1. Home
  2. Pass-Throughs
  3. Smart™ Pass-Through
  4. CleanMount® Smart™ Pass-Through Accessories
  5. Automatic Pass-Through Doors

Automatic Hands-Free Door Operator
For use with Smart Pass-Through™ Chamber

smart pass-through automatic door smart pass-through automatic door motion sensor
Automatic, hands-free door opener
(Cat. No. 2635-60) shown installed on the "clean" side of a Smart Pass-Through Chamber.
Integrated motion sensor activates
the door mechanism following a hand wave
(door closes after a set period of time)

The motion sensor-activated Automatic Door Operator eliminates the touch-contamination that normally results from using a standard pass-through door to transfer materials.  Hands-free operation is especially well suited for pharmaceutical and medical applications as it negates the need for hand-cleaning and/or re-gloving after using the pass-through.

  • All components of the Automatic Door system are built into the body of the pass-through and does not require a separate power source 
  • Handle-less door quietly and smoothly swings open after the sensor pad detects movement, generally a wave of the hand
  • Motion sensor is calibrated to require an ample hand wave to prevent accidental door opening from personnel passing by
  • Integration with Smart Pass-through's electronic interlock avoids cross-contamination by deactivating the Automatic Door mechanism when the opposite side is opened
  • The electromechanical drive is mounted above the door inside a stainless steel housing for easy wipe-down
  • Automatic doors can be locked in the "open" position for periodic cleaning and maintenance
  • In the event of a power failure, automatic doors can be pulled open to retrieve the contents in the transfer chamber

The standard Automatic Door configuration includes one Automatic Door on the "clean" side and a standard Smart Pass-through door on the "dirty" side. Automatic doors and motion sensors can be installed on both sides of the pass-through on a custom basis.

Compatibility with Other Smart Accessories: The Automatic Door Operator can be combined with any other Smart Accessories (some customization may be required).

Installation Note: Equipping a standard Smart Pass-through with an Automatic Door Operator will increase the width and height of the pass-through by approximately 1.5".  This will have an impact on the size of the wall cut-out needed for installation.  Terra recommends carefully measuring the pass-through to verify the final dimensions before making the wall cut-out.

Requires selection of Terra's Smart Pass-Through chamber.

See operation video below!

Cat. # Price
2635-60 $ 2,750
24-hour sales and tech phone support, M - F
Call a Terra Pass Through specialist direct
Hours: 5:30 - 17:30 M-F
(your local time)
Go to...
Go To