Terra Part # 3644-06
$32,543
Usually ships in 30-34 business days

Want it faster ? Read about FasTrak

Accessories related to Terra Part # 3644-06
51490
Glovebox; Protector, Fiberglass Liner, 63.9" W x 34.4" D x 45.7" H, 2 Glove Ports, Pressure Control, Labconco, 120 V
  • Protector Controlled Atmosphere Gloveboxes provide a leak-tight environment ideal for contamination-sensitive materials under vacuum or in an inert environment
  • Requires Supporting Base, Vacuum Source, Inert Gas
  • Pressure control and foot pedal included
  • Fiberglass-lined model
  • Factory leak-tested with a mass spectrometer while pressurized with Helium at 5 inches of water gauge
  • Exceeds Class 1 atmosphere containment conditions for oxygen permeation
  • Contains space-saving inner and outer transfer chamber doors that pivot upward
  • Large viewing area, 36" W x 27.6" H (914 x 701 mm), for maximum viewing capabilities
  • Two rear-mounted inlet and outlet fittings for easy connection to optional AtmosPure Re-Gen Gas Purifier or other accessory

Material Type: Powder Coated Steel

Model: Protector

Number of Glove Ports: 2

Window Material: Acrylic

Liner Material: Fiberglass

Chamber Material: Powder Coated Steel

Chamber Width: 64"

Chamber Depth: 34"

Chamber Height: 45"

Chamber Dimensions: 64" W x 35" D x 46" H

Maximum Working Height: 41"

Airlock Opening: 12" W x 20" H

Unit of Measure: EA

Marks & Listings: UL, ETL, CSA

Electrical Specifications: 120 V, 10 A, 50/60 Hz

Dimensions, Product: 63.9" W x 34.4" D x 45.7" H

Weight, Shipping: 500 lb

Dimensions, Shipping: 44" W x 72" D x 56" H

Package Type: Palletized

Buy Accessories
  1. Stationary and mobile adjustable-height stands for Protector and Precise Glove Boxes (mobile stand shown with 5" casters) | 3643-22 displayed
    $2,901
    Increase Down Increase Up
  2. Stationary and mobile adjustable-height stands for Protector and Precise Glove Boxes (stationary stand shown). | 3643-23 displayed
    $2,901
    Increase Down Increase Up
  3. Foot Switch, Blower, for Protector Labconco Gloveboxes
    $573
    Increase Down Increase Up
  4. Gloves, Neoprene, Size 8 1/2, one pair, for Labconco Gloveboxes
    $473
    Increase Down Increase Up
  5. Gloves, Neoprene, Size 9-3/4, one pair, for Labconco Gloveboxes
    $473
    Increase Down Increase Up
  6. One-piece, seamless gloves for use with Labconco glove boxes
    $652
    Increase Down Increase Up
  7. One-piece, seamless gloves for use with Labconco glove boxes
    $674
    Increase Down Increase Up
  8. Hypalon glove and sleeve combination provides superior dexterity | 3643-02 displayed
    $551
    Increase Down Increase Up
  9. Hypalon glove and sleeve combination provides superior dexterity | 3643-02 displayed
    $551
    Increase Down Increase Up
  10. Straight Sleeves, one pair, for Labconco Gloveboxes
    $473
    Increase Down Increase Up
  11. Accordion Sleeves, one pair, for Labconco Gloveboxes
    $683
    Increase Down Increase Up
  12. Meets demanding daily ventilation requirements of various hood types | 3645-52 displayed
    $1,334
    Increase Down Increase Up
  13. Shown are exterior glove port covers placed over gloveports on a Labconco glovebox. | 3643-51 displayed
    $168
    Increase Down Increase Up
  14. Glove Port Cover, Interior, for Labconco Gloveboxes
    $1,286
    Increase Down Increase Up
  15. Window, Polycarbonate Viewing, for Labconco Glove boxes
    $1,610
    Increase Down Increase Up
  16. Flowmeter, for Protector Labconco Glove boxes
    $626
    Increase Down Increase Up
  17. Thimble Exhaust Connect, 6", for Protector Labconco Glove boxes
    $613
    Increase Down Increase Up
  18.  | 3643-46 displayed
    $232
    Increase Down Increase Up
  19. Filter, Gas and Vacuum, 0.2 Micron, for Labconco Gloveboxes
    $433
    Increase Down Increase Up
  20. Replacement Media for Molecular Sieve, for Labconco Gloveboxes
    $140
    Increase Down Increase Up
  21. Filters particulates before entry in to vacuum pump. | 3644-19 displayed
    $691
    Increase Down Increase Up
  22. Filters the glove box's inlet and outlet as the inert gas is purified. | 3644-20 displayed
    $116
    Increase Down Increase Up
  23. Filters the glove box's inlet and outlet as the inert gas is purified. | 3644-21 displayed
    $232
    Increase Down Increase Up
  24. Regenerates plumbing connections | 3644-22 displayed
    $214
    Increase Down Increase Up
  25. Fittings permit neoprene hose (not included) to attach to Precise Glove Box's inlet/outlet. | 3644-27 displayed
    $263
    Increase Down Increase Up
  26. Allows AtmosPure and glove box configured with Auto Pressure Controller to share one vacuum pump. | 3644-28 displayed
    $144
    Increase Down Increase Up
  27. Allows for automatic control of the AtmosPure blower from an accessory Oxygen or Mositure Monitor | 3644-29 displayed
    $142
    Increase Down Increase Up
  28. Rotary Vane Vacuum Pump by Labconco delivers a reliable vacuum source for lyophilizers, glove boxes and concentrators | 3643-79 displayed
    $4,449
    Increase Down Increase Up
  29. For use with Class II, Type A2 and B2 Biosafety Cabinets | 3647-40 displayed
    $267
    Increase Down Increase Up
  30. Measures dew point range from -80 to 0C or 0 to 6000 ppm. | 3644-30 displayed
    $5,451
    Increase Down Increase Up
  31. Hand-held Digital Hygrometer, measures % RH from 0-100% and temperature in °F or °C; calculates dew point and wet bulb temperature based on RH and temp readings | 3643-58 displayed
    $779
    Increase Down Increase Up
  32.  | 3643-71 displayed
    $3,671
    Increase Down Increase Up
  33.  | 3643-71 displayed
    $5,373
    Increase Down Increase Up
  34.  | 3643-71 displayed
    $1,409
    Increase Down Increase Up
  35. Add-A-Valve kit for Labconco Glove boxes
    $346
    Increase Down Increase Up
  36. Pass through Installation kit, for Plastic Labconco glove box
    $185
    Increase Down Increase Up
  37. White Glove Freight Service
    Request Quote
    Increase Down Increase Up
  38. Qualification Documentation (IQ/OQ) for Terra Universal System
    Request Quote
    Increase Down Increase Up
  39. Equipment Testing
    Request Quote
    Increase Down Increase Up
  40. FasTrak 24-7 Expediting Service
    Request Quote
    Increase Down Increase Up

Glove Box Isolators by Labconco

  • Protector Filtered Glove Box by Labconco
  • Labconco Protector Fiberglass Controlled Atmosphere Glove Box Labconco Controlled Atmosphere Glovebox
  • Labconco Precise Controlled Atmosphere Glovebox Labconco Precise Series Controlled Atmosphere Glove Boxes
  • Protector Combination Glove Box with Stainless Steel Lining Labconco Stainless Steel Protector Filtered Glove Boxes
  • Labconco Protector Filtered Glove Box Labconco Protector Filtered Glove Box
  • Labconco Protector Stainless Steel Double Filtered Glove Box Labconco Protector Stainless Steel Double Filtered Glove Box
  • Protector Filtered Barrier Isolator Glove Box with HEPA Filter Protector Filtered Barrier Isolator Glove Box with HEPA Filter
  • Labconco Protector Combination Glove Boxes Labconco Protector Combination Glove Boxes
  • Labconco Precise Basic Glove Box With Stand Labconco Precise Basic Glove Box

Features and Benefits

Labconco Protector Combination Glove Boxes

Labconco Combination Glove Boxes – Controlled Atmosphere and Filtered

Protector Combination Glove Boxes merges the features of filtered and controlled atmosphere models into one unit. Closure of two internal valves converts the box to a controlled atmosphere glove box that can be pressurized up to ±5 inches of water gauge for a leak-tight inert atmosphere. When atmosphere-sensitive procedures are complete, opening the two internal valves allows air from inside the box to pass through a HEPA outlet filter and optional second HEPA or Carbon outlet filter before exhausting via a ductwork to the outside. The physical barrier and filtration system protect users from exposure to hazardous materials and contamination-sensitive materials from degradation.

Additional Features of Protector Combination Isolation Glove Boxes
  • Automatic control of main chamber pressure, main chamber evacuation and filling cycles and transfer chamber evacuation and filling cycles
  • Factory-leak tested with a mass spectrometer while pressurized with Helium at 5 inches of water gauge
  • Detectable leaks: No greater than 1 x 10-6 ml/sec
  • LCD display provides real time monitoring of volume dilution rates in cubic feet per minute (CFM), air changes/minute (ACM), main chamber pressure (inches of water), and transfer chamber in inches of mercury and mBar
  • Interior right-hand side wall-mounted electrical receptacle with 10 amp maximum (100/115 volt models) or 10 amp maximum (230 volt models) circuit load
  • Two 8” ID, epoxy-coated aluminum double-grooved glove ports mounted 17” apart, with neoprene gaskets
  • RS-232 port, gas/liquid port, or port for oxygen or moisture monitor
  • Two 25-watt fluorescent lights
Features of Protector Filtered Glove Boxes
  • Airborne particulate cleanliness (measured under positive and negative pressures per ISO 14644-1 test method) exceeds ISO Class 5 conditions and achieves ISO Class 4 conditions
  • Inlet and outlet HEPA filters, 99.99% efficient on 0.3 micron particulates, rated for 70 CFM at <0.90" static pressure
  • Particulate containment: <20 nanograms per cubic meter as confirmed by SafeBridge Consultants, incorporated
  • Test port: HEPA or ULPA filter integrity
  • Safe filter removal and replacement with true bag-in/bag-out filter disposal system
  • Built-in blower speed control: from 15 CFM to 85 CFM depending on voltage and frequency
  • Clean up time: 0.05 ppm average tracer gas levels or less detected during perimeter scan testing (surpasses ASHRAE 110 standards) after 5 minute dilution
  • Inlet and outlet particulate (HEPA or ULPA) filters provides a leak-tight environment preventing contaminants from entering or exiting chamber
  • One-piece molded fiberglass liner
  • Clear acrylic inner and outer transfer chamber doors
Features of Protector Controlled Atmosphere Glove Boxes
  • Exceeds Class 1 atmosphere containment conditions for oxygen permeation less than 1.67 ppm/min per ISO 10648-2 test method
  • Oxygen permeation: <0.3 ppm/min (fiberglass-lined models) and <0.15 ppm/min (stainless steel-lined models) per ISO 10648-2
  • Input/Output port for optional AtmosPure Re-Gen Gas Purifier
  • Four manual valves with 3/8” compression fittings (two on main chamber and two on transfer chamber for evacuating, filling and added control
  • Main chamber pressure: automatic control (-5 to +5 inches of water gauge)
  • Main chamber evacuation and filling cycles: up to 499 cycles
  • Evacuation and filling cycles of transfer chamber evacuation: up to 199 cycles
  • Vacuum/pressure regulation: between -5 and +5 inches of water gauge in the main chamber and between 0 and -29.5 inches of mercury in the transfer chamber
  • Alarms: mutable and audible (when pressure/vacuum level is outside set limits
  • Three-position foot pedal: increasing gas/fill, off, evacuate/decrease gas
  • Factory-installed, rear-mounted, low profile stainless steel pressure relief bubbler at ±6 inches of water gauge
  • Two rear-mounted inlet and outlet 3/4” OD compression fittings for easy connection to optional AtmosPure™ Re-Gen Gas Purifier or other accessory drying train
Fiberglass and Stainless Steel Models

The fiberglass-lined models feature a one-piece molded fiberglass liner with clear acrylic inner and outer transfer chamber doors. This model has been performance tested to maintain oxygen levels as low as 0.4 ppm and moisture levels as low as 2 ppm. The oxygen permeation is less than 0.3 ppm/min per ISO 10648-2 and illumination exceeds 120 footcandles.

The stainless steel-lined models feature a Type 304 stainless steel liner with Type 304 stainless steel inner and outer transfer chamber doors. Type 304 stainless steel material also comprises the front panel. This model has been performance tested to maintain oxygen levels as low as 0.2 ppm and moisture levels as low as 1 ppm. The oxygen permeation is less than 0.16 ppm/min per ISO 10648-2 and illumination exceeds 80 footcandles.

AtmosPure Re-Gen Gas Purifier

This gas purifier maintains ultrapure inert atmosphere within the Protector® Controlled Atmosphere Glove Boxes. It has the capacity to remove 5 liters of oxygen gas (13,500 ppm) and 660 grams of moisture (water vapor) which is equivalent to 18 million ppm. The regeneration is, in turn, completed in 13 hours. Additionally, the leak rate is ± 0.000001 mL/sec.

Popular Accessories
For a full list of accessories, select a product then click Choose Accessories on that product page.
  • Latex Gloves, Size 9-3/4, one pair, for Labconco Glove Boxes

    Choose latex gloves for optimal dexterity, gloves also available in neoprene, butyl and hypalon, with one or two-piece configurations.
  • Fan, Anti-static Ionizer, 100/115V, 50/60hz, for Labconco Glove boxes

    Labconco Anti-Static Ionizer Fan, compatible with Protector, Precise and XPert Glove Boxes, neutralizes static charge by circulating ionized air inside containment glove boxes; features a dual steady state DC circulator and easily mounts to light support.
  • Vibration Isolator, for Labconco Glove boxes

    Balance Vibration Isolator for Labconco Glove Boxes minimizes vibration within the chamber improve accuracy of sensitive analytical balances; includes a thick marble slab, 4 isolator pads and a 304 stainless steel protective top cover
  • Adjustable Height Mobile Stand for Labconco Glove Boxes

    Stationary and mobile adjustable-height stands provide stable support for 2- or 4-port Protector and Precise Glove Boxes (mobile stand shown with 5" casters)

On a tight schedule? Choose FasTrak 24/7 Priority Service to help meet your critical schedule for Terra-manufactured products, either before or after your order is placed.*

  • FasTrak 24/7 provides a 24/7 commitment to meet the shipping date YOU specify, regardless of quoted lead times.
  • FasTrak 24/7 assigns a dedicated production team plus a dedicated senior expeditor working three shifts to meet your delivery specification.
  • FasTrak 24/7 guarantees* to meet the agreed-to specified ship date.

Call for pricing. FasTrak service fees cover costs of additional services only, without additional profit.

 * Terra's FasTrak services limited guarantee: to ship on the ESD or date specified OR to refund up to 100% of FasTrak charges. This guarantee covers no direct, special, consequential or other damages and is strictly limited to up to 100% of the amount paid for FasTrak service. When a specified ship date is missed due to factors outside Terra's control (vendor performance, deliveries by shipping companies, etc.) and random factors such as accidents, the credit of up to 100% of the FasTrak 24/7 may not apply. FasTrak service requested after order placement will be quoted and accepted based on available time remaining before required ship date.

Hide
You need at least 2 products to compare Compare Clear All
Compare Products