CleanMount design allows for installation without drilling and prevents cleanroom shutdown for rapid servicing or replacement
Hidden automatic door interlock allows only one door to open at a time to prevent cross-contamination
Lift-off hinges allow doors to be easily removed for more thorough cleaning
Cleanroom pass throughs reduce foot traffic, improve cleanliness, safety, productivity, and much more.
Chamber Design:
All 304 or 316 stainless steel surfaces with enhanced corrosion resistance stand up to harsher cleaning agents and withstand degradation from bleach-based disinfectants.
Continuous welds with coved radius corners and lip-less edges eliminate hard-to-clean cracks and crevices where contaminants can collect.
Double-wall construction greatly increases rigidity and durability of the pass through chamber to facilitate installation and prevent warping on larger chambers.
Flush-mount design removes dust accumulating surfaces inside the cleanroom.
Floor-mounted design includes removable ramps to support transfer of carts and heavy equipment between controlled spaces.
Optional dual BioSafe® stainless steel racks easily remove for cleaning or sterilizing and are reversible to allow slide-out motion in either direction.
Quick and Clean Installation:
Innovative fastening system clamps to a variety of wall thicknesses without penetrating or damaging the finished surrounding wall.
The mounting frame is covered on both sides for an easy-to-clean finish with no visible fasteners or screws.
Easy-to-install mounting system also allows the entire passthrough chamber to be seamlessly removed and reinstalled within minutes, without damaging the surrounding wall.
Hidden Automatic Door Interlock:
Hidden Interlock mechanism is mounted outside the transfer chamber (between double-wall) for easy-to-clean obstruction-free chamber interior.
Rugged and reliable CleanMount® mechanical interlock uses rigid stainless steel rods that run through the door and firmly lock into the lift latches.
Door Design:
Built with a BioSafe® glass door, combining chemical resistance with unobstructed visibility.
Access doors with 316 stainless steel hinges extend passthrough chamber's service life and provide a tight seal.
Composed of a single piece of tempered glass, the doors feature an unobstructed view of the chamber interior and opposite side in a stylish, contemporary design.
Pivoted stainless steel latch arm with ergonomic large round knob rotates in and out of locked position.
Hinges and latch arm are easily detachable to allow door to be easily cleaned, maintained, or replaced.
Includes:
(1) Automatic mechanical interlock.
(2) Removable ramps to support transfer of carts and heavy equipment between controlled spaces.
Mounting bracket system with cover plates. Standard mounting system accommodates 4"-6" wall thickness. Specify wall thickness at time of order.
Standard sized sloping top included for optional use on dirty side of pass-through. Accommodates wall thickness up to 5-1/2". If slope top is required for greater wall thickness, custom slope top to be ordered separately. Can be installed onto existing pass-through units.
Specifications
• Inside Depth: 24"
• Inside Height: 48"
• Inside Width: 24"
• Concealed Interlock: Yes
• Continuous-Seam Welds: Yes
• Electropolished: Optional
• Expand System Capabilities: UV Sanitizer, Electronic Pass-Through Upgrade, LED Lighting, Access Control System, Automatic Door, ULPA Air Shower, Intercom, Iris Scanner, Keycard Reader, Fingerprint Scanner, Video Recording, Power Outlet, Load Presence Sensor, Message Panel, Air Speed Sensor, Access Panel
• HEPA/ULPA Filtration: No
• Material: 304 or 316 SS
• Model: CleanMount® CleanSeam™
• Mounting Position: Flush Floor
• Special Door Configuration: Leak-Rated
• Storage Racks: Optional
• Window Material: PVC
• Unit of Measure: EA
• Dimensions, Product: 34.5" W x 25" D x 49.74" H
• Dimensions, Shipping: 43" W x 31.5" D x 59.74" H
• Marks & Listings: CE, UL, ULC
• Package Type: Palletized
• Weight, Product: 116.78 lb
• Weight, Shipping: 302.28 lb
Features and Benefits
Retrofittable on Existing Units
Slope tops for double wall pass-throughs can be installed onto new or existing units. Designed for rapid installation without penetrating the chamber. Now comes standard on certain models
Products Tailored to Your Cleanroom Environment
Provide Terra with your desired ISO Grade design. We will tailor the product to meet your criteria and certify it with a report appended to your invoice. Certificate includes all the necessary information to streamline audits and facility compliance.
Popular Accessories
For a full list of accessories, select a product then click Choose Accessories on that product page.
Designed to be installed into any pass through. Install these racks within minutes with no special tools. Simply tighten a compression screw. Forgot to order racks before? No problem!
Adding a duct flange to the top of the passthrough allows the chamber to be ventilated by a remote blower. The ULPA-filtered inlet, housed in a perforated stainless steel cage, provides the necessary make-up air without contaminating the chamber.
Video Camera
Interior HD video camera records continuously or upon door-opening; can also be used for remote monitoring the transfer chamber.
Infrared beams detect objects placed inside the transfer chamber and connect to a remote alarm located up to 200 feet away from the pass through chamber. The crossed red lines depict the non-visible trigger lines between the IR transmitters and receivers.
Provides a timed cycle of 254 nm Ultra-Violet (UV) radiation to neutralize bacteria, viruses and mold spores within line-of-sight of the light fixture.
Prevent operator damage! A green light bar indicates the door is available for use, with the electronic interlock disengaged. The bar turns red when the opposing door is open to indicate the electronic interlock is engaged.
Wireless Door Alert
Alarm bell rings when its assigned door is open (two bells per chamber); plugs into a standard wall outlet.
304 Stainless Steel Sliding Tray for Cleanroom Pass Through
Securely hold small parts during transfer with this dual-motion sliding tray in corrosion-resistant 304 stainless steel. Tray attaches to sliding runners inside a pass-through to allow full tray extension in both directions for convenient material handling.
Copyright 1999 - 2026 Terra Universal. Inc. All rights reserved.
