714-578-6100
M-F, 5:30am - 5:30pm, L.A. Time

Enclosed Safety Shower

Enclosed Safety Shower
Enclosed Safety Shower
Dual-Access Model
(with opposing strip curtains)
  • Provides full-body shower and eye wash while protecting lab against water and chemical splashes
  • Polypropylene enclosure resists most lab acids and corrosives
  • Easy-parting transparent vinyl curtain allows fast, convenient access while shielding the external environment
  • Immediate-response operation handles are easy to activate
  • Pass-Through design available to accommodate multiple facilities

Terra's safety shower combines easy, reliable operation with a fully enclosed design that enhances safety both inside and outside the shower area.

The polypropylene shell resists most laboratory acids and corrosives. By shielding the shower on three sides, it minimizes the chance of the water spray—or of harmful chemical splashes—affecting parts or personnel outside the shower. The vinyl strip curtain on the front is easily parted for quick entry into the enclosure. This design eliminates the tricky task of fumbling with a door latch in an emergency situation. The pass-through design, which includes parting curtains on opposing sides, can be installed in a wall or hallway connecting two labs to allow fast, easy access from either facility.

All eye rinser hardware is zinc-plated. The standard overhead nozzle height is 78" (1981 mm) off the shower floor; the eye rinsers are positioned 42" (1067 mm) off the floor. The shower comes complete with PVC plumbing that connects to your in-house water supply by means of a 1.25" (32 mm) ID pipe fitting. The sloping bottom feeds into a 2.5" (64 mm) drain line.

  Cat. # Price
Single Access 1530-50 Price
Dual Access (Pass-Through) 1530-51 Price

 

Specifications
Dimensions: 38"W x 41"D x 90"H
(965 mm x 1041 mm x 2286 mm)
Construction

Outer Shell: Welded 0.5" (13 mm) polypropylene shell with 40 mil transparent vinyl strip curtain on front, 8" (203 mm)-wide strips with 2" (51 mm) overlap
  Nozzles: 10" (254 mm)-diameter ABS plastic overhead nozzle, 5.75" (146 mm)-diameter flow pattern, with 304 stainless steel pull handle; zinc-plated eye rinsers, 8" (203 mm) center to center in 12" (305 mm)-diameter bowl, mounted 42" (1067 mm) off floor, with zinc-plated push handle
  Plumbing: 1.25" (32 mm) polypropylene pipe (supply line); 2.5" (64 mm) polypropylene drain line
Installation: Requires 1.25" (32 mm) ID (male) water feed line connection and 2.5" (64 mm) ID (male) drain line connection
24-hour sales and tech phone support, M - F