Product Details
- Available ISO Ratings: ISO 4, ISO 5, ISO 6, ISO 7, ISO 8
- Exhaust flow fan filter unit convert any room into a negative pressure isolation/containment room
- Explosion-proof FFU meets NEC requirements for Class I/Class II, Division 1 Hazardous locations
- Non-sparking motor, mounted in a cast-iron, explosion-proof housing
- Mounts into ceiling bay to remove sub-micron particles and provide safe exhaust
- Explosion-Proof Design:
- Explosion-proof motor meets NEC requirement for Class I Group C and D, Class II Group F and G, Division 1 hazardous locations.
- All wiring embedded in filled, rigid conduit in accordance with Class I/II requirements.
- NOTE: Proper installation of explosion proof equipment is critical to maintaining the explosion-proof protection aspects of the system. Customer must hard wire the motor/ffu in correlation to their specified voltage at time of installation. Therefore all wiring for explosion proof systems should be done in the field per local code by a licensed electrician.
- FFU Design:
- All-304 stainless steel BioSafe® housing, baffle plate, filter face grille, and filter frame ensure optimal cleanliness and stand up to alcohol and other cleaning agents.
- Internal baffling plate and diffuser panel provide quiet uniform air flow across the filter face.
- FDA-approved silicone sealant without harmful chemicals seals inside housing to prevent air leakage (specify acrylic urethane or other required sealant type when FFU is ordered).
- ULPA Filter: 99.999% efficient Ultra-Low Penetration Air, rated at particles 0.12µm diameter, shipped uninstalled to prevent damage during shipping.
- Medical grade filters are leak tested in accordance with IEST standards and meet UL 900.
- See performance data and submittal sheets for additional information.
- NOTE: Because filters are delicate and subject to damage during handling, all filter sales are final; no returns can be accepted.
- Optional Accessories:
- Stainless steel surface mount frame for installing FFU in ceiling without T-grid.
- Replacement filters.
- Includes:
- (1) MERV 7 filter (30% ASHRAE rated), 19.5" x 19.5" x 7/8" thk.
Specs
• Type: Explosion-Proof, Reverse-Flow
• Material: Stainless Steel
• Filter Replacement Access: Top Side
• Size: 2'x2'
• Filter Frame Material: 304 Stainless Steel
• Filter: ULPA
• Motor Type: Permanent Split capacitor (PSC)
• Airflow: Negative Pressure
• Special Application: Explosion-Proof
• Unit of Measure: EA
• Marks & Listings: UL, ULC
• Electrical Specifications: 120 V, 6.8 A, 816 W, 60 Hz
• Weight, Product: 44 Lbs
• Dimensions, Product: 23.72"W x 23.63"D x 19.86"H
• Weight, Shipping: 64 lb
• Dimensions, Shipping: 53"W x 53"D x 20"H
• Package Type: Palletized