Terra Part # 2636-12D-2
$7,975
Usually ships in 31-41 business days

Want it faster ? Read about FasTrak

Accessories related to Terra Part # 2636-12D-2
55343
Pass-Through; CleanSeam™, 24" W x 24" D x 36" H ID, Standard Floor Mount, 304 Stainless Steel

• Fully welded cleanroom passthrough without crevices, ideal for medical/pharmaceutical applications

• Continuous welds are suitable for moderate sterilization protocols

• Automatic door interlock allows only one door to open at a time to prevent cross-contamination

• Doors are leak-rated by UL for tight seal to maintain cleanroom air pressure gradients

• Stainless steel framed doors, latches, and hinges extend service life of passthrough chamber

• Cleanroom pass throughs reduce foot traffic, improve cleanliness, safety, productivity, and much more.

Chamber Design:

• Corrosion resistant all-304 stainless steel surfaces resists most harsh chemicals and alcohol-based cleaning agents, won’t produce contaminants during sterilization.

• Seamless welds eliminate hard-to-clean cracks and crevices where contaminants can collect.

• Floor-mounted design includes removable ramps to support transfer of carts and heavy equipment between controlled spaces.

Door Design:

• Access doors with 304 stainless steel reinforced frames extend passthrough chamber's service life and provide a tight seal.

• Doors include one-piece non-adhesive Santoprene® “e”-shape rubber gasket for tight seal to prevent outside air from leaking in; gaskets is non-outgassing and will not take a set or keep an impression.

• Heavy-duty stainless steel lift latches included to minimize scratching, corrosion and contamination resulting over time that can occur with chrome-plated latches.

• Chemical-resistant, static-dissipative PVC windows prevent static-clinging of particulates.

• Order replacement door(s) to avoid critical operation delays should a door be damaged and require immediate replacement.

Includes:

• (1) Automatic mechanical interlock

• (2) Removable ramps.

• Mounting brackets; Standard bracket mounting is 2" (51mm) from the front on the cleanroom side - specify other desired location

Inside Depth: 24"

Inside Height: 36"

Inside Width: 24"

Concealed Interlock: No

Continuous-Seam Welds: Yes

Electropolished: Optional

HEPA/ULPA Filtration: No

Material: 304 Stainless Steel

Model: CleanSeam™

Mounting Position: Standard Floor

Opening Dimensions: 22"W x 33"H

Special Door Configuration: Leak-Rated

Window Material: SD-PVC

Unit of Measure: EA

Dimensions, Product: 28" W x 28" D x 38.5" H

Dimensions, Shipping: 31" W x 29" D x 43" H

Marks & Listings: CE, UL

Package Type: Crate

Weight, Product: 103.8 lb

Weight, Shipping: 160 lb

Buy Accessories
  1. Racks shown mounted in pass through. Shelf sold separately. | 1993-40A displayed
    Shelf; Pass-Through Chamber/CleanSeam; 304SS, for 24"W x 24"D Non-Isolated Interlock Stocked Item is in stock and ready for immediate shipping
    $333
    Increase Down Increase Up
  2. Small (4") locking latch, catcher included. Grid shows one-inch squares. | 1603-80 displayed
    $85
    Increase Down Increase Up
  3. Stainless steel LiftLatch. Product details may differ. | 1603-67-2 displayed
    $68
    Increase Down Increase Up
  4. Removes solvents and other hazardous vapors from materials while they are in the pass-through | 6705-23 displayed
    Flange; Stainless Steel for Stainless Steel Pass-Throughs Stocked Item is in stock and ready for immediate shipping
    $329
    Increase Down Increase Up
  5. FasTrak 24-7 Expediting Service
    Request Quote
    Increase Down Increase Up
  6. Electropolish Service
    Request Quote
    Increase Down Increase Up
  7. White Glove Freight Service
    Request Quote
    Increase Down Increase Up
  8. Equipment Testing and Certification
    Request Quote
    Increase Down Increase Up
  9. Qualification Documentation (IQ/OQ) for Terra Universal System
    Request Quote
    Increase Down Increase Up
  10. UL Listing Declaration for Pass-Throughs
    Request Quote
    Increase Down Increase Up

CleanSeam™ Pass-Through Chambers

  • Cleanroom Pass-Through Chamber Video Overview Cleanroom Pass-Through Features and Selection Guide
  • CleanSeam™ Cleanroom Pass-Through Chamber CleanSeam™ Pass-Through Chambers
  • Cleanroom Pass-Through Chamber with Door Open CleanSeam™ Pass-Through Chamber, 18"W x 18"D x 18"H
  • Stainless Steel Cleanroom Pass-Through with Cart Ramps Floor-Mount CleanSeam™ Pass-Through, 36''W x 36''D x 48''H, with Cart Ramps
  • Stainless Steel Floor-Mount Pass-Through Chamber, 24''W x 24''D x 36''H, with Cart Ramp Floor-Mount CleanSeam™ Pass-Through, 24''W x 24''D x 36''H, with Cart Ramp
Cleanroom Pass-Through Chamber Video Overview

Features and Benefits

Cut-Out DImensions

CleanSeam Pass-Through Chamber

Don't risk operational delays or cleanroom shutdown because of a damaged door!
Terra's pass-through chambers last indefinitely, much longer than our standard product revision cycle. Pass-Through doors, however, are subject to damage, and ordering a legacy replacement can be costly and disrupt cleanroom operation. To avoid these problems, order replacements at the time you purchase the pass-through chamber; simply add “-RH” (for right-side hinge) or “-LH” (for left-side hinge) to the part number of the chamber.

Access Clearances
Width = W (nominal) – 1.88”
Depth = D (nominal) – 0.12”
Height = H (nominal) – 1.25”
Wall Cut-Out = W (nominal) +2” x H (nominal) + 1.5”
Mounting Illustration with Door Swing Direction

Continuous-Seam Welds Eliminate Particle Traps!

CleanSeam™ Pass-Throughs feature fully welded, seamless interiors, to eliminate hard-to-clean cracks and crevices that can harbor contaminants. The continuous-seam welds are ground smooth to simplify cleaning and sterilization.

Pass-Through Chamber Interlock

Terra’s automatic mechanical interlock prevents cross-contamination by allowing one door to be open at a time. Encased in stainless steel, the mechanism is rated for millions of operations, more than enough to last the lifetime of the pass-through.

High Caliber Hardware

Don’t be concerned about the quality, durability, and craftsmanship of your latches, ports, glides and hinges. Terra’s products are made of long lasting, cleanroom compatible, top tier hardware.

Stainless Steel Reinforced Doors and Handles

Doors on professional-grade pass-through chambers are reinforced with stainless steel frames, which lend rigidity, improve the seal, and extend the service life of the doors.

One Piece Elastomer Gasket

The white, “e”-shaped gasket provides a flexible seal that will not creep or deform over time. The gasket is made of a non-outgassing, thermoplastic elastomer that is resistant to harsh chemicals and extreme temperatures.

Popular Accessories

For a full list of accessories, select a product then click Choose Accessories on that product page.
  • Mounting System for Tempered Glass Wall Panels
    This unique mounting system allows installation of pass-through chambers on Terra Universal's modular cleanrooms with tempered glass wall panels.
  • Passthrough Ventilation Exhaust Ducts
    Adding a duct flange to the top of the passthrough allows the chamber to be ventilated by a remote blower. The ULPA-filtered inlet, housed in a perforated stainless steel cage, provides the necessary make-up air without contaminating the chamber.
  • CleanTop™
    The CleanTop™ is designed for installations that require the chamber to be centered in the wall. The 30° sloping top on the cleanroom-side minimizes particle accumulation and accommodates laminar downward airflow.
  • Passthrough Chamber Door Stop
    This stainless steel door stop limits the arc of the pass-through door's swing to 90°, preventing damage to wall, door latch and other components. Door stops can be adjusted to allow other angles.
  • Support Brackets for Pass-Through Chambers
    Stainless steel support brackets are recommended for pass-throughs deeper than 24". Brackets fasten to the wall and the body of the chamber rests upon the horizontal bar; no fasteners are used on the pass-through itself.
  • Grounding Terminals
    Grounding terminals are ideal for the most static-sensitive applications (must be ordered with chamber; cannot be retrofitted).

On a tight schedule? Choose FasTrak 24/7 Priority Service to help meet your critical schedule for Terra-manufactured products, either before or after your order is placed.*

  • FasTrak 24/7 provides a 24/7 commitment to meet the shipping date YOU specify, regardless of quoted lead times.
  • FasTrak 24/7 assigns a dedicated production team plus a dedicated senior expeditor working three shifts to meet your delivery specification.
  • FasTrak 24/7 guarantees* to meet the agreed-to specified ship date.

Call for pricing. FasTrak service fees cover costs of additional services only, without additional profit.

 * Terra's FasTrak services limited guarantee: to ship on the ESD or date specified OR to refund up to 100% of FasTrak charges. This guarantee covers no direct, special, consequential or other damages and is strictly limited to up to 100% of the amount paid for FasTrak service. When a specified ship date is missed due to factors outside Terra's control (vendor performance, deliveries by shipping companies, etc.) and random factors such as accidents, the credit of up to 100% of the FasTrak 24/7 may not apply. FasTrak service requested after order placement will be quoted and accepted based on available time remaining before required ship date.

Hide
You need at least 2 products to compare Compare Clear All
Compare Products