• ISO 7
  • Smart® gas-purge glove box automates low-humidity control down to 0% RH
  • Ideal for moisture-sensitive materials: microelectronics, medical devices, pharmaceutical powders
  • Gas control system auto-adjusts nitrogen purge to maintain sub-ambient humidity set point
  • Fast-acting and economical; maintains below 10% RH with 78% less nitrogen than manual flow meter
  • Fully integrated turnkey system takes only a few minutes to install and program
  • Smart® controlled atmosphere glove box isolator features automated RH control that toggles nitrogen inflow (binary on/off) for fast setpoint response.
  • Mini LED display and built-in RH sensor simplifies installation. Operation requires only one gas line, one low voltage power connection, and a pair of gloves.
  • UL-listed Smart® control module is designed and built to the highest standards required by defense and semiconductor industries for long-term reliability and protection against damage, injuries, and electrical hazards.
  • Chamber Design:
  • NOTE: ESD-sensitive applications: grounding is not standard, choose static-control options to protect sensitive materials against ESD.
  • Low cost acrylic offers durability (17x impact resistance of glass), superior clarity, and UV resistance (won't yellow from exposure to sun).
  • CAUTION: Acrylic is damaged by alcohol and many other cleaning agents.
  • Innovative wall fusing technology with continuous seams bonds walls together into a single rigid enclosure for easy cleaning and maximum protection against chemical splashes and spills.
  • Removable back wall allows transfer of large process equipment that can't fit through openings.
  • Access doors mounted on left and right side feature stainless steel frames and hardware to increase structural rigidity for a longer service life.
  • Santoprene® “e”-shape non-outgassing rubber gasket installed to door frames firmly compresses for a tighter seal. Resilient rubber maintains its shape after compression and won't flatten, warp, crack, or degrade like ordinary foam gasket. Gasket is also mechanically attached to the door frame to avoid adhesive failure common with gasket tapes.
  • Round ABS plastic glove ports provide a wide range of motion, and compatibility with numerous glove types. ABS Plastic offers excellent tensile strength and stiffness. Resists heat, most oils, acids, and alkalis.
  • Automatic relief/bleed (RB) valves continuously bleed off excess internal gas in only one direction. Helps maintain a slight positive pressure inside the glove box without allowing contaminants inside.
  • Requires gloves (sold separately): available as one-piece, fully dipped gloves or two-piece glove and sleeve combinations with Glove-Under-Sleeve (GUS) connectors to allow fast, inexpensive glove replacement.
  • Optional Accessories:
  • Inert gas airlock: minimize nitrogen loss and contamination inflow when materials are passed through the glove box. The airlock is connected to an inert gas line to purge out ambient air before the inside door is opened to allow materials to transfer into or out of the main chamber.
  • Nitrogen generator: provides a continuous, reliable supply of pure, dry nitrogen to eliminate dependence on bulky canisters.
  • ErgoHeight™ automatic height adjusting table: perfect for workstations holding heavy or fragile equipment that require frequent height adjustment.
  • NOTE: Glove box is designed for positive-pressure operation and is therefore not tested as a hermetically sealed chamber, and is not designed for containment of hazardous materials.


Material Type: Plastic

Model: Smart® Glovebox

Number of Glove Ports: 2

Window Material: N/A

Chamber Material: Acrylic

Chamber Width: 25.5"

Chamber Depth: 19.5"

Chamber Height: 17.5"

Chamber Dimensions: 25.5" W x 19.5" D x 17.5" H

Maximum Working Height: 17.5"

Airlock Opening: 10" W x 10" H

Unit of Measure: EA


Marks & Listings: CE

Electrical Specifications: 120/240 V, 0.5 A, 50/60 Hz

Weight, Product: 66 lb

Dimensions, Product: 26" W x 20" D x 18" H

Weight, Shipping: 129 lb

Dimensions, Shipping: 32" W x 26" D x 26" H

Package Type: Crate

Smart® Controlled Atmosphere Glove Box Isolators

  • Acrylic Smart Glovebox with Air Lock Polycarbonate Smart Glovebox
  • Smart Glove Box Set-up
  • Polypropylene Smart Glovebox with Gloves Polypropylene Smart Glovebox
  • Polypropylene Smart Glovebox with Air Lock Polypropylene Smart Glovebox and Air Lock
  • Stainless Steel Smart Glovebox with Air Lock Stainless Steel Smart Glovebox with Air lock
  • Acrylic inert gas glove box isolator for moisture-sensitive materials Acrylic Inert Glove Box for Moisture-Sensitive Materials
  • Plastic Smart Glovebox with Air Lock Acrylic Smart Glovebox with Air Lock
  • Single Stainless Steel Glovebox Front View Stainless Steel Smart Glovebox
  • Smart GloveBox Stainless Steel Smart GloveBox Stainless Steel

Features and Benefits

Automatic Nitrogen-Purged Stainless Steel Glove Box for Inert Environment

Terra’s Smart® glove box includes a nitrogen control module that maintains a low-humidity set point to protect oxygen- and moisture-sensitive parts; takes only seconds to program. An optional inert gas airlock minimizes nitrogen loss and contamination inflow from materials transferred through the glovebox.

Stainless Steel Inert Glove Box for Medical Devices

Smart® stainless steel glovebox is suitable for heavy-duty, sterile, and ESD-safe applications. CleanSeam™ design features fully-welded single piece enclosure with smooth and seamless interiors to eliminate hard-to-clean cracks and crevices that can harbor contaminants.

Acrylic Inert Glove Box for Moisture-Sensitive Materials

Smart® plastic glove box isolator with low cost Plexiglass acrylic offers durability (17x impact resistance of glass), superior clarity, and UV resistance (won't yellow from exposure to sun).

Polypropylene Inert Glove Box for Corrosive Chemicals

Smart® automatic inert glove box isolator with opaque white polypropylene offers the best resistance to a wide range of corrosive acids, solvents, and disinfectants. The solid frame and walls feature continuous-seam welds for easy cleaning and maximum protection against chemical splashes and spills.

ESD-Safe Inert Glove Box for Microelectronics

Static-dissipative PVC (SD-PVC) construction dissipates electro-static charges and eliminates static-cling of dust particles to help maintain clean surfaces. Bonded dissipative layers resist abrasion and retains surface resistivity of 106 - 108 ohms/square longer than spray-on coatings that can wear off after a few years. Easy to clean with increased chemical resistance to isopropyl alcohol and other cleaning agents.

Polycarbonate Inert Glove Box for Pharmaceutical Packaging

Smart® inert glove box isolator with Lexan polycarbonate offers visual clarity plus several benefits over acrylic. Superior durability cracks less easily with 250x the impact resistance of glass, 15x the impact resistance of acrylic. Chemical resistant formula withstands many cleaning agents such as isopropyl alcohol. Increased thermal resistance (115–130 °C / 239–266 °F) helps withstand repeated steam sterilization.

UL-Listed Smart® Module for Long-Term Reliability

The Smart® module is UL-listed and built to the highest standards required by defense and semiconductor industries for long-term reliability. The compact controller includes an LED display and sensor to eliminate the need for external control boxes. Installation is simple, requiring only one gas and one low voltage power connection.

External Fluorescent Illuminator

Light fixture mounted outside the glovebox illuminates the interior and is easy to access. The hinged cover lifts up for light bulb maintenance or replacement.

High Caliber Hardware

Seemingly small details like latches, ports, glides and hinges are often overlooked or ignored by other manufacturers, and later become the point of costly recurring maintenance or equipment failure. Terra’s products are made of long lasting, cleanroom compatible, top tier hardware. Individual components are carefully designed and rigorously tested to guarantee the highest quality, durability, and craftsmanship.

Continuous Product Improvement

At Terra, we strive to develop and produce the highest quality products for our customers to improve health, safety, performance, and yields. Our product quality is enabled by high-grade manufacturing equipment and processes, 45 years of engineering and application expertise, and our commitment to continuously improve.

Manufacturer, Distributor and Service Provider

Terra is not just a product manufacturer, we provide a suite of services to help our customers navigate the complex process of ensuring their equipment is operational

Catalog of CE-Marked Products

Terra offers over 1,700 CE-marked products configured for international voltage requirements
Popular Accessories
For a full list of accessories, select a product then click Choose Accessories on that product page.
  • Stainless Steel Glovebox on Automatic Height Adjusting Table with N2 Generator

    Gloveboxes can easily mount to an automatic height adjusting table (28”-43”H). Ideal for workstations with sensitive equipment that undergo frequent height adjustment. A compact Nitrogen generator requires only a compressed air supply for continued nitrogen gas supply.
  • Sleeve and Glove Assemblies

    Sleeve/glove combinations, available in many materials, allow fast, inexpensive glove replacement without removing sleeves from the glove box port (shown: Hypalon with glove/sleeve connectors).
  • Laboratory Nitrogen Generator

    Terra’s Nitrogen Generators provide a continuous, reliable supply of clean, dry nitrogen up to 99% pure to eliminate dependence on bulky canisters to operate desiccators and glove boxes.
  • Air Locks Minimize Cross-Contamination

    Air locks provide a buffer space that minimizes cross-contamination and moisture fluctuation during parts transfer; standard mounting is right side (static-dissipative PVC model shown).
  • Stainless Steel Work Surface Improves Safety and Service Life

    Installed inside on the floor of a plastic glove box, a conductive stainless steel surface improves ESD-safety, simplifies cleaning, and extends service life by protecting from scratches and heavy impacts of dropped items.
  • Ionizing Module for Glove Boxes

    Safe, low-voltage static-neutralizing unit includes fans to eliminate static charges throughout the glove box chamber to prevent electro-static discharge (ESD) and particle attraction
Other products you may find relevant
  1. Modular Three Drawer Unit; Stainless Steel 6"H, 6"H & 6"H | 1741-24 displayed
    Some ship in %s days
    Modular Work Station Drawers
  2. Provides a visual self-check to enhance compliance with gowning protocol | 5252-74 displayed
    Some ship in %s days
    BioSafe® Cleanroom Mirrors with Integrated LED
  3. Bellows eyepiece for microscopes | 1681-53 displayed
    Usually Ships in 1 - 3 days
    Bellows-Type Microscope Eyepiece Interface
  4. Universal Tool Kit allows accurate dressing, tuning and other manipulation of wire bonds, gold ribbon and other microelectronic components | 9300-35 displayed
    Usually Ships in 1 - 3 days
    Tool Kit, Universal
  5. Sno Gun II high-precision handheld dry ice cleaner removes contaminants without residue | 4545-00A displayed
    Usually Ships in 8 - 14 days
    Dry Ice Cleaner; Sno Gun II, Va-Tran Systems, Inc.
  6. Stores 16,382 temperature readings and 16,382 relative humidity measurements. | 9500-10 displayed
    Usually Ships in 0 - 2 days
    Data Logger; Relative Humidity/Temperature
  7. Stackable portable plastic desiccator dry box chambers maintain clean, dry environment during parts transit | 9302-20B displayed
    Some ship in %s days
    Portable Desiccator Dry Boxes
  8. Polished manual diamond tips scribe fine lines on most metals, glass, & other materials | 1015-04 displayed
    Some ship in %s days
    Manual Diamond Scribers
  9. Single gauge wire bond strength tester for 4-35 grams | 9104-00A displayed
    Some ship in %s days
    Portable Wire-Bond Strength Tester
  10. Yellow Slimline safety cabinets by Justrite are fire resistant double wall, air insulated and welded steel construction | 1619-90 displayed
    Some ship in %s days
    Yellow Slimline Safety Cabinets by Justrite
  11. Corrosive Storage by Justrite features two manual stainless steel doors with 3-point stainless steel bullet latching system | 2820-09A displayed
    Some ship in %s days
    Corrosive Storage Cabinets by Justrite
  12. Ion bar kit safely neutralizes charges to protect against electro-static charges. Attaches to inside ceiling of glovebox. Ion bar sold separately. | 2005-92 displayed
    Some ship in %s days
    Ionizing Bars
  13. This Ionizing Blow-off Gun neutralizes static surface charges and removes particles with a burst of clean air or nitrogen | 2005-55 displayed
    Some ship in %s days
    Cleanroom Ionizing Blow-Off Gun
  14. Soft, durable wipes gently clean and polish scratch-sensitive optics or magnetic disk media surfaces | 5605-07 displayed
    Some ship in %s days
    Cleanroom and Laboratory Wipes from Valutek
  15. Different size membrane Nitrogen generator options are available to meet your N2 gas supply needs
    Some ship in %s days
    Nitrogen Gas Generators
  16. Designed to provide reliable gas drying without the hassle and expense | 9082-01 displayed
    Some ship in %s days
    Dryex Gas Dryer
  17. 10"-diameter convertible glove ports accept iris port adapters and port covers for versatile use | 1694-52 displayed
    Some ship in %s days
    Glove Ports
  18. Plexiglass microscope breath shield, 11" x 11", protects microscope samples against contaminants more effectively than face masks | 1600-25 displayed
    Some ship in %s days
    Sneeze Guard™ Microscope Breath Shields
Copyright 1999 - 2022 Terra Universal. Inc. All rights reserved.
You need at least 2 products to compare Compare Clear All
Compare Products