Reusable Cleanroom Coveralls by Uniform Technology

RECOMMENDED LAUNDERING INSTRUCTIONS

The following precautions are recommended when washing polyester static-dissipative garments:

1. Rigid inspection and repair of all defects before washing. If repairs or alterations are necessary, use continuous filament thread.
2. All zippers should be zipped up.
3. Use smaller loads to decrease mechanical action.
4. Use less harsh soap (mild alkaline or neutral soaps) or detergents.
5. Use no bleach if possible. If bleach must be used, reduce concentration as much as possible.
6. Reduce the washing temperature below 120°F for colors, and not more than 140°F for whites. End the washing cycle with a cold rinse.
7. Use short, low speed extraction.
8. Tumble dry at moderate (140°F, or less, exhaust stack temperature) setting. Use at least a 5 minute cold tumble at the end of the drying cycle for proper cool down. Remove and hang garments immediately.
9. Use ironing only as a last resort. If ironing is necessary, do not overheat. Polyester static-dissipative garments contain synthetic fibers that can be scorched or fused with excessive heat. Use lowest temperature.
10. Inspection before and after processing should include good light to observe any potential linting surfaces on the garments.