Sealed isolation chamber safely shields medications, pharmaceutical powders, neutraceuticals, and other sensitive materials against contaminants
USP-797 Compliant – meets ISO 5 (Class 100) cleanliness requirements
Blower module continuously circulates process environment through a 99.99% efficient HEPA filter to remove impurities, including most bacteria
Smooth, easy-clean surfaces facilitate cleaning and sterilization – select 304 stainless or powder-coated steel
Antimicrobial coatings available
Ergonomically sloped static-dissipative PVC viewing window accommodates 10"-diameter glove ports (order gloves separately to meet requirements for size and chemical compatibility)
PVC lift-up windows and side swing door for convenient parts access (air locks also available)
Includes fluorescent illuminator – UV sterilization and fluorescence detection lights available
Rear panel opens for easy cleaning of air circulation plenum
Mobile and auto-adjusting ErgoHeight stands ensure convenient, ergonomic operation
Custom configurations include Facility connections (power, vacuum, air and water) Bag out ports for safe, convenient contaminant removal Negative pressure exhaust system to protect against cytotoxins VHP® (vaporized hydrogen peroxide) Biodecontamination System*
Call to discuss your application!
*VHP® is a registered trademark of Steris Corporation.
Two-Way Access –
Front window tilts up to accommodate large equipment; front door swings opens to allow movement of smaller packages
Includes IV rod
Rear panel directs make-up air to filter/blower plenum; opens for easy cleaning
Specifications
Dimensions (nominal)
Chamber ID:
43"W x 27"D (bottom) / 24"D (top) x 26"H
Overall:
45.00"W x 32.00"D (bottom) / 28" (top) x 41.5"H (excluding door hardware)
Access Openings:
37.5"W x 21"H (with access window open); 10.75"W x 15.5"H swing door opening
Access ports:
10" diameter
Access doors:
Stainless steel frame with 3/8" static-dissipative PVC window and chrome-plated lifting latches
24" x 36" low-vibration impeller blower module with direct-drive, continuous-duty two-speed fan and 99.99% efficient HEPA filter (rated @ 0.5µm particle size); operates at less than 50dBA
All models feature static-dissipative PVC viewing window and US-
standard plugs; specify international plugs if required. Order gloves and work surface below.
Optional AccessoriesGloves and Sleeves
All are for 10"-diameter ports.
For all sizes. Includes G.U.S. Connectors
(see above)
Stands
Stands for Series Compounding Gloveboxes Constructed of all-welded 2" square tubing. Select oven support for use with Terra's High-Performance Pass-Through Oven
(No. 5401-00A). All stands raise chambers 30" off of floor (add 3" for casters).
One-Piece Bonded Neoprene Hand & Sleeve
Neoprene Gloves 13" long, unlined textured grip
Neoprene Sleeve 
