Optica Microplate Reader from Jencons Scientific
- Two optical filters built in as standard
- Optional addition of two more filters
- Full onboard control or control via PC (accessory software required)
- Accommodates all 96-well plate types
- 8 independent channels
- quiet and reliable
- Minimal footprint
The Optica microplate reader is an 8-channel photometer for 96-well microplates. It can be operated using either the onboard software via the 17 key membrane and back lit LCD or through a PC (software required but not supplied). Results can be printed utilizing a dot-matrix printer connected directly to the Optica or to any printer that is connected to the PC. The Optica software lets you run up to 10 different assays per session with plates containing up to 12 standards and 12 controls. Assays can be configured and saved onto the hard disc ready for future use. The software also enables the processing of a qualitative or a quantitative assay with qualitative interpretation which is visualized in a graph. Individual data cards can be generated for each patient and all test results can be saved or printed out.
| Specifications |
|
Reading principal: |
8 channel mono or biochromatic reading |
Light source: |
8 independent tungsten bulbs |
Detectors: |
8 silicon photodiodes |
Measuring range: |
450nm to 630nm with filters supplied, 405nm to 750nm with optional filters |
Measuring times: |
16 seconds—full plate monochromatic, 32 seconds—full plate biochromatic |
Accuracy: |
±1% from 0.000 to 1.500 OD, ±2% from 1.500 to 3.000 OD |
Result curves: |
direct plotting point to point, linear regression and 4 parameter (log-logit) |
Result calculation modes: |
OD, direct or calculated cut-off, single calibrator, programmable curves from 2 to 12 point |
Plate shaking: |
timed linear shaking |
Interfaces: |
user interface—2x20 character LCD and 17 key membrane switch panel, printer interface—printer port for a dot-matrix printer, PC interface—RS232 to PC using Windows™ 98/XP/ NY/2K |
Power supply: |
110/230V AC, 50-60Hz |
Dimensions: |
8”W x 22.7”D x 9.5”H (200x577x240mm) |
Weight: |
18 lbs (8.2 kg) |
Optica Microplate Reader |
Description |
Cat. # |
$/Each |
Optica Microplate Reader with two filters (450-630nm)* |
8000-17 |
Login |
PC software supplied with RS232 cable |
8000-18 |
Login |
Additional filters |
8000-19 |
Login |
*Specify power supply when ordering.
|
