CleanMount™ Design Allows Servicing or Replacement without Cleanroom Shutdown!
The simplicity of this CleanMount clamping system makes removal of the pass-through chamber just as easy as installation. If the wall cut-out framing is properly sealed prior to installation, the pass-through can be quickly removed and replaced without ever having to shut down the cleanroom. Maintain the positive-pressure differential and protect the cleanroom environment by sealing off the "dirty side" with plastic sheeting prior to removal. Loosen the lag bolt so that the pass-through lifts out of the wall without contaminating the room. Once out, the pass-through can be serviced, modified, or even replaced with an upgraded version to accommodate new applications. A
- Inside of flush-mount bracket on opposing side B
- Bolt guide extending from nut welded to opposing bracket C
- Mounting bolt (one, two or three per side, depending on chamber height) - standard sizes accommodate any wall thicknesses D
- Mounting bracket E
- Bracket cover F
- Standard wall (masonry or drywall)