Purifier® Logic™ Class II Biosafety Cabinets

• Offered in type A2 configuration that meet all NSF standards (see sidebar below)
• Offers the largest working area of any biological safety cabinet in its class
• ECM (Electronically Commutated Motor) Technology precisely controls airflow without the need for sensors or calibration
• Smart-Start and Night-Smart Systems automate start/stop procedures and blower speeds
• The LCD information center warns of sudden airflow changes that might indicate an airflow blockage

Purifier® Logic™ Biosafety Cabinets set the standard for safety, performance and ergonomics. These cabinets have been completely redesigned from the Delta Series cabinets they replace. They meet or exceed all the standards set forth by the NSF International, including 99.99% efficient HEPA filters, nominal inflow of 105 fpm, and all positive-pressure ducts surrounded by negative pressure plenums.

Computerized Monitoring of Purifier® Logic™ Class II Biosafety Cabinet Operation
Purifier Logic Biosafety Cabinets utilize Electronically Commutated Motor (EMC) Technology, which precisely controls airflow without the need for airflow sensors. The motor is programmed during the cabinet’s manufacturing process to consistently deliver the precise volume of air required, even as filters load.

A unique line-of-sight LCD information center, which is in constant communication with the ECM, continuously monitors and displays the cabinet’s performance, including remaining HEPA filter life.

Other intelligent safety features include the Smart-Start and Night-Smart Systems. Smart-Start allows the user to program start-up and shut-down procedures such as activation and deactivation of the blower and fluorescent and UV lights when the sash is opened or closed. Automating routine start-up and shut-down procedures assures consistent, operator-independent operation and saves time.

Night-Smart idles the blower at 30% speed or less when the sash is fully closed to help maintain a clear, particulate-free environment inside the cabinet during periods of non-use.

The LCD shows bar graph displaying filter life remaining and icons indicting features in operation. The benefits of the LCD information Center: Easy readability – The LCD is mounted on the interior right side wall at the user’s line of sight for at-a-glance activity monitoring: cabinet function, filter load and features in use. Status line gives descriptive feedback on the systems conditions, such as “OK” or “sash too high.” “Filter Remaining” bar graph – A continuous bar graph depicts percentage of HEPA filter life remaining to provide reassurance and allow the user to accurately and confidently plan future filter replacement. Airflow alert warns of sudden airflow changes, which could indicate an obstruction blocking airflow.

Purifier® Logic™ Class II Biosafety Cabinet:
Features and Specifications

• Nominal inflow velocity of 105 feet per minute (fpm) (0.5 m/sec)
• Nominal downflow velocity of 55 fpm (0.3 m/sec)
• Approximately 70% air recirculation in Type A2
• Cord Management System keeps tubing and cords out of the user’s work area, offering the most cubic feet of work space in the industry
• Curved inlet grille provides a comfortable surface for forearms resting on it
• Angled, counterbalanced tempered safety glass sash allows closer, more comfortable viewing without glare — fully closing with over 29” of viewing height
• Type 304 stainless steel dished work surface with lift-out knobs
• Reserve-Air Secondary Airflow Slots draw air into the cabinet should the operator inadvertently block portions of the inlet grille
• Contain-Air Negative Pressure Channel draws air in, preventing loss of containment at the top of the sash
• Bright, glare-free fluorescent lighting with timer and solid state ballasts provides 90-100 footcandles at the work surface, exceeding NSF standards
• Optional 254 nm UV lamp

Purifier Logic Advantages

Compared to biosafety cabinets with conventional motors, the Purifier Logic Biosafety Cabinet uses 58% less energy during normal operation and over 94% less energy during Night-Smart operation.  It also generates 39% less heat and is as much as 50% quieter and 53% brighter (depending on the model) and has a 230-400% longer motor life.

Purifier® Logic™ Stands
All are tested to NSF standards for stability and construction.

	Telescoping – Epoxy-coated 1.75” tubular steel. Adjustable at installation in 1” increments to provide a working height from 30” to 36”; 29”D. Specify fixed leveling feet or toe-locking casters.	Hydraulic Lift Stand – Epoxy-coated 1.75” tubular steel with 2” x 3” tubular steel subframe. Infinitely adjustable from 25.5” to 33.5” high; 24”D.  Fixed feet and manual hand-crank lift.	SoLo™ Hydraulic Lift – Allows cabinet transport through standard doorways as low as 78”H. Epoxy-coated steel, Remote-control operated hydraulic lift provides infinitely adjustable work surface heights from 17.2” to 36.8”H; 34.3”D. Includes toe-locking 5”-diameter casters