Wrist/Heel Straps Testers and Monitors |
|
Combination Tester
For Wrist Straps or Foot Grounders
- Dual test circuits allow versatile testing
of footwear or wrist straps
- Test results appear on easy-to-read LED
display
- Convenient, touchpad operation
- Red light and audible alarm indicate
if circuit resistance is too high or low
This economical, versatile Combo Tester
lets you verify the integrity of wrist straps and foot grounders
with a single instrument.
To activate, the user simply touches the
front panel. Auto-ranging circuitry automatically selects
the proper test range, and clear test results appear on a
large LED display. Its battery-powered operation makes it
convenient to install at any location. Includes a low-battery
indicator. Wrist strap range: 750 kilohms to 100 megohms.
Footwear range: 750 kilohms to 100 megohms. Shipping weight:
15 lbs.
| Cat.
# |
$/Each |
|
1801-67 |
Login
|
|
|
|
Wrist/Foot Strap Tester
This dual-function instrument is designed to test standard single-conductor wrist grounding strap assemblies and heel or toe grounders. A mode selection switch allows you to toggle between wrist and foot strap testing modes. Includes four LED indicators: Low Fail, Pass, High Fail, and Low Battery. Operates on one 9VDC battery or from an optional 120VAC power adapter.
| Cat.
# |
$/Each |
|
4400-30 |
Login
|
|
|
Wrist Strap Touch Tester
- Touch-type, on-demand tester is ideal
for testing wrist straps and smocks
- Quick and easy installation and grounding
of both wrist straps and table mats
- Highly reliable resistance testing—tests
the entire circuit including the wrist strap, cord, and
skin contact
This Touch Tester provides a fast, convenient
way to verify the correct function of grounding wrist straps,
smock and table mats.
It is easy to install and connects to utility
ground when plugged in. Because it tests the entire grounding
circuit, it eliminates the need for any additional test equipment.
No other grounds are needed; it acts as common grounding point
for the entire work surface. Range: 750 kilohms to 10 megohms.
Power: 120VAC, 50/60 Hz. Shipping weight: 0.70 lbs.
| Cat.
# |
$/Each |
|
1801-66 |
Login
|
|
|
 |
| Cat.
# |
$/Each |
|
1801-65A |
Login
|
|
Dual-Operator & Work Station Monitor
- LEDs continuously indicate proper grounding
of two mats and two operators
- Mounting system keeps monitor off the
benchtop to conserve valuable working space
- Two satellite remote monitors include
monitored wrist strap ground, parking stud, and unmonitored
ground for guest or equipment
- Audio alarm sounds continuously if wrist
strap coil cord is inserted in ground and cord is not connected
to worn wrist band
- Utilizes reliable wave distortion technology
This workstation continuously monitors two
operators and the work surface to ensure that sensitive materials
are protected against electrostatic charges.
Continuous monitoring ensures a static-safe
environment throughout the manufacturing operation and eliminates
the inconvenience and disruption of periodic testing. This
unit uses wave distortion detection technology, which monitors
current/voltage phase shifts and provides true, 100% continuous
monitoring. A mounting bracket allows mounting the unit at
eye level, off the work surface. Use with mat types T2, Z2,
L, G2, or any mat that has a conductive layer. Power requirement:
120VAC, 50/60Hz. Shipping weight: 10.20 lbs. |
| |
