1. Home
  2. popups
  3. popups_gloveboxes
  4. Series 200 Options
Close Window

Series 200 Options

Swing-Up Front Access Panel

Allows convenient introduction of large parts into the processing chamber. Cutout size: 20"W x 10"H (508 x 254mm). Other sizes available; specify when ordering. Must be ordered together with affected glove box (Series 100 or 200).


Changeable Sleeve/Glove Combination

These accordion sleeves fit into the ports of Terra’s atmospheric chambers for safe, easy handling of materials. They can be used with a variety of gloves, allowing you to change glove size or type without changing the sleeve itself. Supplied with one pair of nitrile industrial gloves.


port covers

Iris Ports

Self-closing silicone ports allow convenient access to glove boxes without the need for special gloves; the iris opens when you insert hands and closes when you remove them. Easy to install onto standard glove ports—simply slip them into the port from the inside of the glove box.


Detachable Bottom

This feature allows the glove box to be detached from its bottom and lifted for easy placement over large equipment. The bottom attaches and seals to the glove box by means of dual-gasketed latches located along the base.


Dryex™ Gas Dryer

Removes moisture and particulates from compressed air feed.


Nitrogen Generator

Semiporous micromembrane technology yields 99.9% pure nitrogen to ensure an economical, reliable, uninterrupted gas source


Tilt-Up Viewing Window

Swings open for easy access. Dual piston mechanisms hold the window securely open. Price includes modification of Series 100 glove box to include hinged viewing window. Must be ordered together with affected glove box.


Bellows Eyepiece Interface

This cutout is sealed with a bellow-type diaphragm to allow viewing of a stereo microscope positioned inside any of Terra's stainless steel glove boxes. Standard cutout size is 8"W x 6"H (203 x 152mm). Specify desired location or custom size when ordering.


Pic to Come

Stainless Steel Glove Ports

These 8.5" (216mm) ports can be retrofitted onto any existing glove box; requires 8.5"-diameter (216mm) cut-outs. Price includes gasket, mounting hardware and one port.


Glove Box Dual Purge™ System

Provides variable-flow purge control to save nitrogen expenses.

Automatic RB® (Relief/Bleed) Valve

Safeguards glove box against overpressures. Required for operation with Dual Purge System.


Filtration Modules

These modules allow continuous recirculation of process gas through a HEPA or ULPA filter to remove particles, aerosols, microbes, chemical powders, and other fine contaminants. A variety of open/closed-loop configurations allow 100% exhaust, 100% recirculation, or a mixture of filtered and fresh make-up air.

Universal Filter/Blower

This positive pressure system, designed for use on Series 100 Glove Boxes, directs a flow of particle-free air into the glove box. Select HEPA or ULPA filter. Note: Gloves must be removed to allow air to escape the enclosure.

Close Window