Scrub Air Pipette Washer and Dryer by Labconco

Additional Features of ScrubAir Pipette Washers/Dryers by Labconco

  • Compressed air and water scrubs interior walls while water and detergent cascade down outside walls
  • Eco-friendly and saves water by using only 12.5 liters of tap/pure water; adds up to a savings of $2900 or more
  • Fast washing and drying power reduces need for pipette inventory
  • Feedwater inlet/drain hose, 6.0' (1.8 m), with quick connect hose coupling and two aerator adapters for connection to standard 55/64-27 male or 15/16-27 female lab faucets
  • Portable unit can be hooked to a sink faucet; easy to transport when placed on a cart
  • MENU button selects and programs wash cycles and diagnostic testing
  • SELECT button sets wash, rinse, dry cycle times and number of rinses and for diagnostic testing
  • LCD displays cycle segment and remaining time
  • Three factory-set cycle programs: STANDARD, USER 1 and USER 2
User-modifiable settings:
  • Wash time from 0 – 8 hours in 1 minute increments
  • Rinse time for 0 – 4 hours in 1-minute increments
  • Total number of rinses from 0 – 10
  • Dry time from 0 – 8 hours in 1-minute increments
Requirements
  • Tap/pure feedwater with 3/8" OD (minimum) water line
  • Recommended minimum fill water temperature: 49° C (120° F)
  • Maximum fill water temperature 60° C (140° F)
  • Water consumption per fill 0.46 gallon (1.75 liters) to 0.7 gallon (2.5 liters)
  • Min./Max. feedwater pressure: 8 psi (55 kPa)/ 120 psi (827 kPa)
  • Regulated compressed air with 3/8" OD air line
  • Minimum feed airflow/pressure: 5 CFM (142 l/m) 20 psi (138 kPa)
  • Maximum feed air pressure: 100 psi (689 kPA)
  • Drain plumbing 1.25" (3.2 cm) ID or larger
  • Liquid detergent (LabSolutions Liquid Detergent recommended)