Ergo Machine Stand

Specifications Seal Width: .25" Standard Dimensions: Length = seal length + 5.5" x 9.5"W x 8.5"H Vacuum Pressure: Up to 26" Hg standard Suction Flow: Up to 1.4 CFM/nozzle standard (up to 4.8 CFM/nozzle available) Air Requirements: Up to 2.4 CFM standard @ 90 psi See ordering chart for other specifications.

Precision Vacu-Sealer – Model 635

• Ideal for cleanroom use!
  • No-maintenance Venturi vacuum uses no moving parts, generates no particulates
    
  • Isolated exhaust port prevents contamination of surrounding cleanroom
    
  • Clean exterior layout makes cleanroom prep fast and easy
• “No Pinch” Vacuum Jaw increases user safety, eliminates the need for complex bag stretchers
• First-of-its-kind LCD operator panel displays status of sealer at all times
• Digital timers can be set to .1 second for finer control and repeatability
• Safety features prevent operator injury resulting from jaw pressure or premature heating
• Exclusive, independent jaw system with optimal spacing eliminates bag waste
• Backed by a two-year warranty

This Next-Generation Vacuum Sealer sets a new standard by which vacuum sealers will be measured.

This workhorse incorporates an exclusive “Smart Pad” control center for easy, efficient cycling. It includes 98 independent digital gas/vacuum cycle timers, multi cycle/reverse cycle, manual override by any timer, cycle counter, scheduled maintenance alarms, on-board electronic user and troubleshooting guides, and password-controlled lock-outs. The “soft touch” retractable nozzles, with Long Reach and High-Efficiency Orifice, simplify product loading/unloading, allowing hands-free operation in most cases and minimizing both contamination and seal imperfections. These features provide everything needed to meet GMP, ISO 9000, and operational flexibility requirements.

Clean, Reliable Operations
This unit is ideal for cleanroom sealing operations. Such features as a non-particulating Venturi vacuum system and isolated exhaust port prevent the introduction of contaminants into the cleanroom. Its foot pedal control allows “no touch” activation, and the retracting “Soft Touch” nozzle minimizes the need to handle a sample.

The Model 635 is engineered and manufactured for a long service life under the most demanding operating conditions. Its electronics are fully burn-in tested and matched to a rigid, welded steel case and the highest quality pneumatic components. This adds up to a tough machine that will perform for years, even in the harshest production environments.

Safety features include low pressure jaw closure, which precludes operator injury caused by pinching. Because jaws don’t heat until completely closed, the operator is protected from burns. An emergency ESC key immediately aborts operation and opens jaws.

Other standard features include multiple operational mode presets, vacuum gauge, thermal overload protection, product support tray, and free technical phone support. See below for optional Digital Temperature Control and Digital Gas Pressure Control, along with other available options. Compressed air supply source is required.

Model 635 Sealers Seal Length Dimensions Ship Weight Seal Width 110VAC 50/60Hz, 7A 220VAC, 50Hz W" x D" x H" lb Cat. # $/Each Cat. # $/Each 20" 26 x 10 x 8 38 .25" 4051-95 Login 4051-95-220 Login 25" 31 x 10 x 8 45 .25" 4051-96 Login 4051-96-220 Login 30" 36 x 10 x 8 46 .25" 4051-97 Login 4051-97-220 Login 35" 41 x 10 x 8 50 .25" 4051-98 Login 4051-98-220 Login

CE certification is included with all 220V Accu-Seal sealers.