Photo Gallery

Vacuum Connection Kit

All Turnkey Connection Kits include a solenoid vacuum valve and all necessary hosing, clamps, adapters and other connection hardware for the specified application. Draws power from the Vacuum Control Module.

Vacuum Control Module

This automatic Vacuum Control Module is especially important in testing or processing applications that require sustained exposure to a precisely regulated vacuum level it helps extend the service life of your vacuum pump by allowing continuous pump operation.

3-inch Diameter Caster Set

Casters are easily retrofitted for mobility. Products can be rolled out of the way when cleaning or relocated as workflow changes.

Desiccator RH NitroWatch Controller

The NitroWatch system allows humidity set-point control; by automating the nitrogen purge, it reduces supply gas costs by up to 78%. Combine with the control of the Dual Purge for maximized efficiency in your desiccators!

Labconco Balance Vibration Isolator

Labconco's balance vibration isolators minimize vibration when working with sensitive balances. Each isolator consists of a thick marble slab that rests on four isolator pads and a stainless steel cover that protects the surface.

Vacuum Safety Relief Burst Valve

Bleeds vacuum exceeding an adjustable pressure level to prevent damage to sample.

Vacuum Pressure Pump Diaphragm

Oil-free and noiseless operation makes this motor-mounted unit one of the best suited vacuum pumps available for cleanroom environments.

Duo Seal Vacuum Pump

Welch DuoSeal Vacuum Pump has a belt-driven, oil-seal design that extends durability and service life even under harsh operation conditions.

Dual Purge and NitroWatch

Terra’s Dual Purge and NitroWatch relative humidity controllers maintain a low-RH set-point inside a desiccator or glove box; they provide variable purge control that ensures continuous positive pressure and eliminates nitrogen waste.

Vacuum Nitrogen Pass-Through Oven

Pass-through oven provides a convenient, fast way to dry or degas parts before transfer into glove box chamber

Dry Glove Box Accordian Sleeve

Neoprene accordion sleeves with nitrile gloves allow fast glove replacement without the need to remove sleeve from glove box; rigid neoprene sleeve resists blow-back, allows easy hand insertion.

Glove Box Stand

Labconco Rotary Vane Vacuum Pump for FreeZone

Compatible with Labconco FreeZone Freeze Dryers, CentriVap Concentrators, and Precise or Protector glove boxes requiring vacuum service.

Glove Box Cord Feed-Through

A self-sealing port can be mounted in the lower-rear corner of the glove box chamber for passing cables or tubing into the isolator. Feed-throughs are also available for gas, vacuum and other electrical connectors.

Sleeve and Glove Assemblies

Sleeve/glove combinations, available in many materials, allow fast, inexpensive glove replacement without removing sleeves from the glove box port (shown: Hypalon with glove/sleeve connectors).

"Sharps" Waste Port

The side or floor mounted waste port offers easy disposal of sharps or other waste. The 6"-diameter port is flush with the interior of the main chamber and has a 3” flange below the surface for connecting waste containers (includes cover).

Pass-Through Vacuum/Nitrogen OVen

Dries and degasses parts at temperature to 300°Cbefore transfer into a stainless steel glove box (right/left-mounting available).

IV Bag Rod

The main compounding chamber includes a stainless steel IV rod for suspending IV bags at a convenient height during compounding (hooks not included).

Sliding Transfer Door

A 0.5”-thick tempered glass door glides in a polypropylene track between the antechamber and main chamber, maintaining separation and the USP-prescribed pressure gradient when closed.

Heavy-Duty Quick-Release Door Hinges

The tilt-up front panel pivots on stainless steel hinges that allow the entire panel to be easily detached for maintenance or cleaning; simply disconnect the lift-assist gas struts and slide the door off.

Certification Test Ports

Two ports (normally plugged) allow independent verification of the chamber pressures monitored by the Magnehelic gauges, simplifying certification (the “Ambient” reference port always remains open).

Installed Vacuum Gauge and Metering Valves

Gauges and valves preinstalled on vacuum chambers allow vacuum application, monitoring, bleeding and backfilling (shown mounted on aluminum chamber).

Anatox Activated Charcoal, 2 lbs.

Anatox Activated Charcoal absorbs odors within BACTRON and BACTROX Chambers

Acrylic Vacuum Antechamber, 24"L x 12" dia.

Power Strip; 4 Outlets, 120VAC/60Hz, Installed

Low Vacuum Control Module: 120V

Activated Bonded Charcoal Filter; for fume scrubbing, 12"x12"x1.75"

1st Stage Prefilter; for Desiccant Dryer Model 60

Power-Cord Pass-Through, for All Glove Boxes

Replacement Exit Filter, Ante-Chamber, Polyester, 22''D and 30''D Compounding Glovebox