Radioisotope Fume Hoods Specifications
Protector Stainless Steel Radioisotope Laboratory Fume Hoods
- Seamless 304 stainless steel baffle and liner
- By-pass air flow and by-pass block
- Clean-Sweep™ sash handle and tracks, Eco-Foil™ air foil and Cord-Keeper™ slots
- 37.5" obstruction free sightline
- Performance tested to ASHRAE 110-1995
- Required Accessories: Remote Blowers, Base Cabinets, Ductwork (See Available Accessories Below)
- One-Year Manufacturer Warranty for Parts and Labor from date of Installation or Two-Year Warranty from Date of Shipment
| Material | Corrosion-resistant 304 stainless steel interior; glacier white, dry powder epoxy-coated steel exterior; black enamel-coated hardboard surface; tempered safety glass vertical-rising sash with frame of epoxy-coated aluminum and PVC |
|---|
| Electrical | 115 volts, 50/60 Hz, 10 amps |
|---|
| Conformance and Listings | - Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL
- Listings: ETL-listed certified to UL 61010-1, UL 1805 and CAN/CSA C22.2 No. 61010.1
- ASHRAE 110-1995 Performance tested
|
|---|
| Type | Benchtop |
|---|
| Required Remote Blower | Not included (sold separately) |
|---|
| Required Accessories | Remote Blowers, Base Cabinets, Ductwork |
|---|
| Optional Accessories | Airflow Monitors, Sash Stops, Rear Finish Panel Kits, Three-Sided Ceiling Enclosure Kits |
|---|
| Airflow | - By-pass airflow for stable face velocities
- By-pass block controls and reduces minimum air volume demanded by obstructing the by-pass opening above the sash
- Eco-Foil air foil saves energy by 7-10% compared to flat air foil; curved air foil maximizes containment by sweeping work surface with air
- Clean-Sweep sash handle and tracks bleeds air into hood chamber and away from breathing zone of operator; saves energy by 7-10% compared to flat air foils
|
|---|
| Construction | - Corrosion-resistant 304 stainless steel baffle and liner
- Tempered safety glass sash
- Seamless interior with coved corners
- Removable front and side panels for easy lamp replacement and access to plumbing and electrical connections
- 37.5" sightline provides unobstructed view from work surface to header panel; ideal for taller operators
- Cord-Keeper slot on left and right side of air foil keeps electrical cords away from operator and allows for complete sash closure when cords are plugged into receptacles on corner posts
- Access to plumbing from front of hood through service access panels
- Pre-wired electrical components: factory wired fluorescent lights and switches at single point junction; each hood factory prepared for up to 4 electrical duplexes and an airflow monitor; models with one electrical duplex with right side receptacle; 8 ft. models with one duplex with receptacles mounted on each side
- Hardboard surface supports integral work surface
- 11" OD Type 304 stainless steel exhaust connection(s)
- Remote control optional color-coded service fixtures for gas, air water, vacuum and other services; can be used regardless of sash position; select models have two pre-plumbed service fixtures; each corner post factory prepared for up to 4 service fixtures (8 fixtures per hood). Talk to a Terra product specialist about additional service fixtures
|
|---|
| Lighting | Two high-efficiency T8 fluorescent lights outside hood interior for easy replacement and corrosion protection |
|---|
