FREE CONSULTATION714-578-6100
  1. Home
  2. Glove Boxes
  3. HEPA or ULPA Filtration
  4. Labconco Protector Filtered Glove Boxes

Labconco Protector Filtered Glove Boxes

Labconco Filtered Glove Box
The Labconco Protector Filtered Glove Box

  • Protector Filtered Glove Boxes are used for containment of hazardous materials
  • Provides HEPA filtration and a physical barrier to protect the user from exposure to dangerous materials
  • Particulate containment <20nm/cm3 as confirmed by Safebridge Consultants
  • Meets ISO Class 4 Standards for airborne particulate cleanliness
  • Factory leak-tested with a mass spectrometer while pressurized with Helium at 1 inch of water gauge
  • Inlet and outlet particulate (HEPA/ULPA) filters to prevent contaminants from entering or leaving the glove box chamber
  • LCD display that provides real time monitoring of volume dilution rates in cubic feet per minute (CFM), air changes/minute (ACM), and main chamber pressure (in inches of water)
  • Large viewing area, 36"W x 27.6" H (914 mm x 701 mm) for maximum viewing capabilities
  • Offered in one-piece fiberglass or stainless steel lined models with single or double operator capabilities
Ordering Information
Protector Filtered Glove Boxes
Type Power Supply Fiberglass 304 Stainless Steel
Labconco # Cat. # Price Labconco # Cat. # Price
Single Models
(2 glove ports)
120 VAC, 60 Hz 5065010 3644-00 Price 5065510 3644-01 Price
220VAC, 50/60Hz 5065031
5065035
5065040
5065045
3644-00-220 Price 5065531
5065535
5065540
5065545
3644-01-220 Price
Twin Models
(4 glove ports)
120 VAC, 60 Hz 5065512 3644-02 Price
220VAC, 50/60Hz 5065533
5065537
5065542
5065547
3644-02-220 Price
Protector Labconco Glove Box
Protection from potentially dangerous material is offered by the Labconco Protector Fiberglass Filtered Glove Box

Labconco offers you a new line of Protector Filtered Glove Boxes for use with a variety of hazardous materials. These glove boxes have been re-designed to replace the Protector Multi-Hazard Glove Boxes. Protector Filtered Glove Boxes have a phenomenal particulate containment ability.

Quick Clean-up Time and Cleanliness

Protector Filtered Glove Boxes have a “fast clean up” time. According to a perimeter scan test, 0.05 ppm average tracer gas levels (or less) were detected after a 5 minute dilution. Airborne particulate cleanliness (measured under positive and negative pressures per ISO 14644-1 test method) exceeds ISO Class 5 conditions (equivalent to Class 100) and achieves ISO Class 4 conditions.

Three Models Featured for Protector Filtered Glove Boxes

The fiberglass-lined models feature inlet and outlet HEPA filters that have a 99.99% efficiency rate on particulates 0.3 microns or larger. It is composed of one-piece molded fiberglass for the liner. There are clear acrylic inner and outer transfer chamber doors for convenient viewing of materials in the glove box.

The stainless steel-lined models utilize inlet and outlet ULPA filters. These glove boxes have an efficiency of 99.999% on particulates that are 0.12 microns or larger. This model has Type 304 stainless steel liners, Type 304 stainless steel inner and outer transfer chamber doors, and the front panel is also comprised of Type 304 stainless steel.

The stainless steel-lined model also comes in the form of a double filtered glove boxes. It has a two operator capacity with the same attributes as the single stainless steel model. This glove box has wider outer and inner dimensions, designed to accommodate dual operators.

Protector Filtered Glove Boxes Also Feature:

Space saving inner and outer transfer chamber doors that pivot upward, and an interior left-hand side wall-mounted pass-through plug for on-site installation of an optional accessory such as electrical outlet, RS-232 port, gas/liquid port, or port for oxygen or moisture monitor. Additionally, there is an interior right-hand side wall-mounted electrical receptacle with a 10 amp circuit load. The glove box also comes with a pair of neoprene gloves, two 8" ID epoxy-coated aluminum, double grooved glove ports, and two 25-watt fluorescent lights.
Specifications
  Domestic or International
Specifications
Protector Fiberglass
Filtered Glove Box
Protector Stainless Steel
Filtered Glove Box
Protector Stainless Steel Double
Filtered Glove Boxes
Item Dimensions Domestic: 63.9"W x 31.0"D x 45.7"H
(1623 mm x 787 mm x 1161 mm)
63.5"W x 31.0"D x 45.7"H
(1613 mm x 787 mm x 1161 mm)
108.9"W x 31.0"D x 45.7"H
(2766 mm x 787 mm x 1161 mm)
International: 63.9"W x 31.0"D x 45.7"H
(1623 mm x 787 mm x 1161 mm)
63.5"W x 31.0"D x 45.7"H
(1613 mm x 787 mm x 1161 mm)
108.9"W x 31.0"D x 45.7"H
(2766 mm x 787 mm x 1161 mm)
Electrical Specifications Domestic: 100-115V; 50/60Hz, 10 Amps 100-115V; 50/60Hz, 10 Amps 100-115V; 50/60Hz, 10 Amps
International: 208-230V; 50/60Hz, 10 Amps 208-230V; 50/60Hz, 10 Amps 208-230V; 50/60Hz, 10 Amps
Filter Type Domestic: HEPA ULPA ULPA
International: HEPA ULPA ULPA
Number of Glove Ports Domestic: 2 2 4
International: 2 2 4
Primary Applications Domestic: Working with Hazardous Materials Working with Hazardous Materials Working with Hazardous Materials
International: Working with Hazardous Materials Working with Hazardous Materials Working with Hazardous Materials
Liner Material Domestic: Fiberglass Steel Steel
International: Fiberglass Steel Steel
Interior Working Width Domestic: 35.0" (889 mm)
35.0" (889 mm) 35.0" (889 mm)
International: 35.0" (889 mm) 35.0" (889 mm) 35.0" (889 mm)
Required Accessories Domestic: Supporting Base Supporting Base Supporting Base
International: Supporting Base Supporting Base Supporting Base
Compliance Domestic: ETL Listing, UL 61010-1 and CAN/CSA C22.2 No.1010.1 conformity ETL Listing, UL 61010-1 and CAN/CSA C22.2 No.1010.1 conformity ETL Listing, UL 61010-1 and CAN/CSA C22.2 No.1010.1 conformity
International: CE Conformity Marking CE Conformity Marking CE Conformity Marking

Required Accessories
Adjustable Height Mobile Base Stand
Adjustable Height Mobile Base Stand with 5" (127 mm) casters has durable 2" (51 mm) tubular glacier white epoxy-coated steel frame with permanently-mounted black laminate hard board work surface. Includes lower shelf, 47" W x 18" D (1194 mm x 457 mm), to accommodate accessory equipment such as a pump. Telescoping legs adjust in 1" (25 mm) increments to seven overall height positions from 33" to 40" (838 mm x 1016 mm).
Overall dimensions: 60" W x 31" D (1524 mm x 787 mm).
Quick Ship Item Items with prices in blue usually ship within 3 – 5 days of order.
Labconco # Cat. # Price
5235500 3643-22 Price
  Adjustable Height Stationary Base Stand
Adjustable Height Stationary Base Stand with leveling feet has durable 2" (51 mm) tubular glacier white epoxy-coated steel frame with permanently-mounted black laminate hard board work surface. Includes lower shelf, 47" w x 18" d (1194 x 457 mm), to accommodate accessory equipment such as a pump. Telescoping legs adjust in 1" (25 mm) increments to seven overall height positions from 33" to 40" (838 mm x 1016 mm).
Overall dimensions: 60" W x 31" D (1524 mm x 787 mm).
Labconco # Cat. # Price
5235501 3643-23 Price
     
Double Glove Box Mobile Base Stand
Double Glove Box Mobile Base Stand has epoxy-coated welded steel base with black phenolic laminate work surface. Height is adjustable, and lower shelf provides extra space.
Labconco # Cat. # Price
5062020 3643-24 Price
   

Corresponding Options
Balance Vibration Isolator
Isolator minimizes vibration to sensitive balances. Includes a 13.4" W x 20.4" D x 2.7" (340 mm x 518 mm x 69 mm) thick marble slab, four isolator pads, and a type 304 stainless steel protective top cover.
Labconco # Cat. # Price
5234600 3643-30 Price
  Anti-Static Ionizer Fan
Anti-Static Ionizer Fan circulates ionized air inside the glove box to reduce static charge. Includes hardware to mount to the main chamber ceiling. Requires installation.
Labconco #   Cat. # Price
5234400 100/115V, 50/60Hz 3643-29 Price
5234401 230V, 50/60Hz 3643-29-220 Price
     
HEPA Inlet or Exhaust Filter
HEPA Filter, 99.99% efficient. Replacement inlet or outlet filter or optional second outlet filter for removal of particulate contaminants.
Labconco # Cat. # Price
    call TUI
   
Click to leave a message. 24-hour sales and tech phone support, M - F
Go to...
Go To
Laboratory-Equipment.com