste receptacles feature a hands-free foot pedal, and are designed for years of cleanroom service
Hands-free medical waste containers with lid locks are available in 65- and 95-gal. capacities; compatible with all automated lift systems
Sturdy plastic 4.5- to 30-gallon capacities are designed with tight-fitting lids, leak-proof bottoms and quiet pedals for hands-free medical waste collection