Vacuum Chambers

11 products meet your criteria.

per page
  1. Acrylic Vacuum Chambers with Removable Top Lids
    Acrylic Vacuum Chambers with Removable Top Lids
    Some ship in 1 - 3 days
    10 Chamber Width10 Chamber Depth10 Chamber Height

    • Supports full vacuum to 29.9" Hg
    • Fabricated of transparent 1" thick acrylic
    • O-ring inlaid in precision-routed channel, helps ensure uniform and ultra-low leak rate
    • Stainless steel draw latches and inlaid O-ring provide clean, leak-tight operation
    Chamber Width: 30", 11", 7", 23", 12", 10", 14", 16", 18", 20"
    Chamber Depth: 30", 11", 7", 8.25", 12", 10", 14", 16", 18", 20"
    Chamber Height: 4", 5.5", 7.5", 10.5", 12", 10", 14", 16", 18", 20"
  2. Vacuum Desiccator Cabinets
    Vacuum Desiccator Cabinets
    Some ship in 1 - 3 days
    1 Material4 Chamber Width4 Chamber Depth6 Chamber Height1 Lid Type

    • Acrylic vacuum desiccator cabinet with 1" thick walls supports full vacuum to 29.9" Hg
    • Spacious vacuum chambers with front-swing doors allow for quick access and easy transfer of parts
    • Removable and adjustable shelf system allows for faster batch processing of smaller parts
    • Units individually tested to hold full vacuum 29.9"Hg with no detectable change for 72 hours
    • Customizable with feedthroughs for electrical connections inside vacuum chamber
    Material: Acrylic
    Chamber Width: 30", 11.5", 16.625", 22.125"
    Chamber Depth: 30", 10", 17.5", 23.5"
    Chamber Height: 4", 11.5", 8", 16", 20", 10"
    Lid Type: Front Swinging
Page 1 of 1

11 products meet your criteria.

per page

Vacuum Chambers by Terra Universal

Vacuum Desiccator Cabinet with Front Swing Door and Adjustable Shelves

Terra’s acrylic vacuum desiccator cabinet with front-swinging door allows for quick access and easy transfer of parts. Optional removable shelf systems increase storage capacity for faster batch processing.

Multi-pin Feedthrough

Optional 25-pin connector can be used to monitor conditions within the vacuum chamber.

Coaxial SMA Feedthrough

Double-ended, 50-ohm connectors allow small electronics to operate within the chamber.

Precision Vacuum Gauge and Needle Valves

A vacuum gauge and two precision needle valves included with vacuum chambers allow for exact application, monitoring, backfill, and bleeding of vacuum pressure in increments of ~1" Hg (~3% vacuum). The hardware is mounted over an extra layer of acrylic to prevent damage to the lid while the chamber is under maximum vacuum.

Optional Glass Top for Sensitive Optics

0.75"-thick tempered-glass top allows optical testing and monitoring that requires high clarity.

Tested to Hold Full Vacuum for 72 hours

Terra's acrylic vacuum chambers are tested to hold 29.9"Hg (99.9% vacuum) with no detectable change over a 72 hour duration. Heavy-duty one-inch-thick walls ensure chamber integrity and protect against cracking.

Extra Wide Acrylic Vacuum Chamber with Hinged Front Door

Acrylic vacuum chamber with extra wide mouth and hinged door lets you easily feed long parts through for speedy and hassle-free transfer.

Inlaid Rubber O-Ring for Uniform Seal

Precision-routed channel and inlaid rubber O-ring ensures a uniform seal around the lid of your vacuum chamber. The O-ring is also removable in case it needs to be replaced.

PC-Based Vacuum Control with Data Logging

The eVAC Digital Vacuum Controller provides highly flexible control over vacuum levels by incorporating an electronically activated bleed valve, which adds the capability to reduce the applied vacuum.

Vacuum Chamber on Electric Height Adjusting Table

Electric height adjusting tables help easily position extremely heavy vacuum chambers to the right height to allow transfer of materials, or observe tests within the chamber.

Vacuum Chambers

  • Terra Universal Vacuum Chamber Overview

Can't find what you're looking for?
Tell us what you need and we'll build it!


Need Help?

(714) 578-6100


Mon - Fri, 5:30am - 5:30pm PST

You need at least 2 products to compare Compare Clear All
Compare Products