Vacuum Chambers

18 products meet your criteria.

per page
  1. Stocked
    eVAC™ Altitude Simulation Control Module (5235-45)
    Usually ships in 1 - 3 days

  2. Stocked
    Acrylic Vacuum Chambers with Removable Top Lids
    Some ship in 0 - 2 days
    StockedStockedISO 6 IconISO 6 Icon
    1 Type9 Chamber Width9 Chamber Depth9 Chamber Height1 ISO Class

    • ISO Rating: ISO 6, ISO 7, ISO 8
    • Supports full vacuum to 29.9" Hg
    • Fabricated of transparent 1" thick acrylic
    • O-ring inlaid in precision-routed channel, helps ensure uniform and ultra-low leak rate
    • Stainless steel draw latches and inlaid O-ring provide clean, leak-tight operation
    Type: Benchtop
    Chamber Width: 30", 7", 23", 12", 10", 14", 16", 18", 20"
    Chamber Depth: 30", 7", 8.25", 12", 10", 14", 16", 18", 20"
    Chamber Height: 4", 7.5", 10.5", 12", 10", 14", 16", 18", 20"
    ISO Class: ISO 6
  3. Stocked
    Adjust-A-Shelf™ Vacuum Desiccator Cabinets
    Some ship in 0 - 2 days
    StockedStockedISO 6 IconISO 6 Icon
    1 Material5 Chamber Width4 Chamber Depth6 Chamber Height1 ISO Class1 Lid Type

    • ISO Rating: ISO 6, ISO 7, ISO 8
    • Acrylic vacuum desiccator cabinet with 1" thick walls supports full vacuum to 29.9" Hg
    • Spacious vacuum chambers with front-swing doors allow for quick access and easy transfer of parts
    • Removable and adjustable shelf system allows for faster batch processing of smaller parts
    • Units individually tested to hold full vacuum 29.9"Hg with no detectable change for 72 hours
    • Customizable with feedthroughs for electrical connections inside vacuum chamber
    Material: Acrylic
    Chamber Width: 30", 11.5", 16.875", 22.125", 22.375"
    Chamber Depth: 30", 10", 17.5", 23.5"
    Chamber Height: 4", 11.5", 8", 16", 20", 10"
    ISO Class: ISO 6
    Lid Type: Front Swinging
  4. Stocked
    Stainless Steel Vacuum Chambers
    Some ship in 0 - 2 days
    StockedStockedISO 5 IconISO 5 Icon
    2 Type2 Chamber Width2 Chamber Depth2 Chamber Height1 ISO Class

    • ISO Rating: ISO 5, ISO 6, ISO 7, ISO 8
    • Durable double-wall stainless steel vacuum chamber supports full vacuum to 29.9" Hg
    • Ideal for contamination-sensitive applications: won't permeate or outgas like acrylic designs
    • Versatile stainless steel construction is chemical resistant, heat resistant, and ESD-safe
    • Light-weight sheet metal design simplifies transporting parts under vacuum between workstations
    Type: High Capacity, Benchtop
    Chamber Width: 27", 8"
    Chamber Depth: 48", 8"
    Chamber Height: 24", 12"
    ISO Class: ISO 5
  5. ISO 5 IconISO 5 Icon
    2 Type6 Chamber Width6 Chamber Depth5 Chamber Height1 ISO Class

    • ISO Rating: ISO 5, ISO 6, ISO 7, ISO 8
    • Provide an optimal environment for vacuum testing and processing to one atmosphere 29.9" Hg
    • All chambers include two preinstalled mini ball valves and a 0 - 30" Hg vacuum gauge
    • Benchtop units as small as 9" x 9" x 9.5"
    • Floor-standing units as large as 37" x 37" x 37.5"
    Type: High Capacity, Benchtop
    Chamber Width: 29.375", 30", 35", 11", 8", 16"
    Chamber Depth: 23.375", 30", 35", 10", 8", 16"
    Chamber Height: 16.75", 40", 35.5", 8.5", 12.5"
    ISO Class: ISO 5
  6. Stocked
    Vacuum Control Module
    Some ship in 0 - 2 days
    2 Voltage1 Type1 Data Logging

    • Controls pump operation to maintain a preset vacuum level (to 800 torr) in a remote vacuum chamber
    • Especially important in testing or processing applications that require sustained exposure to a precisely regulated vacuum level
    • Extends the service life of your vacuum pump by allowing continuous operation
    • Repeated starts and stops, especially under existing vacuum pressure, can lead to back streaming of pump oil into the vacuum line, resulting in contamination and premature pump failure
    • Eliminates this problem by switching an optional solenoid vacuum valve on and off, which in turn controls vacuum pressure in the processing chamber
    Voltage: 120 V, 240 V
    Type: Controller
    Data Logging: No
Page 1 of 1

18 products meet your criteria.

per page

Vacuum Chambers by Terra Universal

Vacuum Desiccator Cabinet with Front Swing Door and Adjustable Shelves

Terra’s acrylic vacuum desiccator cabinet with front-swinging door allows for quick access and easy transfer of parts. Optional removable shelf systems increase storage capacity for faster batch processing.

Multi-pin Feedthrough

Optional 25-pin connector can be used to monitor conditions within the vacuum chamber.

Coaxial SMA Feedthrough

Double-ended, 50-ohm connectors allow small electronics to operate within the chamber.

Precision Vacuum Gauge and Needle Valves

Vacuum chambers can be customized to include precision needle valves for exact application, monitoring, backfill, and bleeding of vacuum pressure in increments of ~1" Hg (~3% vacuum). The hardware is mounted over an extra layer of acrylic to prevent damage to the lid while the chamber is under maximum vacuum.

Optional Glass Top for Sensitive Optics

0.75"-thick tempered-glass top allows optical testing and monitoring that requires high clarity.

Tested to Hold Full Vacuum for 72 hours

Terra's acrylic vacuum chambers are tested to hold 29.9"Hg (99.9% vacuum) with no detectable change over a 72 hour duration. Heavy-duty one-inch-thick walls ensure chamber integrity and protect against cracking.

Extra Wide Acrylic Vacuum Chamber with Hinged Front Door

Acrylic vacuum chamber with extra wide mouth and hinged door lets you easily feed long parts through for speedy and hassle-free transfer.

Inlaid Rubber O-Ring for Uniform Seal

Precision-routed channel and inlaid rubber O-ring ensures a uniform seal around the lid of your vacuum chamber. The O-ring is also removable in case it needs to be replaced.

PC-Based Vacuum Control with Data Logging

The eVAC Digital Vacuum Controller provides highly flexible control over vacuum levels by incorporating an electronically activated bleed valve, which adds the capability to reduce the applied vacuum.

Vacuum Chamber on Electric Height Adjusting Table

Electric height adjusting tables help easily position extremely heavy vacuum chambers to the right height to allow transfer of materials, or observe tests within the chamber.

Vacuum Chambers

  • Terra Universal Vacuum Chamber Overview

Can't find what you're looking for?
Tell us what you need and we'll build it!


Need Help?

(714) 578-6100


Mon - Fri, 5:30am - 5:30pm PST

You need at least 2 products to compare Compare Clear All
Compare Products